Cars & Trucks Logo

Related Topics:

W
WILLIAM SMITH Posted on Sep 22, 2017

MY KAWASAKI KAF620 3010 MULE WAS JUMPING OUT OF FORWARD PUT IN NEW SHIFT CABLE NOW HAVE REVERSE BUT CAN NOT FIND FORWARD . I JUST GOT THIS MULE . REMOVED CABLE TRIDED SHIFTING STILL NO FORWARD

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Nov 02, 2008

SOURCE: Automatic Tranmission forward gear works reverse doesn't

YOU HAVE A SHIFT SOLENOID THAT HAS EITHER FAILED OR IS STUCK, DO YOU HAVE ANY TRANS TROUBLE CODES?

Ad

Anonymous

  • 192 Answers
  • Posted on Apr 10, 2009

SOURCE: cannot shift into reverse although forward gears all functional

have ur shift linkage bushings replaced....most likely thse are torn or completely broken .. this is common on these models..also on some vw's of the same years

Anonymous

  • 1861 Answers
  • Posted on Oct 16, 2009

SOURCE: 2005 corolla , check engine light on and car

Take your car to a Toyota dealership. Have them scan the car for trouble codes. If they come up with a P-2716 code, you need a new Engine Control Unit (the computer). If your car has under 80,000 miles on it, Toyota will replace it for free.

fordexpert

  • 5692 Answers
  • Posted on Nov 28, 2009

SOURCE: ON MY FORD F150 IT WON1T GO INTO REVERSE. SHIFTS

Call a dealer about a new recall. There is another problem in the cruise control that is making it hard to put a vehicle into reverse. There are also problems with brake lights and dash indicators for the ABS all caused by the cruise control. This includes about 16 million various Ford products.

Ford007

Chris Weber

  • 131 Answers
  • Posted on Mar 17, 2010

SOURCE: shift cable has sliped r is park n is reverse ect

What you have here is a broken shift indicator adjuster accessed by removing the steering column shrouds or the shift linkage plate at the bottom of the steering column above the pedals has come loose from the shifter tube which goes along the top of the steering column.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Suzuki 2008 model 400 atv wont engage in drive but will in reverse?

no transmission.
get the shop manual and read?
the trans has clutch pack for engine then a drive belt.
it is CVT drive, (the pulley magic box)
id check cables first for shifting not too much slack.
the CVT can not go in reverse. so the reverse /forward is downstream from the CVT.
and not wheel bearings, it is this shift box, issue. or just a bad cable, to it etc. are you really owning this> (400 only seems wrong)
2008 Suzuki LT-Z400 . eiger 400, or

if the clutch fails and drags it will not want to shift easy
or the cable is bad, or not adusted, right it can not shift right
look for simple things first
like this, if it does not go forward make sure FIRST the cable even goes to forward mode. (at the end of the cable)
0helpful
1answer

I Have a 6910s johndeere when I try to engage the starter it blows the main fuse instantly can you help

I just had a problem with a Kawasaki mule when I put it in reverse it blew the main fuse. It was the reverse switch to the back up alarm had a short in it. I disconnected the switch. I would say you have a short. You might check with ohm meter to find where the short is.
1helpful
1answer

Battery in 610 4x4 mule not maintaining charge. Fully charged battery placed in mule will stay charged for about a week.

I recently tried
the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master. it wont move forward or reverse, engine is good both solenoids for forward and reverse work.
I don't have much technical knowledge but I just followed it step-wise, and works perfect! got it from www.reliable-store.comAll the best
0helpful
1answer

06 kia spectra how do your adjust the shift cables on a manual trans all forward gears are fine problem is with reverse no problem untie we changed the clutch

The clutch is not clearing properly ,so wait a while for it to level itself off ,to get reverse in the meantime you stop engine ,put in reverse then start engine ,if after a while it still doesnt work and tries to jump out of gear you will have to strip the gearbox and change the dog gear
0helpful
1answer

Random acceleration

throttle position sensor is bad
0helpful
1answer

My rebuilt transmission won't go forward?

i would be checking the shifter cable adjustment first see how that goes goodluck
0helpful
1answer

My rebuilt transmission won't go forward?

its more than likely the valve block internal sticking valve or incorrectly rebuilt
Not finding what you are looking for?

231 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...