Question about 2002 Jaguar X-Type

1 Answer

Engine malfunction light came on as well as the cruise control unavailable indicator. Saw that others have the same problem so have to wonder if it is a manufacturer's defect as it appears that no one is able to figure it out.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Jaguar Expert
  • 489 Answers

You have to check the car via diagnose system , write the codes and then delete all and drive the car for about 15 minutes , then test again and check what are the codes that comes back on. This might be for many reasons as it is not a one problem issue .

Posted on Aug 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I troubleshoot the cruise control of a 2003 Alero?


It's probably a problem with cruise control module , located under the hood in engine compartment . Or a bad connection somewhere . Do you know how to do electrical testing ? Is the air bag light lit on the instrument cluster ?

Could have DTC'S - diagnostic trouble code's stored .
DTC P1554
The powertrain control module (PCM) inhibits cruise control operation when certain conditions are not appropriate for cruise control operation. The PCM removes the ground from the cruise control inhibit signal circuit in order to disengage cruise control operation.
DTC P1585
Output driver modules (ODMs) are used by the powertrain control module (PCM) in order to turn on many of the current driven devices that are needed to control various engine and transaxle functions. DTC P1558 set indicates that an improper voltage level has been detected on the signal circuit which controls the cruise control inhibit circuit.
Action Taken When the DTC Sets
• The PCM will not illuminate the malfunction indicator lamp (MIL).
• The PCM will store the conditions present when the DTC set as Failure Records data only.

Cruise control is a speed control system that maintains a desired vehicle speed under normal driving conditions. However, steep grades may cause variations in the selected speeds. The electronic cruise control system has the capability to CRUISE, COAST, RESUME SPEED, ACCELERATE, and TAP-UP or TAP-DOWN.
The main parts of the cruise control system are:
• The cruise control module assembly
• The function control switches
• The cruise control release switch
• The clutch pedal position switch (CPP), if equipped
• The stop lamp switch assembly
• The vehicle speed sensor
The cruise control system uses the cruise control module assembly to maintain the desired vehicle cruise speed and operation. The cruise control module assembly has an electronic controller and an electric stepper motor to vary the throttle in each different cruise control mode. The electric controller monitors vehicle speed and operates the electric stepper motor. The stepper motor operates in response to the electronic controller, to maintain the desired cruise speed. The electric stepper motor moves a strap that is attached to the cruise control cable which moves the throttle linkage. The cruise control module assembly contains a low speed limit which will prevent system engagement below a minimum speed of 40 km/h (25 mph). The module assembly is not serviceable.

Dec 11, 2016 | 2003 Oldsmobile Alero

1 Answer

My cruise control on my 2001 Kia Sportage stopped working.


Check your repair manual where the vacuum hoses for the cruise controls are (engine bay). Maybe one of the hoses came off or has a leak.

Feb 29, 2016 | 2001 Kia Sportage

1 Answer

My mercedes c300 2010 says cruise control inoperative & a lot of messages start to pop up what does this mean


Do you also have a Check Engine light? If so, have that serviced - a MIF (Malfunction Indicator Light) typically disables a lot of other things, related to the problem or not.

Jul 08, 2014 | Cars & Trucks

1 Answer

I have a 1998 gmc sierra 1500 z71 and the cruise control doesn't work at all. Is there any way I can fix it myself?


Actually FIXING the cruise control is usually not very hard. The hard part is finding out what is WRONG with the cruise control. Cruise control problems are usually caused by a broken clockspring (or contact assembly) in the steering column or a faulty cruise control servo assembly. Of course, there are several other possible reasons for the cruise to malfunction, but these are the most common.

The first step would be to scan your Engine Control Module (ECM) for fault codes. Please note that cruise control faults will not normally cause the Check Engine light to illuminate, so it is NOT safe to assume there are no codes present just because the light is not on. If the Check Engine light IS on, then you need to scan your ECM anyway! If there is a problem with the servo assembly, there will most likely be a code set. Problems with the clockspring will not usually set a code. A good clue that this could possibly be the problem is an inoperative horn and/or the Airbag warning light being on. (A broken clockspring will also cause these things)

Jun 12, 2011 | 1998 GMC Sierra

1 Answer

I have the EXACT problem joshvs described on jan 25,2010; Check engine light on, VDC disabled on, and cruise control on. There were no answers posted.


The "VDC Disabled" means that your Antilock brakes and traction control system has been disabled due to a malfunction, The Cruise Control light means that the Cruise control has been disabled due to a malfunction and the Check Engine light means that there is a malfunction in the engine management system. If all three lights came on at the same time, you most likely have a bad Vehicle or Wheel Speed sensor - this will affect all three. The only way to find out for sure if this is the cause, or to find out which speed sensor is at fault is to scan all your computer modules and retrieve the fault codes

Mar 26, 2011 | 2008 Subaru Impreza

1 Answer

The cruise control indicator light is flickering erratically however the engine performance doesn't seem to be affected in any running state: accerlating, decelerating, idling, driving steady speed, etc. ...


The cruise control indicator is an intregal part of the Instrument Panel Cluster module (IPC). The IPC gets a data signal from the Powertrain Control Module (PCM) commanding it to turn the indicator on or off depending on the switch input at the steering wheel. The indicator doesn't even show on the wiring diagrams for the cruise control. You have to go to the Instrument Cluster diagrams to even find the thing. Pushing the switch on the steering wheel momentarily grounds the circuit to pin 41 Connector C2 at the PCM. It actually has nothing to do with illuminating the indicator. (at least, not directly) If the cruise control is otherwise operatng properly, then it would be safe to assume that the control buttons and the PCM are not the cause. It would almost HAVE to be a malfunction in the IPC itself.

Dec 02, 2010 | 2000 Chrysler Grand Voyager

2 Answers

Fault code p1111+p1647 engin light is on


I have a 2002 X-type Jaguar and the check engine light and cruise control unavailable comes on but the cruise control light goes off once the car warms up. Any ideas?

Feb 14, 2010 | 2002 Jaguar X-Type

1 Answer

Check Engine Light, plus Cruise control indicator Light both on!!


cruise light automatically comes on when there is a malfunction that causes c.e.l to illuminate,this occurs because your accelerator is electronically controled

Aug 09, 2009 | 2005 Subaru Impreza

2 Answers

Cruise Control on 2 door Sport 4x4 with SOHC: Non-working cruise control. When turned on, cruise control does not engage, no dash light indication either.


look in your owner's manual for the location of the cruse control fuse it is different from other fuses usually much larger

May 21, 2009 | 1999 Ford Explorer

1 Answer

Electronic throttle control, cruise control


You need to have the codes read. The electronic throttle relies on an APP sensor and a TPS sensor. A problem with either one of these will cause this. Also, the cruise would be affected by this, as there is no cruise servo, it's controlled be the electronic throttle body.

Oct 12, 2008 | 2004 Dodge Ram

Not finding what you are looking for?
2002 Jaguar X-Type Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...