Question about Toyota Corolla

Open Question

Hell o where can I find torque specs for 1998 Toyota Corolla front tierods and macpherson struts please

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: torquing head

The 98 Corolla has a "torque-to-distance" spec.

First, torque all 10 bolts to 36 ft lbs (49 NM or 500kgf-cm), in a clockwise fashion, starting with the 2 center bolts.

Second, mark the bolts with a paint mark, and then torque each of the 10 bolts an additional 90 degrees.

Hope this helps, and thanks for choosing FixYa.

Posted on Nov 15, 2008

Testimonial: "thanxx very much "

  • 104 Answers

SOURCE: torque for head bolts for 1984 Toyota Corolla

head bolt toque specs are 40-47 ft-lbs

Posted on Apr 17, 2009

terseo
  • 92 Answers

SOURCE: torque specs for 1998 tercel 1.5L

Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.

Hope this helps

Posted on Sep 20, 2009

SOURCE: when do i need to change my 2004 Toyota matrix XR

There isn't really a replacement interval for struts however if you notice that the ride is a lot more bouncy then it used to be or notice oil leaking from them it's time to replace. For a quick crude but effective test, using the palm of your hands push down on a corner of the vehicle a few times to get it bouncing up and down. If once you release it it continues to bounce for more then 2 or 3 times it might be time to replace the struts.

Posted on Sep 27, 2009

Testimonial: "Thanks!"

co7196
  • 3433 Answers

SOURCE: does macpherson strut rotate when the front wheels are turned?

Welllllll, yes. om the parts and I never gave the rotate any thought I would think not. No on the rotate come to pondering on it.

Posted on Oct 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque specs on struts for a 1990 old's cutless supreme


https://s12.postimg.org/troce06kd/front_macpherson_strut.jpg

Click on the link.
This is for your vehicle, front macpherson strut.
The specs should be in the text.

Jul 21, 2017 | Cars & Trucks

1 Answer

Shocks


1992 Toyota Celica is not equipped with front "shocks". This vehicle is equipped with front wheel drive and independent MacPherson strut front suspension. Any repairs made to this system requires the removal of the entire strut assembly, which includes the strut, the coil spring and upper strut bearing assembly.

Replacement of any of the parts of the strut assembly requires the use of specialized equipment designed to compress and hold the coil spring to relieve the tension on the strut and upper bearing assembly.



12_4_2011_9_36_51_pm.gif
Any attempt to disassemble the strut assembly without the proper equipment for compressing and securely holding the coil spring can result in SERIOUS INJURY or DEATH.

Nov 30, 2011 | 1992 Toyota Celica

1 Answer

We are in the process of putting in the a new clutch kit on our 1999 toyota corolla 5 sp and we need to know what the torque specs are for the clutch bolts, can you help


Clutch disc and pressure plate. The bolts should be tightened in 2 or 3 steps, gradually and evenly. Final bolt torque is 14 ft. lbs. (19 Nm).

Nov 03, 2010 | 1998 Toyota Corolla

1 Answer

I am replacing the rear struts on my 98 toyota xls


upper nuts 36 lbs and the bottom two big ones are 145 lbs and the upper mount to body are 29 lbs. good luck man

Oct 18, 2009 | 1998 Toyota Avalon

1 Answer

When do i need to change my 2004 Toyota matrix XR struts? these are the specs on the front and rear struts MacPherson Strut Torsion Beam (Double Wishbone-4WD)


There isn't really a replacement interval for struts however if you notice that the ride is a lot more bouncy then it used to be or notice oil leaking from them it's time to replace. For a quick crude but effective test, using the palm of your hands push down on a corner of the vehicle a few times to get it bouncing up and down. If once you release it it continues to bounce for more then 2 or 3 times it might be time to replace the struts.

Sep 23, 2009 | 2004 Toyota Matrix

1 Answer

What do i need to install easily?


pb blast and a coil spring compressor. *you can rent this from auto zone or advanced auto

May 28, 2009 | 2006 Toyota Corolla

2 Answers

Torque for head bolts for 1984 Toyota Corolla


head bolt toque specs are 40-47 ft-lbs

Mar 22, 2009 | 1984 Toyota Corolla

1 Answer

Torquing head


The 98 Corolla has a "torque-to-distance" spec.

First, torque all 10 bolts to 36 ft lbs (49 NM or 500kgf-cm), in a clockwise fashion, starting with the 2 center bolts.

Second, mark the bolts with a paint mark, and then torque each of the 10 bolts an additional 90 degrees.

Hope this helps, and thanks for choosing FixYa.

Nov 15, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...