Question about 1985 Chevrolet S-10

2 Answers

1986 Chevy S10 Blazer Clutch out or just need to drain and refil?

Ok i just got my starter readjusted so when i turn the key it starts.. work was done underneath the dash and,, and after that i noticed that the clutch started feeling like it was losing pressure..and then after driving on that for a 3 or 4 weeks...the clutch eventually came to a 90% complete loss of pressure and it became a little more and more harder to shift into gear and then eventually wouldn't while the truck was started, but could shift when off. now i need some info steps to take from here..

thanks in advance.

Andrew Snyder

Posted by on

  • Dar
    Dar May 11, 2010

    What does this mean? "i just got my starter readjusted so when i turn the key it starts.. work was done underneath the dash "

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,118 Answers

Best chk. the fluid resavor for clutch, sounds like fluid loss for clutch( hydrolic clutch) you may have a leak either in the line or the slave cyl. Also do you mean by reajust starter are you talking about ajusting the arm to starter switch under dash?

Posted on Jul 28, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

Check the fluid level in the clutch resorvoir if its low fill it up and see if that helps then check for leaking fluid on back side of clutch cylinder and under dash where the clutch pedal attaches to the cylinder next to firewall

Posted on Jul 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 Chevy Blazer 4 door I've change the ignition switch starter all that good old stuff if I turn the key and jumper by the starter it will run I have liked it just no crank no start


1989 Chevy blazer 4.3 won't start..I have ... - CarGurus

www.cargurus.com > Questions > Chevrolet > BlazerCarGurusJan 30, 2013 - 96 Chevy S10 Blazer with 4.3 L engine vortex will turn over but won'tstart. ... i a 93 k5 blazer 5.7tbi in cold weather it will not start, if i hook jumper ... was told it just needed a Fuel pump, I replaced the Fuel pump, and the Filter, ...

Oct 12, 2015 | Cars & Trucks

1 Answer

1999 Chevy Blazer S10.. Won't start.. It was


sound you have a blown clutch slave cylinder

Dec 05, 2012 | Cars & Trucks

1 Answer

1997 chevy s10 blazerdash wont light up when key


the dash sound's like a fuse, check the fuse box under the hood and in the door jamb on the side of the dash, also check your fuel filter and fuel pump, im betting on the pump because i have a 2001 chevy blazer that has had two replaced and it has 233000km on it!

Jun 04, 2010 | 1997 Chevrolet Blazer

1 Answer

1990 chevy s10 blazer 4wd. Xmsn whines.


if this happens only in the morning after you start for the first time its the clutch on the fanblade needs replacing

Dec 02, 2009 | 1990 Chevrolet S 10 4WD

1 Answer

Bent A-Arm on a 1991 Chevy S10 Blazer...repair$???


I would guess $500 - $1500 to do this job depending on how much damage was done when the arm was bent.

"SMALL OIL AND TRANSMISSION LEAK AND THE RADIATOR LEAKS OUT SLOWLY." -- the radiator leak could get bad enough to require repair.

I think $400 obo is an okay price, can't get much lower for a vehicle that will get you to the store and back.

May 27, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

1986 Chevy s10 won't start


small gas engines 101. gas+air+compression+spark=vrrrrrrroooooommmm
i doubt its a fuse. make sure all cylinder have good spark. try and run some seafoam through the gas tank and i would look at the timing - im not sure how you know the timing didnt skip but that sounds like your problem.

Mar 31, 2009 | 1986 Chevrolet S-10 Blazer

1 Answer

My 97 Chevy blazer has a Immobilizer ; doesn't start.


I agree with gasitjr.
I own a 98 blazer. When you try to turn over the engine. Does the engine rotate? If yes,it's not the starter or the battery. When you turn the key into the ON position before it starts can you hear an electric motor noise winding up? If yes , the fuel pump maybe OK but if the pump pressure is bad...blazer wont start. Pump runs about 300 plus labor. I've done it..It sucks

Jan 17, 2009 | 1999 Chevrolet Blazer

2 Answers

86 Chevy wont start


check for spark by removing a sparkplug

Dec 31, 2008 | 1986 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...