Question about Cars & Trucks

Open Question

My 2013 RDX cruise control will not engage. The light indicates that it is turned on, but pushing the "set" does nothing. What gives?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: cruise control won't engage

most likely the clock spring is not the problem because when u push the button the dash light cruise comes on.wich means that you do not have an open circuit.with a light tester check to see if you are getting power to the cruise control servo.if you are then replace it.if no power you will need a new cruise control stick on the steering column.

Posted on Jan 08, 2009

  • 2 Answers

SOURCE: 2002 Honda Accord EX V6 cruise control failure

http://www.handa-accessories.com/accord/accswc.jpg

So after you push the button and then press the set button in the steering wheel it does not get into cruise control ? It sounds like a minor electrical problem. If you have warranty still I think the dealership should fix it for free.

Sorry i have not been able to help you.

Posted on Jan 22, 2009

  • 56 Answers

SOURCE: 2001 buick LeSabre cruise control

no not a fuse may be the switch itself this is common and parts are not badly priced. replace the switch. It just pops out. The directions will tell you to take out the airbag first but it will sneek out of there.

Posted on Feb 13, 2009

  • 32 Answers

SOURCE: 2004 Ford Freestar cruise control not working

Try pulling up the brake pedal with your foot,Sometimes your brake doesnt come back all the way,and the brake switch keeps the cruise from working.Also,check the fuse.If those answers dont help,It could be the swith itself is bad.Those can be bought at a parts store.

Posted on Jul 26, 2009

mrgreenz
  • 962 Answers

SOURCE: 2007 GMC Yukon Cruise Control

Check the speed sensor. Look up the location at autozone .com or google. It is either near the tranny or at the passenger side wheel. The speed sensor is almost always connected to cruise control problems.

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Dodge ram 1500 4x4 4.7 liter, cruise control light comes on the dash. When I push the set button nothing happens and the light that says cruise on the dash stay on but will not engage


Locate and check the fuse, check clutch switch, che k vacuum hoses, and vehicle speed sensor and throttle linkage. Hope that helps.

Dec 18, 2015 | Dodge Cars & Trucks

1 Answer

Cruise control won't engage


cruise controls are governed by 5 settings and sensors
one is engine rpms
vehicle road speed ,( manual transmission will not activate under 20 klms /hr
brake pedal switch
clutch pedal switch ( VSS if auto)
off/on switch control
any one of these not lined up will not allow the cruise control to work

Oct 13, 2015 | 2013 GMC Sierra 2500HD

3 Answers

My cruise control does work, push button to set then nothing


After much research & frustration, I learned this seems to be a fairly common problem with the Freestar. (along with many other problems.) We replaced the Brake Pressure Sensor and it corrected the cruise control problem and the Traction Control light. I think the part was about $30. & we were able to replace it ourselves. Hope this helps!

Feb 22, 2015 | 2004 Ford Freestar

1 Answer

2003 oldsmobile alero v6 -- cruise control stopped working...The cruise on/of button lights up, the green light cruise indicator comes on in the dash panel, but cruise control does not engage when CST SET...


Try checking the small switch at the top of the brake pedal. There may be two one for brake lights and one for the cruise control. To ascertain what is what, pull one wire off and see if brake lights work. If not, then the other switch controls the cruise control disconnect and engage..I you have a DC test light check to see if power is on on both side of the switch with brake pedal up. If so, depress pedal and check power on the other side there should be none, if there is the switch is defective.

Aug 02, 2017 | Cars & Trucks

1 Answer

Speed control set/accel won't engage 1996 lincoln towncar


I have a 2001 lincoln an when i try to set the cruise the light will flash but it will not set ?

May 15, 2012 | 1996 Lincoln Town Car

2 Answers

The cruise control switch will not engage or set when pushing set button, but the green cruise light is on on the dash.


Check your fuse panels both inside, and outside the vehicle, as well as the connections to the cruise control.

Mar 29, 2011 | Nissan Frontier Cars & Trucks

2 Answers

Cruise Control on 2 door Sport 4x4 with SOHC: Non-working cruise control. When turned on, cruise control does not engage, no dash light indication either.


look in your owner's manual for the location of the cruse control fuse it is different from other fuses usually much larger

May 21, 2009 | 1999 Ford Explorer

3 Answers

"Cruise" on a 5-speed '00 Hyundai Elantra


I have this same car. The place you set speed control is on the windshield wiper switch on the right side of the steering column. The button with the indicator light has to be pushed in order to use the cruise control but just because the indicator light is on, it does not mean the cruise is on. Hope this helps a little. If you need more info and someone else doesn't answer more eloquently.. I'll check back and try to give you more info. :-)

Apr 09, 2009 | 2000 Hyundai Elantra

2 Answers

Cruise control won't engage


most likely the clock spring is not the problem because when u push the button the dash light cruise comes on.wich means that you do not have an open circuit.with a light tester check to see if you are getting power to the cruise control servo.if you are then replace it.if no power you will need a new cruise control stick on the steering column.

Dec 06, 2008 | 1999 Volvo S80

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...