Question about 2004 Dodge Dakota

2 Answers

A/c/heater bower stopped working 2004 Dodge Dakota

It worked yesterday, fuses inside appear ok. In the power distribution center I can't tell if the 40amp HEVAC fuse is good or not..I've never seen these before. Could the problem possibly be the A/C relay? These seem to be the only related posistions on the diagram.

Also near the a/c unit there are 4 relays(I guess) but they aren't labeled. Any idea how I could find out which may feed the blower?

I do not have a voltmeter here to check them thought if they weren't too expensive I would try changing some first.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Check Your heater blower motor resisto located somewhere on the heater box.

Posted on Jul 27, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Its the blower motor resistor i had to replace mine with 25,000 miles

Posted on Aug 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Dodge Dakota 4x4 SLT Body Control Module location


I have a manual for a 2004 Dakota that is probably similar to the 2006 electrically. Dodge never called it a Body Control Module; earlier models did have the Central Timer Module (CTM) which functioned like Body Control Modules in other manufacturers vehicles.
In 2004, the CTM was replaced by the Integrated Power Module (IPM), which consists of the Front Control Module and Power Distribution Center, and is located next to the battery on the left inner fenderwell (the Front Control Module is underneath the Power Distribution Center, where you will find relays and fuses). There are several other modules which control various functions, and they communicate with each other through the Programmable Communication Interface (PCI) bus circuit, also called J1850.
The Front Control Module controls all exterior lights, except brake lights and turn signals, and the windshield wiper functions. Other modules (PCM, TCM, antilock brakes, heated seats, instrument cluster, power locks/power windows/power mirrors, etc) control other functions, but all communicate through the PCI bus.

Nov 08, 2016 | 2006 Dodge Dakota

1 Answer

Is there a fuse that controls both turn signals as well as radio on a 2001 Dodge Dakota?


Radio power is applied through 15A fuse F1 in the junction block; Turn signal power is applied through 30A fuse F1 in the power distribution center.

Aug 01, 2016 | 2001 Dodge Dakota

2 Answers

WHERE TO LOCATE A FUEL RELAY ON A 1995 DODGE DAKOTA


Inside the engine compartment should be a black fuse box with the location of everything inside the lid.

Feb 22, 2011 | 1995 Dodge Dakota

1 Answer

Ran ok till i changed distributor,cap,crank sensor now it will not start codes up as safty shutdown,fuel pump relay circuit and ignition/distributer engine speed input circuit can anyone tell me whats the...


It is the Auto Shutdown Relay located in the power distribution center under the hood, the black box with all the fuses and relays. Replace the relay, and check all the 30amp and 50 amp fuses. You might try removing the relay and reinstalling it first, to see if it will reset.

Feb 22, 2011 | 1999 Dodge Dakota

1 Answer

Need fuse panel diagram for 1996 dodge dakota


Its a video, of the fuse panel and power distribution center.... http://www.youtube.com/watch?v=GrICzNVJAW4

May 17, 2010 | 1996 Dodge Dakota

1 Answer

I own a 2004 dodge dakota and I think the fusible Link went bad at least that is the advice that everyone has given me. I have the fuse, just can't find it. Book says it is in the Power Distribution...


Best chance is to go to a Mopar store and check with a clerk to help you find the fuse box (and more then likely it is under the hood close to the battery ) a box with a lot of cables connected to it in side this box you will find the main fuses for ECU (Electronics ,Control , Unit)

Apr 01, 2010 | 2004 Dodge Dakota

2 Answers

Heater/Defroster 2004 Dakota


replace the resistor that should fix it

Oct 27, 2008 | 2004 Dodge Dakota

Not finding what you are looking for?
2004 Dodge Dakota Logo

768 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...