Question about Cars & Trucks

Open Question

I need to find the location of the remote keyless entry/TPMS remote sensor and possibly the replacement part number.

2006 CTS Sport Luxury 3.6 V6

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 1999 Honda Civic Remote Keyless Entry System

Hey .. i have a 99 civic also and i found my door doesnt lock unless u open the handel and then lock it and was talking to the shop and they told me things get gumed up inside and take it apart and clean it up with lub .. try that see if it works sounds like same problem

Posted on Oct 08, 2008

  • 1 Answer

SOURCE: keyless entry remote

Check inside the remote case...there's instructions printed that tell you to hold the lock and unlock buttons for 7 seconds to reset the remote. I'm in the middle of replacing batteries myself. Let me know if it works.

Posted on Nov 07, 2008

  • 1 Answer

SOURCE: I PURCHASED THIS 2004 AVIATOR USED WITH NO KEYLESS ENTRY CODE.

the keyless code is by the right rear door panel. open the door, remove the panel that's over the the seatbelt. after doing that open but you don't have just kind of stretch out and their you will find a black box or reciever with a sticker and a 5 digit code stamped on it. if you want to change the passcode refer to your manual, but you'll need the original code to be able to change it.

Posted on Nov 13, 2008

chuck943
  • 783 Answers

SOURCE: CHANGE CODE ON KEYLESS ENTRY SYSTEM FORD EDGE

Yes you can program your own code by inputting the original code then hit the no. 2 button then input your own 5 digit code.

Posted on Mar 16, 2009

  • 6 Answers

SOURCE: VW Jetta keyless entry remote not working

newer remotes just pull apart, no screws

first detached the half with the pivoting key
just pull that half away from the other half

on the half without the key attach
it splits apart to expose the battery (usually a 2032 watch battery)
you may need a small flat head screw driver to help to split it apart

Posted on Jul 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the pcv valve located?


there is no PCV valve. Its replaced by some sort of metering tubes.

Apr 14, 2016 | 2006 Cadillac CTS 3.6

1 Answer

How many wire harness clips connect to rcdlr module on 2007 impala besides the antenna


2007 Chevy Impala Keyless Entry: Keyless Entry Only ...

www.2carpros.com/questions/2007-chevrolet-impala-chevy-keyless-entry
Dec 30, 2010 - CHEVY KEYLESS ENTRY ... 2006-2007 Chevrolet Impala, Monte Carlo ... Remove the clips holding the RCDLR antenna wire at the RCDLR module and along the "A" pillar. 5. ... Connect the new antenna to the RCDLR antenna module. 11.... The existing antenna is grounded into another wiring harness.

TPMS and key FOB range problems - LS1TECH

ls1tech.com/forums/ls4.../719926-tpms-key-fob-range-problems.html
May 24, 2007 - 2006-2007 Chevrolet Impala, Monte Carlo ... Remove the clips holding the RCDLR antenna wire at the RCDLR module and along the "A" pillar.

Buick Workshop Manuals > Lucerne V6-3.8L (2007 ...


Dec 01, 2015 | 2007 Chevrolet Impala

1 Answer

Keyless remote wont work


Many times if you purchase a used vehicle, the car lot only provides the key because they do not want to spend the money to purchase a key fob. A 2006 Lancer either has a 2 or 3 button keyless entry remote which you can find here: http://replacemyremote.com/
Keyless Entry Remote Fob Replacement

Feb 08, 2014 | Mitsubishi Cars & Trucks

1 Answer

Keyless entry does not work


I would suspect the remote is defective.

Jun 15, 2012 | 2000 Mitsubishi Montero Sport

1 Answer

I need instructions to program keyless entry remote for 2002 Hundai Santa Fe


For a 1994 to 2006 Sonata, a 2001 to 2006 Elantra, a 2000 to 2006 XG350 or a 2001 to 2006 Santa Fe, you will need to access alarm system control module. On most of those vehicles it is located on the driver's side fascia panel. But on the Sonata, the facia panel is in the center.

  • 2 Once you have found this module, you will want to ensure that the memory switch is in the OFF position. Then turn the ignition on.
  • 3 Wait 5 seconds and set the memory switch to SET position and then press the remote transmitter lock button to send the code to the alarm system control module.
  • 4 If you would like to program a second remote transmitter then you will need to press second remote transmitter lock button.
  • 5 Next set the memory switch to off, then turn the ignition off. You can confirm your programming by locking and unlocking the vehicle with both of the remotes. good luck my friend
  • Feb 08, 2012 | Hyundai Cars & Trucks

    1 Answer

    I have a 96 ford conversion van with a 600 plus addon keyless system and need to program new keyless remots , need to know how to get system in program mode.


    Hi.

    To program ( or reprogram ) a keyless entry remote transmitter into the remote keyless entry module, perform the following steps:

    1. Turn the key to ON or ACC and short the two terminals of the program connector, a two-pin connector located below the driver's side of the instrument panel at the base of the steering column. All doors should lock and then unlock.
    2. Press any button on each keyless entry remote transmitter in turn. All doors should lock and then unlock. If the door locks do not respond, press the button again (up to three times maximum with the same keyless entry remote transmitter). If the door locks still fail to respond, go to Pinpoint Test A.
    3. Repeat Step 2 to program additional keyless entry remote transmitters into the remote keyless entry module (up to four keyless entry remote transmitters maximum).
    4. Turn key off.
    5. Remove the short from the program connector. All doors should lock and then unlock.
    6. Verify that the keyless entry remote transmitters have been successfully programmed by pressing the LOCK or UNLOCK button on each one, and observing that the system responds by locking and/or unlocking the doors.


    I hope this helps you.

    Thanks!

    Nov 28, 2010 | 1996 Ford Econoline

    1 Answer

    2006 cadillac CTS 2.8 v6. Two side brake lights went out


    im replacing the BPP sensor on one now, Brake Pedal Position sensor

    Jul 14, 2010 | 2006 Cadillac CTS

    1 Answer

    Engine coolant temperature sensor


    it is on the left side cylinder head...about mid way...between number 2 and number 4 Ignition coils...but lower...below but not under valve cover.

    Jul 10, 2010 | 2006 Cadillac CTS

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    14 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75005 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...