Question about Chrysler Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Go to www.audidiy.com or www.audiworld.com (look in their Tech area), and there are full procedures on how to do it (it's the timing belt service). It's not a difficult job really, but you may need to get some specialty tools such as Torx bits to do the job.
Make sure that you get G12 coolant from VW/Audi (the pink kind) and if you have some other color in there now, flush it fully before adding the G12. You can order everything you need, including coolant, from www.ecstuning.com (I've used them many times with full satisfaction). Don't waste your money on the advertised cam locking tool - it's very expensive and wholly unnecessary. Its intent is to keep the cams from spinning, but if you position the #3 cylinder (rear passenger side) to top-dead-center on its compression stroke, the cams would have to be hit with a hammer to turn them.
The job is not difficult really. I've done many timing belts on many cars before, so I know what I'm doing overall, but the first time I did an Audi 2.8L V6, it took me a total of 5.5 hours start to finish. Many other cars (like my 300ZX) take that long just to reach the timing belt. As for how these kinds of jobs go, this is a very easy one.
Buzz me back on here or in email at firstname.lastname@example.org if you have any questions you'd like answered related to this or the rest of your car and I'll do what I can to help you out.
Posted on Jan 03, 2009
Typically, when when this happens, the system is low on fluid and/or must be bled. Here are the procedures:
Lower the top to the full down position.
Posted on Apr 17, 2009
you need to loosen the clamp on the throttle body and unplug the map sensor then there are two clips on the other end pull that out and you should be able to pull the filter out you don't need to take the box off.
Posted on Apr 28, 2009
i have a 1997 chrysler sebring LX Coupe and i can't figure this out i got a aftermarket jvc cd player and i got the wiring harness for my car chrysler and i am not getting any sound please help me
Posted on Apr 01, 2010
Tips for a great answer:
Oct 28, 2017 | Chrysler Cars & Trucks
Mar 09, 2016 | 2008 Chrysler Sebring Convertible
Jul 22, 2014 | 1998 Chrysler Sebring
Nov 04, 2012 | 1998 Chrysler Sebring
Nov 22, 2010 | 1998 Chrysler Sebring
Jul 06, 2010 | 2001 Chrysler Sebring
Mar 08, 2010 | 2000 Chrysler Sebring
Nov 11, 2009 | 1998 Chrysler Sebring
Sep 30, 2009 | 1998 Chrysler Sebring
37 people viewed this question
Usually answered in minutes!