Question about 2000 Ford F150 Flareside SuperCab

1 Answer

2000's F-150 5.4 L shakes during acceleration

One mourning my f-150 did not start until the fourth try, then while I was driving I felt it the shake a bit while I pressed the gas pedal. I also noticed a cliking noise at the same time I pressed the gas pedal. I changed the PCV valve and PCV L fitting but did not help much. check engine light also came on. what am I loking for? please help!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 585 Answers

Visit your local Auto-Zone or similar auto parts outlet, they should scan your system for you for free and tell you what the "check engine" code(s) indicate. I am suspecting it will report a "misfire" condition. That could be a result of a bad injector, spark plug or coil/wire problem. Sometimes the code(s) is/are specific as to which of those things is the problem.

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my car shaking


Short answer: If it quits shaking when you let off of the gas pedal, it is likely an engine misfire.

Long answer: I believe your model is new enough for the transmission to have a lock-up torque converter.
At around 40-45mph, the torque converter locks, making a solid connection between engine and transmission.
When this happens, any engine misfire is more readily felt throughout the car during acceleration.
The first items to check would be spark plugs, spark plug wires, and ignition coils. These are most likely to act up under load conditions such as acceleration.

On the other hand, if you let off of the gas pedal and the car still shakes, it is probably a tire or wheel problem.

Mar 15, 2014 | Cars & Trucks

1 Answer

My 2007 Toyota Sienna shakes


ignition fault check replace spark plugs leads test it then coil packs

Feb 11, 2013 | Cars & Trucks

1 Answer

I was told if my cadi shakes when I turn it on somtimes I felt it shake as o drive they told me irs rhe head gaskets I dont want to belive that I also had.a message that said theft sytem car may not...


A motor that shakes when you accelerate can usually be traced back to a bad motor mount. The shaking is the motor shifting around each time you step on the gas. This can also happen when you shift from Park to Drive. Any head gasket problem would have loss of coolant, white smoke, and overheating associated with it.

Jul 30, 2011 | 1997 Cadillac DeVille

1 Answer

VW shaking


sounds like the fuel pressure regulator but first try new fuel filter and maybe clean spark plugs and reset them

Sep 23, 2009 | 1995 Volkswagen Jetta

1 Answer

92 Dodge Grand Caravan - shakes!!!!!!


It sounds like you need a tune change at least the wires and plugs it also could be a worn or broke motor or tranny mount.

Apr 07, 2009 | 2004 Pontiac Montana

2 Answers

Engine shakes and can not accelerate as quick when starts


If the engine light is on, a code scanner needs to be connected to it to find out why the light is on. It could be one of the sensors causing it. Take to autozone or advanced auto if there is one near you, if not call a repair shop that can do it. Autozone and advanced don't charge. Takes about 30 seconds.

Mar 24, 2009 | 2004 Chevrolet Cavalier

3 Answers

1994 Nissan Altima shakes while idling


Broken or worn out engine mounts will cause allot of engine vibration in drive at idle, reverse also, change all 4 the mounts, not just the 2 broken ones. As far as slow acceleration no mounts will not cause that, Have you reached the 100,000 mile recommended tune up? have you ever replaced the fuel filter, this is required every 30,000, let me know.

Nov 26, 2008 | 1994 Nissan Altima

Not finding what you are looking for?
2000 Ford F150 Flareside SuperCab Logo

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...