Question about 1998 Lincoln Navigator

1 Answer

98 lincoln navigator compressor was shorted replaced but will not turn on dont have ngs tester but does anyone know how to manualy turn on relay with power probe

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 308 Answers

To probe that there is a power on the relay on your 1998lincoln navigator is this what you should do. Have or use two wires then a 12Volt bulb.Then connect the end of the two wires to the bulb, then taped it to the bulb.then the other end of the two wires is going to be used . To connected to the relay to find if there is a power . One end of the wire will be positive, one end of the wire will be negative. If there is a power the bulb will light.

Posted on Jul 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power window wiring diagram for 1998 Lincoln town car


Go to http://bbbind.com/free_tsb.html free wiring diagrams !
  • Power Windows Completely Inoperative
  • Window regulator control switch.
  • Circuits open or shorted.
  • Window regulator electric drive.
  • Driver door module.
  • PERFORM Self Test to retrieve Diagnostic Trouble Codes. If no DTCs retrieved, GO to Pinpoint Test C .
  1. VISUAL INSPECTION CHART
  1. Mechanical
  2. Electrical
  • Front door power window regulator damaged.
  • Front window run damaged.
  • Front door window glass out of window run.
  • Front door window glass broken.
  • Lighting control module.
  • Driver door module.
  • Circuits open/shorted.
  • Loose, corroded connectors.
  • Damaged window regulator control switch.
  • Damaged window regulator electric drive.
  • Power distribution box Fuse D 40 for heated back window concern; Circuit Breaker 14 (20A), Circuit Breaker F (30A) or window regulator safety relay for power window concern.
  • Fuse junction panel Circuit Breaker 14 (20A), Fuses 6 (10A), 9 (5A), 15 (15A), Fuse 13 (10A), Fuse 4 (10A) or Circuit Breaker 12 (18A).
  • Scratched grid.

  1. If the inspection reveals obvious concerns that can be readily serviced, correct the concern before continuing with Inspection and Verification.
  1. If the concern remains after the inspection, connect the Rotunda New Generation Star (NGS) Tester, 007-00500 or equivalent, to the data link connector (DLC) located beneath the instrument panel to perform DATA LINK DIAGNOSTICS test. If the NGS responds with NO RESPONSE/NOT EQUIPPED for the driver door module, go to Pinpoint Test A . If the NGS responds with NO RESPONSE/NOT EQUIPPED for lighting control module, go to Pinpoint Test B . If the DATA LINK DIAGNOSTICS test is passed for the driver door module and lighting control module, retrieve continuous DTCs and execute self test diagnostics for the driver door module and lighting control module to retrieve current DTCs.
  1. If self test is passed and no DTCs are retrieved, go to Symptom Chart to continue diagnosis.
  1. If DTCs are retrieved for the driver door module, go to the Driver Door Module (DDM) Diagnostic Trouble Code (DTC) Index to continue diagnosis. If DTCs are retrieved for the lighting control module, go to the Lighting Control Module (LCM) Diagnostic Trouble Code (DTC) Index to continue diagnostics.
  1. If the driver door module cannot be accessed by the NGS tester, go to Pinpoint Test A . If the lighting control module cannot be accessed by the NGS, go to Pinpoint Test B .
Rotunda Service Bay Diagnostic System (SBDS®) 001-00001 may also be used to diagnose this system.
You'll need more then wiring diagrams ! A good scan tool for starters .
Youl

Aug 08, 2016 | Lincoln Cars & Trucks

1 Answer

1997 Lincoln Town Car anti theft system won't set. parking lights blink off and on when I turn car off.What could be the source of this problem?


Anti-Theft System NOTE: The system immediately monitors the ignition switch lock cylinder (11582) upon removal of the key from the ignition switch lock cylinder. It is not necessary to arm the system for ignition switch lock cylinder monitoring.
VISUAL INSPECTION CHART Mechanical Electrical
  • Damaged luggage compartment door lock cylinder.
  • Damaged hood ajar switch or bracket.
  • Open fuses: Fuse junction panel:
    • Fuse 4 (15A)
    • Fuse 6 (10A)
    • Fuse 9 (5A)
    • Fuse 15 (15A)
    • Circuit Breaker 12 (18A)
  • Loose connections
  • Corroded connections
  • Damaged switches
  • Damaged relay(s)
  1. If inspection reveals an obvious concern that is readily serviced, correct the concern before continuing with Inspection and Verification.
  1. If the concern remains after the inspection, connect the Rotunda New Generation Star (NGS) Tester 007-00500 or equivalent to the data link connector (DLC) located beneath the instrument panel to perform the Data Link Diagnostics Test. If the NGS responds with NO RESPONSE/NOT EQUIPPED for the lighting control module, go to Pinpoint Test A . If the NGS responds with NO RESPONSE/NOT EQUIPPED for the driver door module, go to Pinpoint Test B . If the Data Link Diagnostic test is passed for the lighting control module and driver door module, retrieve continuous DTCs and execute self test diagnostics.
  1. If self test is passed and no DTCs are retrieved, go to the Symptom Chart to continue diagnostics.
  1. If DTCs are retrieved for the driver door module, go to the Driver Door Module Diagnostic Trouble Code (DTC) Index to continue diagnostics.
  1. If DTCs are retrieved for the lighting control module, go to the Lighting Control Module Diagnostic Trouble Code (DTC) Index to continue diagnostics.
  1. If the lighting control module cannot be accessed by the NGS tester, go to Pinpoint Test A . If the driver door module cannot be accessed by the NGS tester, go to Pinpoint Test B .
Rotunda Service Bay Diagnostic System (SBDS®) 001-00001 may also be used to diagnose this system.
There are a great deal of components involved here an the best way to tell what's working or not is have a scan tool hooked up to check for DTC'S - diagnostic trouble codes !
There is a lot

Jul 14, 2015 | Lincoln Cars & Trucks

1 Answer

Turn over but will not start have checked fuel


BUY A SPARK TESTER AND FUEL PRESSURE GAUGE TESTER.TO CHECK FOR FUELPRESSURE AND USE SPARK TESTER TO SEE SPARK PLUGS GETTING FIRE.

Mar 24, 2010 | 2001 Lincoln Navigator

2 Answers

Where is the relay switch located on the 98 lincoln navigator for the turn signals and what is the relay switch


In older cars a relay or flasher switch was used for signals and hazards. These were round and typicly located in the fuse box under the drivers dash. Your car will probably just have a relay controled by the computer. The relay will be in the drivers fuse box. The turn silgnal switch may also be your problem. I hope this informaiton helps.

Aug 23, 2009 | 1998 Lincoln Navigator

1 Answer

Rear end of my 98 Navigator wont lift


u ca nt check relay ya self less u got the right tools but to me its sounds like your relay is gone my friend

Aug 18, 2009 | 1998 Lincoln Navigator

2 Answers

The rear air ride suspension on my 98 lincoln navigator left side has collapsed. The compressor does not kick in. What seems to be the problem?


Could very well be faulty relay, bad fusible link, or a fuse in general. You can trace the wiring or view a free repair manual at autozone.com to trace wires to find faulty device. You can use an ohmmeter or multi-tester to test relays and fuses.

Aug 17, 2009 | 1998 Lincoln Navigator

2 Answers

2003 Lincoln Navigator door sensor problems


One of your courtesy light switch's is defective, it can be in any of the five doors (rear hatch has 2), Ford can determine which one (courtesy light switch) is at fault by using a NGS (New Gen Star Tester) to monitor the switches through the Generic Electronic Module of your truck, these switches are attached to the door latch assembly and are time consuming to replace, so the Ford tester is the cheapest option.

Nov 13, 2008 | 2003 Lincoln Navigator

Not finding what you are looking for?
1998 Lincoln Navigator Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...