Question about 2006 GMC Sierra

2 Answers

O6 GMC SIERRA FUSE BOX

THE 15 AMP FUSE KEEPS BLOWING OUT WHEN I STEP ON THE BRAKE PED. PUT NEW LIGHT BULBS AND NEW FUSES TO ALL HAVING TO DO WITH BRAKES EVEN UNDER THE HOOD...

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Check trailer wiring, That's a good place to start.

Posted on Jul 27, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 305 Answers

Check at the top of the pedal, there is a micro switch that operates when you depress the pedal, this in turn operates the electric feed to the brake lights, this switch may be worn, or faulty...an easy but a little awkward fix

Posted on Jul 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the tail light fuse?


The tail light fuse is under the rear seat on the drivers side.

Jan 17, 2016 | 2003 GMC Envoy

1 Answer

Service 4 wheel drive message comes on and no lights for 2and 4 wheel drive come on. On my 2004 gmc


Often lights under a dash or indicators just blow out bulbs. If more than one thing isn't lighting and are centralized check fuses to see if its blown. Bulb or fuse. IMHO. MIGHT be a sensor on tranny too. Hope not.

Here's a video with detaile dinstrauctions and other people's fuse questions. New fuses?

Kind Regards,
Scott

Interior Fuse Box Location 1999 2007 GMC Sierra 2500 HD 2004 GMC Sierra...

Amazon com Fuses Fuses Accessories Automotive

2004 GMC Sierra fuse box Questions

Kind Regards,

Scott

Feb 11, 2015 | 2004 GMC Sierra

1 Answer

My brake light 15 amp fuse keeps blowing


Check the wiring for a short to the brake lights and check the bulbs have good filaments and are the right bulbs.

Aug 03, 2014 | 1997 Honda Civic

1 Answer

Why do Brake lights fuses keeps blowing


Because you have yet to get yourself a wiring
diagram & do the required testing to find a problem

You find a problem first--you have a symptom only

Why would you replace a fuse more than once?

Like watching them go up in smoke & cost you money

Jul 21, 2014 | 2006 Mazda Tribute

1 Answer

Brake light fuses keep blowing


On some models the light switch it defective increasing the volts in the tail and brake circuit.

Dec 02, 2013 | Mitsubishi Galant Cars & Trucks

1 Answer

Tail lights wont come on keeps blowing fuse blows 10 amp 15 amp and even 5 amp fuses


put a 12 volt light bulb in place of the fuse. It will stay lit until you find the short circuit. Check tail and park light & side marker bulbs first.

How about if you just turn parking lights on, not headligths

Oct 11, 2011 | 2001 Ford Focus

2 Answers

I have a 1996 Suburban that keeps blowing fuses on break lights


Check the turn signal flasher,and the trailer wire adapter that plugs in under the rear of the truck.Check the brake light switch,to see if it is grounding out on something.

Jan 03, 2010 | 1996 GMC Suburban

1 Answer

I have a short to ground problem with my tail/crtsy light circuit ( keeps poppin fuses when the light swith is pulled to on position) also dash lights & tail lights don't work but interior light is on...


Try removing the bulbs from the rear tail lights you have one 2 bulb system shorting out, so one at a time remove the bulbs then replace the fuse and see which one is bad or just buy new bulbs and replace, also could be front running light blinker light. But sounds like brake light to ground threw bulb.

Jun 13, 2009 | 1985 GMC S-15

1 Answer

Brake lights quit working.


if all fuses and bulbs are ok get to the brake switch and see ifits stiff or stuck, if it just has two wires on it you could join themtogether to see if the brake lights come on though obviuosly dont leave them joined.Good luck davelee

Mar 23, 2009 | 1998 GMC Sierra

2 Answers

1998 GMC Sierra Signal Fuse Blowing


it seems you have a short in either one of the lights or interlock. all are connected to the same fuse. trace the wiring from the fuse box back to the component. Using a test light test in between the wires. check for any obvious breaks in the wiring.

Dec 06, 2008 | 1991 GMC Sierra

Not finding what you are looking for?
2006 GMC Sierra Logo

701 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...