Question about 2000 Dodge Grand Caravan

1 Answer

No Brake lights-- Bulbs & Fuses ok, also no cyclops at all

Brake lights do not go on at all, turn lights, back-up and running lights all work fine. Bulbs and fuses good, The center light in the hatch does not light up at all.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

Hi my name is mike ! make sure with a test light that you have 0 power to the light back ther ,and if not then take a test light and check down by the brake pedal at the wires that go to the brake light switch ,check all of the wires for power and there may be more than one that has power to it ,do this without hitting the brake ,remember which wire or wires had power to them ,then hold the brake and one of the wires that didnt have power before holding the brake ,should have power to it now because when you hold the brake on it should close the brake light switch and send power to the lights ,if you dont have power coming through that switch when holding the brake pedal down ,then replace the switch .

Posted on Aug 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BRAKE LIGHTS DON'T WORK BRAKE SWICH CHANGED BULBS CHECKED AND INSIDE FUSES OK


Do turn signals work ok? Do you have current at the brake switch?

Feb 07, 2014 | 1999 GMC Suburban

1 Answer

07 Chevy Cobalt brake lights do not work. turn signals work, tail lights work, Cyclops brake light also works. Fuse is good. New bulbs


so 3 lamps (usa deal with cyclops)

and you say 2 fail L/R and center works?
is that true. or a typo.... ?
if never seen any car wiring go to center then left then right
in a daisy chain.
most go left , then both seperate path to center and right.
in USA, we have LHD cars, not right. side. drive.
and RHD cars are wired, backwards.
i refuse to do world wide Cobalt market look ups. no country state and all lights is different world wide as are color codes.

ok try on light at a time, put in, take out,move it 3 times.
works?

I bet all 3 are dead for brakes.
if true.
its the brake lamp switch malfing.
or cut wires ,due to trailer hitch goons. (hackers)

Oct 09, 2013 | Cars & Trucks

1 Answer

2003 Silhoutte, both lower brakes lights do not work. Bulbs or turn signal switch? Turn signals work okay. Cyclops works okay, fuses look good.


Bulbs are bad, most bulbs burn out around the same time withing a day or two and both of your brake lights may have gone bad. Try with the simple and inspect the bulb and replace if you see any discoloration to the glass on the bulb. Good luck and than you for using Fixya.

Mar 06, 2010 | 2003 Oldsmobile Silhouette

1 Answer

Rear side brake lights won't work after fuses/bulbs replacement


If the high level brake lamp works and the other 2 lamps have good bulbs, then there is a power loss, most propably with the installation. You should go to an auto electrician to see where the break is.
If someone has recently done any work on the electrics, you should recheck. It is not a seperate fusable power supply system or brake switch for the high level brake lamp, it will take its power from the fused system that the other 2 have.
Hope this helps

Oct 04, 2009 | 1998 Land Rover Discovery

1 Answer

Rear brake lights don't work


you prob got a trailer plug prob bad wires if not tail lights run through turn signal switch tell fix ya bout me ok

May 23, 2009 | 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

Brake lights work intermittently


It sounds like a wiring fault - an earthing problem. Have a look around the lights/inside the lights themselves.. rear and front lights, brake lights, etc ...check the wires for corrosion/splitting. In particular check any black earth leads where they attach to an earthing point.

Mar 26, 2017 | 1997 Chevrolet Lumina

1 Answer

Rear brake light function not working


Hi
You may just have a bad earth in wiring on the lighting or your light control modual could be fuilty has any one tested this for you
Paul

Dec 31, 2008 | 1996 Lincoln Town Car

1 Answer

Stop lamp and cyclops light


If by the "cyclops light" you mean the third brake light, I went to auto zone and purchased 6 ea. part number 858352 instrument panel connectors and added number 194 bulbs to them. All you have to do is pull (gently) on the cover and it will come off. It snaps in place. Twist the bulbs 1/4 turn ccw to remove, insert new assembly and voila, you're in business. The other brake lights are behind the carpet in the trunk. Be sure to remove the correct bulb or you will replace the turn/marker lamp and still have a brake light out. Good Luck.

May 15, 2008 | 2000 Saturn Ls 4dr Sedan

Not finding what you are looking for?
2000 Dodge Grand Caravan Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...