Question about Cars & Trucks

1 Answer

Why thermostat is located where the radiator inlet horse is, on 1kz-te engine.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Cars & Trucks Master
  • 310 Answers

To know every think about the think you asked visit to the link given and get the solution http://toolsnyou.com/

Posted on Aug 12, 2017

Testimonial: "that's great, thanks mate"

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: toyota 1kz-te engine overheating

I have an engine 1KZ-TE electronic and calculat but the fire are all cut .and I don't know a electrical diagram

can you please tell me what i should do.
thank you

Posted on Jul 27, 2009

  • 5 Answers

SOURCE: Surf 1KZ-TE Diesel wont fire

check the ecu of your , it may control your plugs,
or check also your spill valve in the injection pump and the timing control valve also in the injection pump.

Posted on Feb 03, 2010

  • 1 Answer

SOURCE: 1kz te automatic turbo engine overheat

Sounds like you have the classic cracked cylinder head the 1KZ TE motors are renowned for

Posted on Mar 24, 2010

thunderz
  • 232 Answers

SOURCE: What is the fuel consumption

Do you mean the how many miles per gallon? Look in your owners manualor call the toyta dealership parts counter and they should know

Posted on Mar 13, 2011

alicantecoli
  • 22156 Answers

SOURCE: My 1KZ-TE engine is misfiring when idling after a run and then suddenley the engine comes under load and really clatters and pours out black smoke, when I chuck it neutral it stops. any answers?

block off the EGR valve with a home made blanking gasket made for a coca cola can .works every time

Posted on Oct 08, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the thermostat located on a 2006 hyundai tucson


On ur tucson find the hoses that leave your radiator. Trace the top hose back to your engine. Locate the thermostat housing attached at the end of that hose.

Apr 17, 2011 | 2006 Hyundai Tucson

2 Answers

Where is the thermostat?


usually is located under the goose neck that the upper radiator hose is attached on the engine. but different engines have aother locations, like at the lower radiator hose where it connects to water pump. try the upper hose first.

Sep 04, 2010 | 1990 Plymouth Acclaim

2 Answers

Where is the thermostate located


The thermostat will be located either at the upper radiator hose inlet to the engine, or it will be located at the lower radiator hose inlet to the engine.

Remember that the spring end of the thermostat should always go towards the engine, and not towards the hose.

Also with a lower mounted thermostat, when it comes time to add coolant you should dis-connect the upper radiator hose at the radiator and fill the engine through the radiator hose, if you do not then there will be very little coolant in the engine block until the thermostat opens up, and by then your engine could be toast.

Apr 30, 2010 | 1997 Toyota Avalon

2 Answers

I need to change my thermostat on a 1999 chevrolet cavalier where is it located


Fig. 1: The thermostat is located in the lower radiator hose on the 2.2L engine

3e9958f.gif


c3d1794.jpg


When adding coolant, it is important that you use GM Goodwrench DEX-COOL® (orange colored, silicate free) coolant meeting GM specifications. On these vehicles, if silicated coolant is added to the system, premature engine, heater core or radiator corrosion may result. In addition, the engine coolant will require change sooner; at 30,000 miles or 24 months.
  1. Disconnect the negative battery cable.
  2. Properly drain and recover the coolant until the level is below the thermostat.
  3. Unfasten the coolant outlet-to-inlet manifold attaching bolt and nut, then remove the outlet.
  4. Remove the thermostat. Clean the inlet manifold and outlet mating surfaces.

To install:
  1. Install a new O-ring onto the thermostat
  2. Place the thermostat in the inlet manifold.
  3. Attach the coolant outlet to the inlet manifold, using the bolt and nut. Tighten to 89 inch lbs. (10 Nm).
  4. Refill the engine cooling system.
  5. Connect the negative battery cable, then start the engine and check for coolant leaks.
Hope this help (remember rated and comment this).

Mar 13, 2010 | 1999 Chevrolet Cavalier

1 Answer

My van is over heating and i think my thermostat is bad.i need a location for were it is on the engine


The thermostat is located in the thermostat housing, which is mounted to the coolant crossover tube. The bypass hose is connected to the thermostat water inlet on one end, and to the intake manifold water outlet on the other. The thermostat is not located in the intake manifold water outlet, where the upper radiator hose is connected.

202a57a.gif
  1. Drain the radiator and recycle the engine coolant.
  2. Remove the upper radiator hose bracket bolt and remove the bracket.
  3. On 1993-98 3.0L engine models:
    1. Remove the bolt from the A/C high pressure line bracket at the front of the engine.
    2. Remove the two A/C accumulator/drier bracket bolts.
    3. Position the accumulator/drier and A/C line out of the way.

  4. Remove the bypass hose clamp and remove the hose from the water inlet.
  5. Remove the four water inlet bolts and remove the inlet.
  6. Remove the thermostat from the inlet.

To install:
  1. Clean and dry the water inlet and thermostat housing mating surfaces.
  2. Apply a continuous bead of RTV silicone sealant 0.08-0.12 inch (2.0-3.0mm) wide to the water inlet mating surface.



NOTE The water inlet must be installed within 5 minutes of applying the sealant.

  1. Install the thermostat in the water inlet, with the jiggle valve at the topmost (12 o'clock) position.
  2. Install the water inlet to the thermostat housing. Install the bolts and tighten them to 12-15 ft. lbs. (16-21 Nm).
  3. Install the bypass hose to the water inlet, using a new clamp.
  4. On 1993-98 3.0L engine models:
    1. Install the accumulator/drier and tighten the bracket bolts to 45 inch lbs. (5 Nm).
    2. Install the A/C high pressure line bracket and tighten the bolt to 45 inch lbs. (5 Nm).
    3. Install the upper radiator hose bracket and tighten the bolt to 34-48 ft. lbs. (46-65 Nm).




NOTE Allow the sealant to dry for at least 30 minutes before adding coolant.

  1. Fill the cooling system. Run the engine and check for leaks.

Sep 10, 2009 | 1999 Nissan Quest

4 Answers

1kz te automatic turbo engine overheat


Sounds like you have the classic cracked cylinder head the 1KZ TE motors are renowned for

Aug 05, 2009 | 1995 Toyota 4Runner

3 Answers

Toyota 1kz-te engine overheating


I have an engine 1KZ-TE electronic and calculat but the fire are all cut .and I don't know a electrical diagram

can you please tell me what i should do.
thank you

Mar 18, 2009 | 1995 Toyota 4Runner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75842 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...