SOURCE: brake lights/rear turn signals
I had the same problem with my 1999 Yukon. The electric board needed to be replaced. Rust starts to build up and shorts out or blows the bulb. The dealership charged $73.60 for the part and I installed it myself (Saved $30).
SOURCE: Chevy Cavalier 2001 turn signal blinks fast
If new bulbs don't work, it is probably the harness that holds the bulb. I had to replace both on my car after fighting with the problem for over a year and not knowing.
SOURCE: left rear turn signal light on my 1999 chev. s10 is not working
any increase in bink speed is direcly related to a bulb being burt out.
SOURCE: Turn signal right side does not work on 2005
This happened to my car as well. I put the bulb in the other light and it worked find then I noticed that the socket was burned so I called about getting a replacement socket and was told that this was a common problem. I cut off the socket section from the part they sold me and spliced it on myself. Works fine now.
SOURCE: 2004 Dodge Durango: Left turn signal blinks fast
Check the bulb socket for a burnt or a shorted condition. Remove bulb and try another bulb, if it does it again then you have a short in the socket or wiring to bulb. Turn on the 4 way flashers and see what it will do. If it continues then look for any burnt wire connector or wireing to bulb. Check the wiring behind the light for any metal that has cut into the wiring insulation. Hope this will help you.
39 views
Usually answered in minutes!
×