Question about Ford Ranger

1 Answer

2002 ford ranger turn signals not working. changed switch. flashers

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 12,123 Answers

Symptom Chart
Symptom Chart Condition Possible Sources Action

  • The turn signal lamps are never on
  • Central junction box (CJB) fuse 10 (7.5A).
  • Circuitry.
  • Multifunction switch.
  • Indicator flasher.
  • GO to Pinpoint Test H .

Posted on Aug 13, 2017

  • Jeff Armer Aug 13, 2017

    PINPOINT TEST H: THE TURN SIGNAL LAMPS ARE NEVER ON
    CONDITIONS DETAILS/RESULTS/ACTIONS
    H1 CHECK THE VOLTAGE TO THE INDICATOR FLASHER


    Indicator Flasher C2047




    Measure the voltage between the indicator flasher C2047 pin 30, circuit 8 (OG/YE), harness side and ground.


    Is the voltage greater than 10 volts?
    Yes
    GO to H2 .

    No
    REPAIR the circuit. TEST the system for normal operation.
    H2 CHECK CIRCUIT 44 (LB) FOR SHORT AND AN OPEN




    Multifunction Switch C202a


    Measure the resistance between the multifunction switch C202a pin 1, circuit 44 (LB), harness side and the indicator flasher C2047 pin 87, circuit 44 (LB), harness side; and between the multifunction switch C202a pin 1, circuit 44 (LB), harness side and ground.


    Is the resistance less than 5 ohms between the multifunction switch and the indicator flasher, and greater than 10,000 ohms between the multifunction switch and ground?
    Yes
    GO to H3 .

    No
    REPAIR the circuit. TEST the system for normal operation.
    H3 CHECK THE MULTIFUNCTION SWITCH CONTINUITY
    Place the multifunction switch in the left turn position.

    Measure the resistance between the multifunction switch terminal 8 and terminal 1 (component side).


    Is the resistance less than 5 ohms?
    Yes
    INSTALL a new indicator flasher. TEST the system for normal operation.

    No
    INSTALL a new multifunction switch. REFER to Section 211-05 . TEST the system for normal

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: turn signals

replaced turn signal flashers and muti switch turn signal still won't work Why?

Posted on Nov 11, 2008

LiveFreeNH
  • 11 Answers

SOURCE: 96 ford tarus turn signal

The turn signals and the emergency flasher are controled by a single electronic flasher unit. It looks like an electronic relay and is located on the far left underside of the dash. It is on a mounting bracket and has a three wire connector. If you do not hear this clicking when you use the turn signals or the emergency flasher it may be bad. Just remove the connector and remove the one screw holding the flasher to the bracket. Be sure the replacement is identical to the old one and compare them before installing the new one.

You may want to also check the turn signal bulbs also. Other causes would be bad signal and flasher switches, bad bulb connectors, and opens or shorts in the wiring.

Posted on Nov 20, 2008

  • 3 Answers

SOURCE: 1998 Ford Ranger XLT turn signals, hazzard flasher not working

wire plugin on back of turnsignal switch not making a connecting

Posted on Jan 15, 2009

chuck943
  • 783 Answers

SOURCE: 1999 ford expedition turn signals not working

It is behind center of instrument cluster just above the accel pedal in the blower/flasher relay block,it is actually a relay on this vehicle.

Posted on Feb 28, 2009

  • 24 Answers

SOURCE: no turn signals but flashers work

You may have two relays one for hazards and one for turn indicators.

Posted on May 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble shoot turn signals 1994 Ford Ranger 2.3 engine


Diane, There are 2 separate flashers on your vehicle, one is for the emergency/4 way lights and one flasher is for the signal lights. It may be worth the couple bucks and replacing the signal flasher as a first step. Recheck bulbs/sockets, fuses/relays, flasher. If all looks good possible signal switch is bad. Remove switch and try to clean contacts or replace switch. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
https://ca.answers.yahoo.com/question/index?qid=20090405174036AARb2Uc
1994 Ford Ranger Turn Signal Electrical Problem 1994 Ford Ranger
93 Ranger Turn Signal Problem Ford Truck Enthusiasts Forums

Aug 20, 2016 | 1994 Ford Ranger Supercab

1 Answer

Turn signal harness 2002 ford ranger 14a320 diagram turn signal connector wire colors and ppin location


images for Turn signal harness 2002 ford ranger

Ford explorer turn sinal problem got fixed - YouTube

? 3:23
www.youtube.com/watch?v=I2SUGIvYAWc
Jul 12, 2013 - Uploaded by Raybob216 My 04 exployer left turn signal and break light not working fix loose wires behind ... bulb and come to find out wire had popped out of the harness. ... How to Change Ford Explorer 2002 Flasher Relay for Hyper Flasher Relay ... How To Install Replace Turn Signal Wiper High Beam Switch Ford Ranger 95-98 ...

Oct 07, 2015 | Ford Cars & Trucks

1 Answer

1993 ford ranger blinkers not working


first check fuse if fuse okay the turn signal lights dont work and flasher dont work problem could be faulty turn signal switch or faulty hazard flasher.which locate on fuse panel under instrument panel to the left of the steering column.

Nov 28, 2011 | 1993 Ford Ranger SuperCab

1 Answer

1998 Ford Ranger flashers work all the time but the turn signals do not work all the time.


The problem is in the switch the flashers and the blinkers work on the same mechisum and have a lot of parts that have to move. My ford almost catch un fire because of this problem last year its a ranger to i had to spend hours repairing the main wireing harnest because of this and when i took it apart it was the flasher that shorted out. The switch was fifty dollars and im vary sorry i didn't fixit sooner

Jan 05, 2011 | 1998 Ford Ranger SuperCab

1 Answer

Changing a flasher module on a 97 ranger


Flasher fo the turn signals or hazard flasher? The turn signal flasher is in the fuse box, left side of dash.

Nov 04, 2009 | 1997 Ford Ranger SuperCab

1 Answer

My 96 ranger turn signals & hazards don't work. Brake lights, headlights, running lights work fine. I replaced the flasher relay, and still nothing. Does anyone know what else to try?


It Could Be The Flasher Switch Or Turn Signal Switch Now This May Not Be Whats Wrong with Yours Now My Ignition Switch came Apart on my car and i lost turn signals and E flashers i hope one of these will help

Aug 15, 2009 | 1996 Ford Ranger SuperCab

1 Answer

Turn signals won't work on steering wheel willl work for emergency flashers?


i hope this helps #1 check fuses#2 check flasher unit (suggestion)replace with a heavy duty flasher
#3it could be in your signal switch under your steering wheel ..on my old 77 ford 4x4 i had problems with all these parts its a ford not bad but you must start with the cheapest and easiest parts and go from there good luck and i hope this helps if it dont i may be able to assist you further email me @ mrdmburns@cableone.net good luck

Apr 25, 2009 | 1996 Ford Ranger SuperCab

1 Answer

Turn signals of my 2002 ford ranger slowly stopped working


I THINK YOU MAY BE BARKING UP THE WRONG TREE. WHERE DID YOU BUY THE FLASHER FROM COULD THEY TELL YOU WHERE IT GOES OR CHECK YOUR OWNERS MANUAL, OR A CHILTONS MANUAL AT AUTO ZOO. SINCE IT WAS A GRADUAL DETERATION I WOULD BE SUSPICOUS OF THE ACTUAL BLINKER HANDEL/WINDSHIELD WHIPER/FLASHER/HIGH/LOWBEAM ASSEMBLY ON YOUR COLUM. THEY ARE AVAILABLE AT AUTO ZOO (ZONE) THIS SWITCH IS REASONABLY PRICED AND NOTORIOUS FOR DEFECTS DUE TO THE USE IT RECIEVES DURING DAY TO DAY DRIVING

HOPE THIS HELPS

Apr 05, 2009 | 2002 Ford Ranger Regular Cab

1 Answer

2001 Ford Ranger right turn signal doesn't work when the braking


Flasher Unit sounds bad... change the flasher, which is in the inboard fuse panel.

Feb 27, 2009 | 1986 Ford Ranger 2WD

1 Answer

1998 Ford Ranger XLT turn signals, hazzard flasher not working


wire plugin on back of turnsignal switch not making a connecting

Jan 14, 2009 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...