SOURCE: replacing bad camshaft position sensor
Reverse procedure to install and prior to installing new sensor, lubricate sensor O-ring.
It is located under the water pump. Make sure when you remove the sensor that you rotate the crank shaft and look in the hole to make sure the pick up magnet is still in there. Sometimes they come loose and cause a no start or long crank. You will need to have the code cleared still.
SOURCE: camshaft position sensor failure on Saab 2003 93
replace it. there is a connection or a short in the sensor that's throwing the code. Get your Saab parts at Carquest Auto Parts, They have a WORLDPAC division for all hard to find(and easy) parts. trust me, you will save a fortune on Saab, Mercedes, Volvo and other high end parts.
SOURCE: Replacing Camshaft Position Sensor Guide audi a4
The camshaft position sensor is located behind timing belt cover in front of engine.Remove cover, sensor is visable in top right hand corner.Unplug, remove 2 10mm bolts.Reinstall,plug back up,reinstall cover,crank engine.
SOURCE: BMW X5 CAMSHAFT POSITION SENSOR A .SHOW DIAGRAM
hi i have a diagram if you would like it i could email it to you and there are 2 of them does it say which one it is? you can email me at
[email protected]
and i will send you the diagram hope this helps
1,907 views
Usually answered in minutes!
×