Question about Cars & Trucks

Open Question

2006, 6 speed S - Stopped at a light, hit the break and the clutch a bit late. Chattered almost stalled the car. Back in first gear, As I started to move had little to no peddle/throttle respons...

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 474 Answers

SOURCE: i have a 1999 Beetle with 1.8 turbo, when stopped

Change the fuel filter, that should fixya.

Posted on Feb 24, 2011

  • 4 Answers

SOURCE: 1988 Nissan 300zx 5 speed clutch peddle does not

Sounds like you have a leak in your clutch master or slave cylinder. I had the same problem. They are not too expensive at kragen or auto zone. The master cylinder is located on the right side of your engine closest to the driver. Open the cap and check if theres fluid. If its low or empty then there might be a leak. The slave cylinder is located on the passenger side under the car bolted to the transmission. That could be leaking or not working properly. I would replace both if you can. Hope this helps.

Posted on Jan 12, 2012

airjer995
  • 5332 Answers

SOURCE: abs and traction light comes on in my 2001 grand am when I hit a bump

Scan the abs module for codes. It is likely there is an issue with either a speed sensor or a wiring harness to one FI the wheels. The codes should help identify which wheel is having the problem. You can then focus your attention to inpsecting the components on that wheel. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Posted on Mar 14, 2012

happy_flyer
  • 3 Answers

SOURCE: cant put clutch int gear 2005 saturn vue

PLEASE SIGN ME UP ON U TUBE

Posted on Nov 06, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No reverse in my 2006 Hyundai Tiburon hatchback 5 speed what could be problem


"Car won't go in reverse" - New Tiburon Forum : Hyundai Tiburon ...

www.newtiburon.com/forums/.../189049-car-won-t-go-reverse.html

Aug 8, 2010 - 23 posts - ‎16 authors
Okay guys I just sold my 03 tiburon GT 6 speed to a 16 year old. I just got a ... Join Date: Sep 2006. Location: ... "It stalls and just drift forward, no reverse lights" Now did he break somethng or is he putting it in 6th..... Any Ideas. ... To view links or images in signatures your post count must be 5 or greater. Location of reverse light switch? - New Tiburon Forum ...
8 posts
Jul 23, 2014
So who's reverse lights don't work? - New Tiburon ...
25 posts
Apr 11, 2009
More results from www.newtiburon.com
Missing: hatchback

2003 Hyundai Tiburon Manual Transmission Complaints

www.aboutautomobile.com/.../Hyundai/Tiburon/Manual+Transmission
My 2003 hyundai tiburon clutch and flywheel broke on 3 separate occasions since ...into reverse, I had a hard time finding it, it would not let me put it into reverse and I ....2006; Description of the Complaint: I have 2003 v6 tiburon, clutch failed at ... bought 2004 5 speed tiburon (she bought it before my problems started) and ...

Transmission Won't Shift/CEL Due to Failed Speed Sensors ...

repairpal.com > Problems > Hyundai > Sonata

Jan 03, 2016 | Hyundai Cars & Trucks

1 Answer

How long does a clutch last


hi, i take it your vehicle is a manual or stick shift, to check your clutch you use 4th gear and with the engine running drop the clutch to see if it either stalls out the engine or slips. if your clutch cable is broken you will need to repair that first. with engine off engage first gear and attempt to start it, make sure there are no children or animals close to the vehicle, if the clutch is ok with your pedal pushed down the car will start, otherwise it will crawl at a very slow speed, needing repair.

Jun 20, 2014 | Suzuki Swift Cars & Trucks

1 Answer

Was running/moving on interstate, got off ramp, stopped at light, would start back, go into gears, but wont move..(manual )


Has your clutch been slipping a lot lately? All I could think of, maybe the clutch disc has worn off its friction surface, or the clutch pressure plate has failed. This would mean a new clutch is in order. If not the clutch, possibly an internal transmission failure.

Dec 29, 2012 | Cars & Trucks

1 Answer

2006 S4 Clutch or Slave Cylinder?


ok replace the slave cylinder and bleed it

Jul 13, 2012 | 2006 Audi S4

2 Answers

2006 4cyl manual 5 speed transmission 30K miles, light use with no problems. Will not go into any gear with engine running, goes smoothly into every gear with engine stopped. Clutch pedal feels fine and...


Well, there is only one thing I can think of in your situation. Your pressure plates just simply are not creating enough pressure to allow the gears to engage. Either you have a defective clutch and it needs to be replaced, or possibly just needs a ton of adjustment. When you put it in 1st gear while engine is off, then start it and take off that works b/c there is enough pressure to keep the gears from starting to move when not already moving. However when they are already moving, there is just not enough pressure to stop them from turning, not even long enough to shift. Have you tried forcing it into 2,3, or 4 while driving without the clutch? As long as you achieve the correct RPM's your transmission should be able to do so.

Feb 13, 2010 | 2006 Toyota Tacoma

1 Answer

Won't go into gear. Like it's stuck in neutral .Started off as difficult to shift when stopped about 20 min. later lost all gears while shifting from 2nd to 3rd.


Sounds like a clutch-related problem. To see if it is, firstly get the car in an area where it could move forwards or backwards a bit without hitting anything. I'm going to assume now that you can select all the gears just like normal when the engine is off. If you can't, then the problem is with the gearbox linkage or the gearbox itself. Then, with the engine stopped, select 1st gear and put your foot on the clutch and then start the engine. If the car attempts to drive off or the starter motor is driving the car, then the clutch cable requires checking or adjusting, or your clutch has worn out. A worn clutch won't allow you to change gears with the engine running. You may be able to tighten the clutch cable a bit to get a temporary fix, but think about replacing the clutch now.

Dec 31, 2009 | 1991 Suzuki Swift

2 Answers

I have a 2003 Lincoln LS V8. shifting shuttering


IS IT MORE BETWEEN 20-50MPH..IF SO THEN THERE IS 3 TSB FOR REPROGRAMMING THE PCM. LET ME KNOW IF ANY OF THIS WILL HELP
BATSAUTOREPAIR@GMAIL.COM

Nov 14, 2009 | 2002 Lincoln LS

2 Answers

I drive a 92 mazda mx-3. not sure if this is part of the problem or not, when my A/C is on my car will stall when stopped but i'm in hawaii so no real need for that. but when i press in my clutch i loose...


Check for vacuum leaks, cracked or broken hoses. Clean the throttle body and idle control ports with oxygen sensor safe carb cleaner. Last of all and most important is to get the idle control valve motor tested, it may not be responding quick enough to the sudden change in engine speed to keep it idleing. Also popping the clutch while in your highest gear will not damage anything, at least it never did for me. Don't do it in the lower gears at high speed, it will over rev the engine and that will cause engine damage.

Jun 30, 2009 | Mazda MX-3 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...