Where do i locate the reverse switch on my Mitsubishi outlander x2 gx2 2011

Question edited for clarity and spelling of maker.
Question moved to model category.

https://www.google.com/search?q=2014+Mitsubishi+Outlander+ignition+cylinder+and+switch+replacement

Looks like it is on the back side of the engine toward the bellhousing-

Question edited for clarity, MAKER.
Question moved to Category.

Check Fuse 7.

Fuse Box Diagram Mitsubishi Outlander (2014-2019..)

https://fuse-box.info > mitsubishi > mitsubishi-outlander...
2017, 2018, 2019 - The fuse box is located in the instrument panel (on the driver's side) to the left of the steering wheel, behind the cover. A - Main fuse ..

Your mirror isn't quite so easy. It needs the switch tested, and it could also be the servo motors that control movement.

No they are crooks! The genuine part from Mitsubishi is $120 and it looks like you could do it yourself.

Where is the transmission fluid pressure sensor? The pump pressure switch is located on the transmission housing next to the pump. The switch lets the computer know what the pressure is coming from the pump when the engine is running. The servo pressure switch is located on the housing near a band or servo in the transmission.
Oct 11, 2016 Videos

https://www.google.com/search?q=2016+mitsubishi+outlander+transmission+fluid+pressure+sensor+location

..

Stuck Transmission Lock - Mitsubishi-Forums.com

www.mitsubishi-forums.com > ... > 2G (2007+) Outlander

Feb 22, 2008 - 5 posts - ‎4 authors
Drives: 1997 Outlander LS, 2007 Series 3 380 SX ... Hopefully the heads up will help one/some of you out if you ... This morning I jumped into my 2007 Outlander (Aussie Spec with the CVT) and I couldn't move the gear ... I couldn't find anything in the manual about it, but a Google search brought me here.

Getting Into Reverse Gear - Mitsubishi-Forums.com

www.mitsubishi-forums.com > ... > Colt & Mirage Forum > 2003+ Colt

Mar 17, 2007 - 15 posts - ‎10 authors
go to another car dealer with the same model and a manual ask for a test ...QUOTE(stevansam @ Mar 19 2007, 07:34 AM) ... the dealer won't take the car back because it's not a fault of the car but a ... I also have a Renault megane and at workdrive a Ford pick-up, which both have syncho in reverse, I can't ...

Adjust Digital Transmission Range Sensor - YouTube

? 0:42
https://www.youtube.com/watch?v=FyiGxhkV-VM
Mar 27, 2010 - Uploaded by Alexander Cameron
If the DTR is not adjusted properly, you will get a no-start situation. ... when I am in drive and shift to reverse my backup lights dont work but if I put into park and not even all the way into park and go reverse they work. ... Hi I changed the solenoid

near the oil filter on most cars

Try this quick fix solution.
Put vehicle in park or neutral, press the switch or turn the dial to 2H, put vehicle in reverse and reverse the vehicle aproximately 10m's or around 30ft.
Now drive vehicle forward, and this should unlock the 4wd mode.
If this doesn't work then your solenoid may need replacing.

Order the owner's manual

you might want to check the fuses first, if they are all good then
check the switch which is located in the back door jam area. You should be able to unscrew or get to the switch back easily once there connect the two wires together and see if it lights.