Question about 2003 Ford Expedition

1 Answer

2000 expedition pedal adjustment is stuck. Any ideas?

When the brakes are applied it makes a strange noise?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 424 Answers

If the brake pedal makes a crunching noise,try flushing out the brake fluid. For some reason after flushing the noise goes away. I hope this helps,goodluck.

Posted on Aug 01, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Expedition 2000 my LED Brake Lights when i plug it up they come by they self

must have the wiring wrong. are these accessories ? the power wire has to go to they wire that is live ONLY when foot brake is applied,take the power reaeding from back of brake bulb so get some to press brake pedal for you, and the earth wire to body/chassis point

Apr 28, 2014 | 2000 Ford Expedition

1 Answer

When I apply brakes to stop at light or sign in my 2000 ford expedition back brakes lock up and wheels skid, truck will not drive forward until you shut truck off and wait a few minutes then put it in

Check the adjuster springs and the adjuster for the back breaks. If those are broke, weak, or missing they will need replaced. If it's 4-wheel disc it might be bad calipers or anti-lock brake controller.

Mar 25, 2014 | 2000 Ford Expedition

1 Answer

Metal on metal noise when driving. Sounds like brake noise when brake pads are in need of replacement. Sound goes away when the brake is applied. Car only has 20,000 miles on it (2006).

Hello tgiro7: My name is Roger and I will help with your question. The fact the noise goes away when stepping on the brake pedal says the problem most likely is in the brake area. The pads could be worn out even at 20,000 miles.If the noise sounds like it comes from the front remove the wheels and check the front pads. If the pads are bad most likely the rotors are also bad.Same would apply if the noise emits from the rear. When you have the wheels off check to make sure the calipers will slide in and out on the mount pins. Should they be stuck on binding the pads will wear excessively and prematurely fail. The calipers must move freely on the pins. If you drive with your left foot on the brake pedal? The amount of pressure required to apply the brakes and not stop the vehicle is 1 to 2 pounds of pressure. Wont turn on the brake lights but will put pressure on the calipers. This in turn will wear out the brake pads. Another thing to look at would be an out of adjustment brake switch. Reach down and grab hold of the brake pedal. Give a firm tug on the pedal. Should you feel the pedal give and hear a click or two the switch was set to deep and holding the brakes on.
Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Jun 16, 2011 | Chrysler Crossfire Cars & Trucks

1 Answer

How to adjust rear brakes shoes on toyota corrolla 1999

the shoes on drum brakes should auto adjust by backing up and applying pressure to the brake pedal (you may hear a clicking noise from the springs on the adjustment stars as they turn). If this does not work, the mechanism may be broken, aligned improperly or stuck by corrosion. Most drum brake assemblies have an access hole in the drum or backing plate to make manual adjustments, comment back to me if u have these access holes and I will walk you through the procedure...(check your shoe lining thickness as you may just need new brake shoes)

Oct 01, 2010 | 1999 Toyota Corolla

1 Answer

06 malibu makes a strange noise when i push on the brake. Then i try to put in reverse from park but it is stuck in park. I already put a brake sensor in. What else could it be?

Welcome to
check at top of brake pedal is the noise loader ?
try to lay back look yp into dash where the brake pedal is and see if there is any wires hanging down, Regards Lee Davidian

May 31, 2010 | 2006 Chevrolet Malibu

2 Answers

2000 ford expedition brake lights dont work sometimes , when you pump the brakes hard they come on

It sounds like you need to replace the Brake Switch which is located on your brake pedal and sends a signal when you apply the brakes to the brake lights.

May 28, 2010 | 2000 Ford Expedition

1 Answer

ABS light is on, brake pedal makes noise

sounds like the r/f wheel brg needs replacing when you are coming to a stop and you hear the pedal making noise does it pull slightley to the left this would conferm the r/f is the problem

Jan 02, 2010 | 2000 Oldsmobile Bravada

1 Answer

When I apply the brakes my pedal feels bubbley

your abs unit is on it's way out.  Also check the vacuum booster.

Mar 30, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

1999 ford expedition brake lights stuck on even when headlights are off.

Hi my name is Juan and lets try to solve this it looks like your brake switch got stock look under the brake pedal there is a switch that makes contact with the brake pedal every time you press on it to check and see if the switch is bad disconnect the plastic connector to it it has 2 wires if your lights go off then is time to replace this switch you can do this your self and save some money it just treads in just make sure to adjusted so it can turn your light on with small amount of pressure to the brake pedal

Mar 27, 2009 | 1999 Ford Expedition

1 Answer

Brake Light Problem on 2000 Ford Expedition

sounds to me that the sensor is out there should be a little sensor behind the brake pedal adjust it foward .

Mar 23, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
2003 Ford Expedition Logo

281 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers


Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides