SOURCE: need to replace cargo & third break light how do i
if its the same as an 06 Tundra, you should be able to remove the lense cover from the back of your truck cab with a screwdriver and pull the light bulbs out...Do not remove the screws below the lense cover that removes the fixture, they have a screw insert that will fall into your truck's body and get lost.....hehehehe I learned that from my own experience...good luck!
SOURCE: Where do you add transmission fluid to a 2004 toyota tundra auto
You add Transmission fluid through the dipstick tube, you will need a small funnel, you can buy one at a local auto parts store.
With the engine warm and the truck in park and running, pull out dipstick, wipe it clean, replace, then pull out and check level.
Let me know if you need further assistance.
Please rate this solution.
Lone99star
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee
SOURCE: Cannot start engine after alarm sounded.
disconect the battery for about 15 minutes and turn the head lights on after bat is disconected and then turn head lights off reconect bat and this should reset your alarm system.
SOURCE: 2006 V8 Toyota Tundra Faulty Alarm System
I am having the same problem. Where is the hood latch switch located? And what does it look like? Thanks!
59 views
Usually answered in minutes!
×