Question about Mazda MX-3

1 Answer

Once warmed up ,it stalls out like gas or ign. keep giveing throtle and it picks back up. car will sit for hours idling with no problem. i have a 3120 innova obd2&1meter but cannot find an adaptor to hook up to car, can you help? thank you

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,418 Answers

As for the adaptor you need, you will have to find a Snap-on dealer or go to >http://www.iequus.com/news/news.php?id=22< and order one. Your problem can be a coolant sensor or coolant thermostat not opening up enough. Ok heres the bad news, could be  a blown head gasket, do you loose coolant? . 

Posted on Jul 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have1990 Chevy Astro van,it starts just fine,when it warms up,driving it or sitting still in drive or reverse, it stalls,I start it back up,in park or neutral,it stays idiling.Idles cold,stalls warm


Check the ECM grounds, they are under the passenger side kick panel. When the engine goes to warm status, the Oxygen sensors come on, If there is no ground on the ECM then it starts pulling ground voltage across the sensors and that causes big issues.

Apr 29, 2017 | Cars & Trucks

1 Answer

Starts right up but once it warms up it dies have messed with the air gas screws that's fine don't know what the problem is


My car runs good when it's cold but stalls once it warms up ...

www.badasscars.com/index.cfm/page/ptype...id.../prd289.htm
My car runs good when it's cold but stalls once it warms up? ... In this situation, you can usually re-start the engine once it has hada chance to cool back ... it'll fill-up and exits fuel right up and out the vent tube which dumps it down the middle of ...

Car starts and after warmed up.. it dies!! HELP! - Honda-Tech

honda-tech.com/...del.../car-starts-after-warmed-up-dies-help-2797652/
Jun 28, 2010 - Car starts and after warmed up.. it dies! ... but if i let it sits for awhile till the engine is cool down it starts right up but after its warmed up.. it dies.

Troubleshooting an Engine that Stalls at Idle When Warm ...

www.gearheaddiva.com/.../troubleshooting-an-engine-that-stalls-at-idle-...

Dec 21, 2015 | Cars & Trucks

2 Answers

In cold weather, my car is slow to start and has stalled a few times. What should I check?


You don't say what make of car but it's about the same for all. Your problem is the choke adjustment. The choke raises the idle when the car is cold and after warm up drops to normal. You are doing the chokes job when you hold the pedal down, once its warmed up the choke no longer functions till cold again. So check the choke and the high idle speed adjustment. Simple fix. Hope this helps mike

Nov 20, 2014 | 1997 Toyota Corolla

1 Answer

1986 Nissan King Cab pick up. Runs good when giving gas, but cuts off at an idol. Have replaced Altenator.


Based on the information provided, it sounds like a bad TPS (Throttle Position Sensor). The TPS controls your idling speed under all conditions. When a TPS goes bad, you will usually notice the vehicle will idle when the engine is cold but once warm or with the AC on, it will sputter or stall.

Jul 18, 2011 | 1986 Nissan King Cab

1 Answer

Pontiac G6 2005 - starts then stalls immediately


Chage the throtle possition senser.

Jul 03, 2009 | 2005 Pontiac G6

1 Answer

Have a 1985 mazda rx7 will not idle .. cold start ok when choke is on once warm stalls and will not idle


There is a throtle adjuster right behind the carb. You can adjust it with a screw driver. If you are not sure where it is, just have someone press to gas pedal and you will see it move. RPM's at idle should be around 1,000 when it is idle once it has warmed up. Once that car warms up the choke moves back in and the car is probably stalling because it is not running enough RPM's.

Jul 01, 2009 | 1985 Mazda RX-7

1 Answer

My 88 s10 cranks but unless i pump gas pedle it shuts off. changed fuel filter and throtle body sensor still wont idle .press gas pedle it stalls out must pump pedle to keep it running


what engine does it have? 2.8 ? if so replce pick up coil in distributor /4.3 and 2.5 will do this also it affects pulse to injectors and on time firing

Jun 30, 2009 | 1988 Chevrolet S-10

2 Answers

4 cyl Engine starts and idles ok...give it throttle and it dies


I need to get a clear mental picture of what exactly is happening.

With this said, you stated that the car "runs fine" until warmed up.

Q: When you start the car when cold it idles fine?
Q: If you allow the car to idle until "fully" warmed does the car stall?
Q: As the car begins to warm up, Does the RPM fluctuate abnormally?
Q: Does the car Only stall when you press on the gas pedal or does it stall just sitting and idling in addition to pressing the gas pedal?
Q: If you can drive it while cold does the car stall during acceleration when warm or only at Stop Signs / Lights?
Q: If you wait 20min or so, can you start the car again?
Q: How many miles are on the car?

Mar 27, 2009 | 1995 Toyota Camry

2 Answers

86 Ford F350 Cold Start Problem


Does it have a carburetor or is it fuel injected? In 1986 it could be either way. It sounds like a carburetor with a choke problem.

Mar 24, 2009 | 1986 Ford F 350

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...