Question about 2004 Toyota Celica

Open Question

How do I remove the rear rotors on a 2004 toyota celica

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not remove rear rotor off hub. I have tried a puller. I loosened the emergency brake pad star wheel. I have heated it with penetrating fluid. This dang thing will not come off. I do not hink I am...


tes it should but these rotors have screws holding them to the hub, make sure the screws are out, sometimes they are already removed, these are not needed, they are used to hold rotor in place at factory. make sure there are no screws holding it to hub, these screws would be screwed in from the front of the rotor next to studs, if thet are removed then you will need to beat them off with a hammer, heat around the center hole then beat them to break them loose. spin the rotor and hit spin and hit, they should break free.

Sep 03, 2011 | 1993 Toyota Celica

1 Answer

How do i change the brakes and rotors on my 2004


When you say fit properly I assume you mean it's not going back together. Make sure you have the bearings and races installed correctly on the back side and that you are installing the correct rotor on the correct side with the correct bearings. The front and rear bearings look the same but they aren't and if you try putting that rotor on with the front side bearing installed in the rear of the rotor it will never go back together.

Jul 12, 2010 | 2004 Toyota Sienna

1 Answer

How do you replace the rear shocks in an 01 Toyota Celica gt


YOU HAVE TO REMOVE REAR SEAT CUSHION TO GET TO STRUT TOWERS.

Apr 18, 2010 | 2001 Toyota Celica

1 Answer

I cannot remove the rear brake disk so I could change the pads


You remove the caliper not the disk.If its badly worn your have to release the pressure of the caliper piston.try prying with a good screwdriver pushing the pad away from the rotor.

Oct 04, 2009 | 1987 Toyota Celica

2 Answers

How to replace fog light bulbs


hi..You will have to access the fog light bulb from below the vehicle.
Remove the plastic clips from the wheel well cover extension that is
below the fog light.once the clips are out and the plastic cover is pull
down,you should be able to see the back of the fog light.you can try
to replace the fog light bulb by removing the two 10mm bolts and slide
the fog light assemble out through the front of the bumper.Turn the cover
of the rear of the fog light and replace light.
try this out..
thank u..
kindly rate my response..

Jun 14, 2009 | 2004 Toyota Celica

2 Answers

How to fit handbrake shoes on a 98 toyota celica


Are you saying you only had front brakes with the back brakes removed? The hand brakes would have been null. How could it pass inspections ?
A quick trip to the library will help. Ask for the auto service manual.
You can also check eBay for a Service Manual.

Apr 08, 2009 | 1998 Toyota Celica

1 Answer

I cant seem to be able to start this celica ive been working on?


check your ignition coil and plugs for sparks. if no spark replace. if the rotor is turning then the timing belt is fine. rotor in the distributor cap. 3 screws will get you in there.

Dec 14, 2008 | 1992 Toyota Celica

2 Answers

2004 Toyota Camry Brakes


Raise the vehicle up and remove the rims & tires

Remove the brake pads, and then remove the calipers from the caliper retention brackets, do NOT remove the brake hoses from the calipers.

Remove the caliper retaining brackets from the hub assemblies (2 large bolts on backside of the bracket)

Tap the brake rotors off of the hubs, hit them from the back side of the rotor.

No big mysteries here, this is a very easy job.

Oct 21, 2008 | 2004 Toyota Camry

1 Answer

2004 toyota sequoia front end shake


Replace the front rotors.
Refacing does not work on Sequoias. The metal removed to get the rotor "true" is usually below minimum safe thickness, and the vibration comes right back when it gets hot.

Oct 16, 2008 | 2004 Toyota Sequoia

1 Answer

2004 Toyota Celica Trunk


Hatch liftgate support stays:

68950-80107 & 68960-80062

Sep 13, 2008 | 2004 Toyota Celica

Not finding what you are looking for?
2004 Toyota Celica Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...