If light pressure on your clutch pedal causes it to fall or easily be pushed to the floor and you cannot feel a normal point in which the clutch should engage it is quite possibly the slave cylinder. Most mechanic shops will tell you to replace the clutch and while doing the service they will replace the slave cylinder. Do you see or smell any brake fluid leaking? Brake fluid is used in the clutch hydraulic system. So if your brake fluid is low or you can see it leaking or smell it burning this would Point towards slave cylinder. There are other ways to check if your slave cylinder is working appropriately by looking under the vehicle having the clutch pedal pushed and seeing if the cylinder is engaging the transmission and then feeling for resistance.
SOURCE: i can't change gears and
Hi there i have had quite a few of these, just check the clutch master cylinder fluid you might find it is very dirty and may be causing the hydraulics to stick. Either the master cylinder or the slave cylinder may be sticking.
SOURCE: Low / Soft Clutch Pedal, 1995 Rodeo 2W 2.6L
my rodeo had the same problem i corrected it by bleeding the slave cylinder. and is located on the driver side on the gearbox you will find it if you follow the line from the master cylinder down to the gearbox and if that helps but happens again it might have to be replaced.
SOURCE: clutch change
hi it seems your clutch is losing pressure,it works like a shock, known as a hydrolic clutch, i recommend you change it asap.
SOURCE: my audi tt quattro 2004 model yesterday stopped changing gears
Release bearing problem.Change the clutch Assembly
153 views
Usually answered in minutes!
×