Question about Cars & Trucks

Open Question

Tao Tao 125 go cart. Can't get fire to the spark plug. Can you help? Changed start switch, check all visible wire connections, spark plug, wire to the spark plug and one other relay.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76164 Answers

SOURCE: 95 mercury grand marquis firing order of spark plug wires

go this page for firing order, u have 4.6 L V8
http://www.moddedmustangs.com/reference/firing-orders.php

Posted on Feb 16, 2009

Ad
  • 65 Answers

SOURCE: 626 won't start no spark

Distributor fault, the coil goes down in tyhem and sometimes pops the ECU.

Posted on Mar 23, 2009

  • 1129 Answers

SOURCE: one of the four plugs is not firing. Spark plug

replace the coil pack for that plug that is not firing

Posted on Aug 05, 2009

  • 7353 Answers

SOURCE: i have a miss fire

Make sure the plug wires are in the right place. The passenger side is cyls, 2 4 6 and the drivers side is 1 3 5. The dist cap should be marked but the pass side is, going front to back 2 4 6 , coil wire and the drivers side is 3 1 5

Posted on Nov 13, 2009

freetek
  • 5568 Answers

SOURCE: 95 geo metro 3cyl. 1.0L no spark changed

Pull one or two sparkplugs and check them for moisture; not fuel, but for water beads.
I don't know how long your engine ran after losing coolant but there is a chance that you lost the head gasket and have gotten water into the cylinders.

Posted on Nov 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1995 geo metro humid weather starting problems 3 cylinder


Next time it doesn't start, spray your plug wires and distributor cap with WD40. If it fires right up replace your plug wires. I had the same problem with my 3 cyl 1.0L .

Feb 20, 2015 | 1995 Geo Metro

1 Answer

01 aurora 3.5 changed intake gaskets and now no spark. Ran when I started took checked all plugs and re gaped checked all fuses checked all elec con. Any idea?


Check your coil connection. That is where you are getting your spark in the first place. Start there. Maybe the coil plug is not connected, or the wiring leading to the coil became loose. I hope you didn't disconnect the wiring sequence because if you did to make the job easier then you will need to get the firing order to make the spark work on time with the engine. I hope this helps. GE

Dec 02, 2013 | Cars & Trucks

2 Answers

1993 honda accord lx new coil no spark


The 1993 Honda Accord LX came with a 2.2 Liter Inline 4 cylinder engine. It gets 125 horsepower. ------------------------------------------------------------------------------
Renault CAN Clip

Apr 08, 2013 | 1993 Honda Accord

1 Answer

Truck wont start after changing the spark plug and wires


It's already not start before you changed or after changed ?
If before. the timing belt or might be broken , burn fuel pump's fuse, injector's fuse or main engine relay.
If after. It's possible miss some wire that still not connect.

Mai

Feb 26, 2013 | 1986 Ford Bronco

3 Answers

My husband did a tune up on my car yesterday and now it wont start it will turn over like it wants to start but it wont he said that its miss firing we have bought 3 new coil packs and still will not start...


If your car is miss firing and your husband changed the coil packs,the wires leading from coil packs to sparkplugs must have got crossed.This will change car timing which will result in the car miss firing.He needs to go over wiring and correct problem for car to run right.You can go online to autozone.com and type in Info about car to get the correct wiring layout.Your problem isnt the new plugs n wires.Its the wiring layout.

Feb 09, 2011 | Pontiac Grand Am Cars & Trucks

1 Answer

After it stops, the car sit for about 2 hours or


Possible cause would be the coil breaking down. After the car starts and runs again and stops take a inline spark tester and connect between the coil and the spark plug wire to check for fire. If no fire then remove the coil and replace it. hope this will help you.

May 10, 2010 | 2001 Dodge Intrepid

2 Answers

Just changed out my spark plugs, wires, distributor cap and rotor. Now the car wont start, what is the problem ?


Recheck the firing order of the spark plugs and wires. you might have connected them wrong. Can't tell you the firing order since I don't know what kind, make, or year of your vehicle.

Mar 15, 2010 | 1997 Honda Civic

1 Answer

Motor won't start


You need 3 things for a start condition 1 spark 2 fuel 3 compression. If you have lost spark and have changed wires and coil then you should look at the crankshaft position sensor. This sensor tells the computer when to fire the coil and which plug to fire. Hope this helps. I will check back on the 14th.

May 14, 2009 | 1990 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...