Question about 1990 Dodge Dynasty

1 Answer

I have a AC condensation blockage in my 1990 Dodge Dynasty

I have a 1990 Dodge Dynasty in very good condition with 40,500 miles. 1). Around 38,000 miles the condensation line to my Air conditioning became blocked; I notice this because water is running from underneath the dashboard on passenger side of the car when the AC is turned on.
2). I also notice around the same time that the controls that regulate the direction of air flow to the vents weren't working properly.
Can you tell me how to repair my two problems? I thank you in advance for your help.
jim

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,537 Answers

The water problem is caused by a blocked drain hose. If you get under the car you should see a line or hose coming through the firewall or front floorboard. It is plugged up with insects or road debris. Use a coat hanger or pen and dig in it for about a foot til it clears.
The second problem was caused by the first, water is not good in the ductwork. Most likely a door "motor" is shorted or disconnected. When you get the water out you may have a 10% chance of the other problem clearing up. Good Luck Sometimes a trip to the Salvage yard is an excellent education for location of parts. Also cars work with used parts.

Posted on Jul 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1990 dodge Dynasty bad gas mileage and now cutting out real bad. Changed spark plug wires, spark plugs and fuel filter. Ran good for a test run right after installing items. This morning ran fine the 5...


May just be some dirty fuel, or clogged dirty air filter...try putting 2 bottles of fuel injector/carb cleaner in the tank to be sure dirty fuel has been treated. Did your Dynasty sit for a period of time? (Not driven or run for several months, or did you let the fuel tank get very low? Same remedy. Hope this helps..

May 23, 2012 | 1990 Dodge Dynasty

1 Answer

I have a 1990 Dodge Dynasty 3.3L V6. My speedometer stop working so did my trip miles, can anyone please help. I'm mechanically incline I just dont have the time to figure it out can someone point me to...


if it has a 413 trans the speed sensor is right where the passenger axle goes in. If you do not see one there it has a 604 trans and the output sensor is on the front up towords the radiator you will see two round sensors the one you need to change is the one closer to the driver side.

Nov 18, 2010 | 1990 Dodge Dynasty

1 Answer

Air conditioning uses R-12 or R-134.


Look under the hood of the car. In the center near the latch there will be a sticker that tells you which it is. My 1992 dynasty uses 34oz of R-12.

Aug 06, 2010 | 1990 Dodge Dynasty

1 Answer

1990 Dodge Dynasty not firing on #6 cylinder at all. Plug, wire and coil testing good. Suggestions as to next step please?


check the compression. If its 15% lower than he others then the motor has issues.

Spray brake cleaner arouund intake looking for a leak. RPM will change if you find one

Dec 10, 2009 | 1990 Dodge Dynasty

3 Answers

Serpentine belt diagram for a 3,3l dodge dynasty with ac


For the 1991 DODGE DYNASTY - V6 3.3L 201ci GAS FI N R , review this informacion:

Belt Routing Diagram
- Multiple Accessory, w/o A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/o A.C. (Mfg. Before 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. Before 2/27/91)
684ce70.jpg


Remove the serpentine belt by using a breakover bar, rachet or serpentine belt removal tool with the correct size socket for the pulley mounting bolt. Rotate tensioner arm to release tension. Remove the belt.

Hope helped with this (remember rated this help) Good luck.

Nov 12, 2009 | 1991 Dodge Dynasty

1 Answer

How do i time my 90 dodge dynasty. Do I just line


3.0 L v6, align crank sprocket with mark on block dot to dot about 1 o'clock and the cams with marks on housinga6c369c.jpg

Nov 08, 2009 | 1990 Dodge Dynasty

1 Answer

I have a 1990 dodge dynasty with an a/c drain line blockage.


Should be on the right lower side of the firewall. Most cars have a black ribber elbow on them. Take a wire coat hanger and just insert a couple of inches in the tube, not to far to wher you poke the evap.

Jul 31, 2009 | 1990 Dodge Dynasty

1 Answer

1990 Dodge Dynasty, has severe problems with the pulleys. Belt continues to slip off of the pulleys. Why does this little car have 5 pulleys and they don't do the same thing???


make sure, with the belt off, that all the pully spin VERY freely. sounds like a component with a pully is locked up. good luck.

Jul 17, 2009 | 1990 Dodge Dynasty

1 Answer

Adding AC to my 1990 Dodge D150


good evening and welcome to fixya
adding ac to your dodge is kind of complicated. are you going to be doing the job or are you contracting it out? there are a few ways to go about doing this: one is you can hunt down another d150 that came from the factory with a/c and use all the parts from it. the second is you can look at purchasing an aftermarket all in one ac unit, sometimes you must do a bit of modifications to install this unit. the third is the most expensive but all new, you can go to your local chrysler dealer and ask for the schematic of the ac system for your vehicle and tell them what you want to do and they will give you a parts list, this list will include a new radiator to accomadate the a/c condenser. the major parts you will need are the condenser, switch panel, compressor and all brackets to hook up the compressor, the ac box under the dash the has the evap coil in it, you will need a set of lines and accumulator, pressure switchs high and low, expansion block, freeze switch, and possibly you will have to change the pulley setup on the front of the engine to accomdate the new belt for the compressor. this is a good starting point of the items that are required. hope this helps good luck to you.



please rate this solution??

Mar 19, 2009 | 1990 Dodge D150

Not finding what you are looking for?
1990 Dodge Dynasty Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...