Question about 1991 Nissan Sentra 2 Door
Room lamp fuse 10amp keeps blowing out when overhead light and ratio is turned on.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First off, nothing "blows" into the air filter. It would be getting sucked in from somewhere in your engine compartment. My guess would be leaking valve cover. Check around and feel for wet oil. That will also be a leak. Have you been going through more oil than usual? Check that also. Hope that helped.
Posted on Jan 04, 2009
Transmission shift indicator light on center console.
First make sure the fuse is good.
If the fuse is good then remove the screws holding the center console cover. You will need a long and short phillip screwdriver. Look for screws in the cup holder, under the handbrake handle and where the console runs under the dash. You may have to move seats forward/backward to reach the screws. When you attempt to raise the console cover you will notice you overlook a screws. Remove them also. You may be able to reach the bulb without removing the gear shift handle. DO NOT TOUCH any other electronics you see. The AIRBAG ACTUATOR is located here also. Replace bulb. Test before reassembly. Good Saturday morning project.
Posted on Mar 13, 2009
Tips for a great answer:
May 16, 2015 | 2006 Nissan Sentra
Dec 16, 2014 | 2005 Dodge Ram 1500
Nov 23, 2012 | Cars & Trucks
Mar 08, 2012 | Nissan Pathfinder Cars & Trucks
Oct 01, 2011 | 2002 Nissan Sentra
Feb 05, 2011 | 1997 Nissan Sentra
Nov 17, 2009 | 2001 Nissan Sentra
Aug 18, 2009 | 2005 Nissan Altima
Feb 15, 2009 | 1994 Nissan Sentra 4-Door
May 27, 2014 | 1991 Nissan Sentra 2 Door
105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: