Question about Cars & Trucks

Open Question

I ment horn not hon am 67 know nothing of electrics on scooter and dont understand thease computer things t u

Every thing else works ok

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 192 Answers

SOURCE: all electrical went out

Use a wire brush to clean the battery terminals and the inside of the battery cables where they connect to the battery terminals. If that doesn't fix it, I suspect the problem is the negative connection from your battery to the car body/engine block. Follow the thick cable from the negative terminal of the battery to where it connects to engine block. Make sure you have a good clean metal to metal contact. Use an ohm meter to check to make sure this cable and connection is good. If the connection to the engine block is bad the hood light might still be able to work if it has a separate connection to the negative battery terminal.

Posted on May 21, 2009

  • 100 Answers

SOURCE: horn blows fuses

Don't bypass the fuse, you'v either got a short in the horn or the wrong fuse
it takes a 20 amp and I highly ecommend using a plug in breakr instead of a fuse

Put in a breaker, if it trips unplug the horn and try again, if the breaker trips again, there's a pinched wire, if it does NOT trip replace the horn itself

Posted on Sep 13, 2009

  • 32 Answers

SOURCE: horn dosent work, dont know if iam missing

take a test light and hocke it up in wire for horn under car ground test light.have someone push horn if it does not light work your way back fuse horn button etc it allso a horn realy

Posted on Mar 28, 2010

  • 5 Answers

SOURCE: Almost all electricts went off

ground wire.

Posted on May 23, 2010

  • 24 Answers

SOURCE: horn doesn't work ,how do I test it to find the problem

an easy way is to switch relay with one that you know is good. aslong as the numbers are the same it can be switched. most all the relays in your dodge ram are the same.

Posted on Aug 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to fix Cruise Control


The most common problem on this vehicle is the sensor right on the master brake cylinder the seal goes out and brake fluid gets right in the sensor ruining it that is the most common problem lete no if it helps

Sep 22, 2014 | 2001 Ford Windstar

1 Answer

Disable reverse beep on pride mobility scooter


I cut reversing feed wire to the beeper while still maintaining the horn beep. You have to know what you are doing though as on scooters they switch the earth/neutral rather than the live as in mains electrics.
There is a better way though. I believe a scooter shop can disable the reversing beep via the scooters drive computer. They just plug their laptop in and do some jiggery pokery.

Dec 09, 2013 | Cars & Trucks

1 Answer

My 1994 ford f150 truck horn doesn't work ,I needto know how to fix it and what to do to rule out things ?


Find horn under hood,than unplug the wire on it ,take a long enough wire to reach battery and horn touch wire on horn where the plug gos in and the other end of wire on battery,if the horn dont sound than its the horn, go to harborfreight or parts store and buy a new one, ifr the horn does sound than take off panel on steering wheel,3 screws behid wheel and look for wire to be pluged in and check the grounding wire.

Feb 25, 2013 | Cars & Trucks

1 Answer

No sound from hon but relay clicks


Check the voltage at the out side of the relay and the wire from there to the horn. Likewise the voltage at the horn. If all this is OK then horn is faulty.

Sep 01, 2011 | 2004 Ford F150

1 Answer

I have an 04 dodge ram that when i start it up none of the gauges work, check engine light comes own as well as the abs, service four wheel drive, an e brake light, also the wind shield wipers dont work,...


You could have some major electrical problems or it could be some thing simple. You need to have the codes read and repost. then we can help you. Getting the codes is the most important thing that you can do to let us know where to start.

Feb 07, 2011 | 2004 Dodge Ram 1500

1 Answer

Horn stopped working, radio stopped working, interior light won't come on, changed fuses still nothing


all of these things probably run off the same fuse if all of the fuses are OK the next thing to check is the wiring,there may be a loose wire or connection I dont know what fuses you have checked the main fuse box is under the hood but you may find one under the dash as well sometimes a fuse looks OK but it has a break in it that is hard to see if you have a continuity tester use that to check, it may be the accessories fuse that you need to check......hope this helps.....cheers

Jul 27, 2010 | 1989 Oldsmobile Cutlass Ciera

1 Answer

2004 F-53 motor home chassis with speedometer lagging about 20mph


I know electrical problems are probably the most frustrating things to go wrong. First I would like you to get your alternator and auxillary power generator checked. Autozone and similar can scan it. My alternator had us doing 55mph at a stop and running up miles too!

The generator can put out "dirty" power that is incompatible with delicate electronics.

There may be a speed sensor in the differential. I know some have them there. If not, I am sorry to say your computer may be bad. There are aftermarket devices for adjusting the speedometer for different size wheels and tires. This is done with computer reprogramming. Your vehicle should not have lost its settings on its own. If something is interferring with the readings it is possible to remove that device and your computer may recover.

Your leveler alert horn may be out of adjustment. Test the leads of horn before scrapping it. It may still honk.

If you recently plugged into a trailer park before this came about, you should have some warning panel to test crossed wires. If this is electrical damage due to casualty you may have homeowners coverage. Good Luck

Jul 31, 2009 | 2004 Ford Super Duty F 450

1 Answer

Horn doesn't work ,how do I test it to find the problem


an easy way is to switch relay with one that you know is good. aslong as the numbers are the same it can be switched. most all the relays in your dodge ram are the same.

May 28, 2009 | 1995 Dodge Ram

1 Answer

Car Horn


Try using a 12volt jumper wire directly to the horn from the car battery. also check the ground on the horn. The last thing I would do is pull the steering wheel cover. Make sure the horn is blowing first.

Aug 31, 2008 | 2002 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...