Question about 1994 Toyota Pickup

1 Answer

No power at all

My 1986 toyota has no power at all, the battery is good and the terminals are clean. I checked all the fuses and thats all good as well

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 305 Answers

Have you checked the battery earth strip that goes from the battery to the bodywork,, sometimes a bad earth can give these symptoms.........the only other thing is possibly the main battery fuse...usually situated in a small black box near the battery

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Radio filter capacitor replacement in a 1994 Toyota camery


It seems that short circuit/Voltage drop has occurred during the replacement and cleaning the battery ends. Please check the following:
- Check the battery voltage.
- Power fuse if attached at the battery +ive terminal.
- Ignition (IGN) fuse in the fuse and relay box in the passenger compartment.
- Ignition switch.
If problem persists, contact a qualified service personnel.

Dec 18, 2014 | 1994 Toyota Camry

1 Answer

Drains battery while sitting


Here is how to detect a drain in system! Use a test light, Hook up test light to the negative terminal on battery. ( unhook terminal first.) connect opposite end of test light to negative on battery. If a drain, light will be on. Start pulling fuses from fuse box. when the test light goes out, that is the problem curcuit. let sit 3to5 minutes before pulling fuses. Good-Day!

Aug 07, 2014 | 1986 Ford Mustang

1 Answer

No Electrical Power


You'll need to use a test light or meter to follow the power from the battery to the main fuse box. Check the ground connections also.

Feb 20, 2014 | 1986 Toyota Land Cruiser

1 Answer

My mr2 86 doesn't crank


Make sure you have a good battery/connections. Make sure you have power down to the starter on the B+ terminal if not replace faulty wire or clean/dirty connectionson ensure connections are tight. While someone turns the key make sure you have power in the S terminal. If power make sure the engine isn't locked up and replace the starter. If no power you may have an issue with the ignition switch circuit (stitch, wiring, fuses....)

Mar 09, 2012 | 1986 Toyota MR2

1 Answer

We have a 86' 4runner. We have power to the starter but it will not turn crank and no power to any of the electrical


Check for any fusible links that might be blown, usually in the battery area or in a main fuse box under the hood near the battery, also check the positive battery terminal & cable, you might have more than one cable on the + terminal.

Mar 29, 2011 | 1986 Toyota 4Runner

2 Answers

I have a 1986 Chevy monte carlo ss i have headlights but nothing else when i turn the key nothing happens i have no door locks power windows turn signals or anything but head lights i keep getting told it...


There are several ways to add more ground wires. If your battery ground cable is clean and tight, you can use 10 or 12 gauge black automotive wire and terminal ends to make your own grounds. Ground from the negative battery terminal to the engine. Ground from the negative terminal to the metal firewall behind the engine. Ground from the negative terminal to the chassis.

Mar 11, 2011 | 1986 Chevrolet Monte Carlo

1 Answer

Ignition light does not come on


Hi,

You need to check the following. Do a load test for the battery. Check, clean power terminals, connectors. Clean fuse & fuse holder in starter relay and in fuse box. Clean ground connection points to batteries - terminal, engine and chassis/frame. Let us know if you were looking for something more else please accept the suggestion.
Thank You for contacting Fixya.com

Feb 07, 2010 | 1994 Toyota Celica

1 Answer

1986 Toyota Pickup Instrument lights and tail lights out


Even though the relay is activated,I assumed you checked the out put?Also,You checked the voltage at the light sockets?With a meter,or test light ,check the fuse for the cluster lps,adjust them to dim,and to bright,the meter should act accordingly on the fuse.If it does not,replace the dimmer control,or head light switch,witch ever controls them.This may allow continuity to the tail lights as well.If the fuse is dead for the cluster lights,replacing the dimmer control,or head light switch will solve the problem,or,from another fuse ,supply voltage to the cluster lp fuse,one that is only hot with the key on,cause if you do this the dash lights will come on,every time you run the vehicle,day,or night.

Dec 20, 2009 | 1986 Toyota Pickup 4WD

1 Answer

Changed starter but still clicking by the fuse box


Hi,
This sounds like a poor battery connection. Clean up the terminals and cable for a good metal to metal contact and see if that helps. Be sure to check your clamps to wire connection too.
I'm not familiar with your model, but if the battery idea doesn't pan out, check the connection at the solenoid.
Hope this helps... Good luck!

Oct 13, 2009 | 1986 Toyota Pickup 4WD

1 Answer

86 Tercel 2wd wagon won't charge it's battery


clean battery terminals ,bring battery to be tested after charging, after reinstalling battery run car and test alternator output it should be a minimum of 13-14volts if it is under 13 replace alternator , use a voltmeter set on 12 volt 10 amp dc to check the wire to check is located on the back of the alternator covered with a rubber grommet of course hold negative wirw on volt meter to ground and touch red wire to big terminal on back of alternator while car is running should have 14 volts or at least 13 volts

Jul 27, 2008 | 1986 Toyota Tercel

Not finding what you are looking for?
1994 Toyota Pickup Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...