Question about Plymouth Grand Voyager

1 Answer

1999 plymouth grand voyager how to replace a tension pully assembly

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

Either thru the passenger front fender well. ir from under neath.. sorry its been a while. don't forget to remove the belt first. then there is a nut on the back side of the tensioner you have to remove and it is off

Posted on Jul 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt keeps coming off pully


I would think that either your belt is worn and stretched out or that the tensioner is worn and needs replacing.

Sep 07, 2014 | 1998 Plymouth Grand Voyager

1 Answer

How do i rplace brake light on 1999 plymouth grand voyager


OPen the back hatch. there are 2 srews on the door jam at the assembly remove them and pull the assembly out. It has clips that also hold it in. just pull it at the top and bottom and it will come out. You'll see how to do the rest.

May 01, 2011 | 1999 Plymouth Grand Voyager

1 Answer

Replacing headlight assembly for 1999 plymouth grand voyager 3.3L


It's relatively simple. There are 4-10 millimeter bolts that hold it in. Two on the top that are visible as the tabs are exposed. There are also two behind the radiator support that are visible if you look straight down almost right below the two on top. If I've helped, please rate my assistance and leave a testimonial. Thanks for using Fixya.

Feb 20, 2011 | 1999 Plymouth Grand Voyager

1 Answer

Install ac belt--how to ajust tension pully


What engine?

It should have an automatic tensioner for the serpentine belt. If the tensioner does not automatically rotate and take up the slack in the belt than it is bad and needs to be replaced.

Sep 26, 2010 | 1999 Plymouth Voyager

1 Answer

When water hits belt - it throws it off!


check all the bearing in all of the acc. power steering pump water pump idler pully a/c compressor etc. if all good no nise and they spinn freely check the alinment of all the puilly mak so they all line on together. sometimes the power steering pully get worn inside the pump and allow it to move back and forth too much some play is normal. also the power steering pully trys to walk off the shaft and make the belt track off the other pullys .

Jul 01, 2010 | 1994 Plymouth Grand Voyager

1 Answer

How do I install 1999 Plymouth Grand Voyager headlamp assembly, both right and left side


open the bonnet and look down behind the headlamp, you should see some small type nuts, possibly about 6 that hold the unit in place, undo them, remove the multi wire plug from the unit and replace with the new headlamp assembly

Jun 26, 2010 | 1999 Plymouth Grand Voyager

2 Answers

Serpintine belt popped off on 1999 plymouth grand


look at the pic under the hood or in a book. for the route the belt travels.. if the tensioner has good spring in it and has good travel. Its ok...take the belt to a auto parts store. And have them look up the right belt and compare the 2 belts for the one might have streached.hope i helped you .

Aug 08, 2009 | 1999 Plymouth Grand Voyager

2 Answers

My Serpentine belt is squealing above idle


first thing you need to do is get a new belt that belt dressing just destroyed that belt that stuff is no good then get a new belt tensioner clean all the pullys with some brake clean then install the belt tensioner and belt if its still sqealing there maybe a pully making the noise to check that when you have the belt off spin them by hand and listen to them and feel for any play in the bearings

Jul 19, 2009 | 1999 Plymouth Voyager

1 Answer

Serpentine belt and tensioner replacement 1999 Plymouth Grand Voyager 3.3 liter V6 engine


try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Mar 20, 2009 | 1999 Plymouth Grand Voyager

2 Answers

Automatic belt tensionor


Same tensioner or a new one?

Jun 16, 2008 | 1999 Plymouth Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...