Question about 1995 Pontiac Bonneville

2 Answers

I need a diagram of 1995 Pontiac Bonneville Serpintine belt route.It's not the supercharged model just the 3.8 v 6

Posted by on

  • Robb Bronze Jul 28, 2009

    Thanks there was about 4 different ways to run the belt rib-to-rib & flat -to- flat but i finally got it.What made this so puzzling is in the 1995 Bonneville the motormount creates a problem on the left side where you run the belt from the waterpump pulley to the power steering pulley.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Pontiac Master
  • 2,007 Answers

If you don't see a diagram under your hood somewhere, just put it around the crank pulley, and go "ribs to ribs, flat to flat" , and work your way around.

Posted on Jul 28, 2009

  • Dar
    Dar Jul 28, 2009

    Okay. As long as you got it!

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to put timing belt on

Posted on Aug 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram for a serpentine belt routing for a 2000 pontiac bonneville sle


You probably have it fixed by now, but you should have a 3.8L V6 (no supercharger).
The belt routing should be the same as my Impala 3.8L.

zeevert_38.jpg

Feb 11, 2011 | 2000 Pontiac Bonneville

2 Answers

I need a serpentine belt diagram for a 1997 pontiac bonneville se 3.8L - no turbo


0900c152800b19a9.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 8: You can use a box-end wrench on the pulley nut to rotate the tensioner ...


0900c152800b19aa.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 9: ... then remove the belt from the pulleys


0900c152800b19ab.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 10: Serpentine drive belt routing and removal - 3.8L (VIN L) engine shown, VIN C similar


0900c152800b19ac.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 11: Make sure to note the drive belt routing prior to removing it - 3.8L (VIN K) engine shown


0900c152800b19ad.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 12: Drive belt removal on a 1992-95 supercharged engine
To install:
Be sure the belt is aligned into the proper grooves of the accessory drive pulleys.
  1. Lift the tensioner, and install the belt onto pulleys. Make sure the belt is routed properly.



0900c152800b19ae.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 13: Many vehicles have a label you can check to be sure the belt is installed and routed correctly
  1. For 1996-99 vehicles, raise and safely support the vehicle. Install the engine mounting bracket lower spacer, stud and nut.
  2. For 1996-99 supercharged engines, perform the following:
    1. Attach the connector to the crank sensor.
    2. Install the right-hand splash shield, then carefully lower the vehicle.

  3. Install the belt guard or reservoir.
  4. Connect the negative battery cable.

Nov 18, 2009 | 1997 Pontiac Bonneville

2 Answers

Need diagram how to install serpetine belt for my 1997 pontiac


CLICK HERE - as you did not indicate the accessories installed.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

May 27, 2009 | 1997 Pontiac Bonneville

2 Answers

Serpentine belt diagram for a 2001 Pontiac Bonneville SSEI


these motors have two carrier pulleys and oone tensioner. lookinjg at the motor from the rightside of car the belt goes as follaws: crank pully to super charger from the left. the right side goes up to the lower carrier which will have the flat of the belt riding on it. from there the belt routes to the upper carrier
[ loop it over so the grooves ride
] and then under the tensioner any questions contact goldenvegasart@gmail.com

Mar 13, 2009 | 2001 Pontiac Bonneville

Not finding what you are looking for?
1995 Pontiac Bonneville Logo

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...