Question about Toyota Cars & Trucks
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Toyota Highlander 2005
The timing belt runs from the crankshaft pulley up to the head, around the cam gears, back down, over the water pump and back to the crankshaft. Timing belt replacement is a job that is time consuming, and, at times, difficult. If you do not have the proceedure, I can send it to you, but, this is a very specific job, and having the belt incorrect in any one of 6 possible "mistake" positions will result in a no-start or run poor condition. Timing belt replacement for that vehicle is recommended at 90,000 miles.
Posted on Oct 18, 2008
Reverse the wires, one is hot going up and the other hot going down, the easiest way to deal with this is to just reverse them.
Posted on Nov 29, 2008
Turn vehicle on, with foot on brake put vehicle in NEUTRAL. Still holding brakes move 4x4 switch to 4 wheel drive, it should engage. The ECT snow is just s feather that make the transmission take off in 2nd gear so its not a fast take off and you wouldn't skid. Good Luck
Posted on Dec 21, 2008
SOURCE: 2005 Toyota Corolla Radio fuse
Pg. 250 of your 2005 Owner's Manual shows the location of the Fuse Boxes. There is one under your hood on the driver's side and the other is under the dash just to the left of steering wheel. Pg 272, will show you how to replace the fuses. Pg. 286-287 gives a diagram and description of each fuse and what part of the electrical system it enables.
This portion of the electrical system correspondeds to the fuse in position 32 on pg. 287 of the manual.
Your going to have to get on your back with a flashlight and open up the fuse box under the dash by the steering wheel. The lid of the fuse box shows the positions of the fuse and their amperage rating. Like I said, replace the fuse in postion 32 (15 Amp). There is a spare 15 Amp fuse in the fuse box under the hood (easy to get to, see the diagrams in the owner's manual). There is also a fuse puller tool next to the spare fuses.
Posted on Aug 11, 2009
Tips for a great answer:
Mar 29, 2016 | 2009 Toyota Highlander
Oct 12, 2015 | 2005 Toyota Highlander
Feb 27, 2012 | 2010 Toyota Highlander
Disconnect the negative battery cable and ensure it doesn't contact any metal parts. Place the transmission into the "Drive" position and set the parking brake.
Remove the trim from around the stereo by prying at one of the bottom corners with your fingers. Apply pressure until the clips disengage and work your way up the trim. Once the trim is free from the dash set it safely aside.
Locate and remove the six 10mm bolts that hold the stereo in place. Pull the head unit out of the Toyota highlander dash and disconnect the wires from the back of the radio.
Connect the wiring harness adaptor to the original harness. Mount the new stereo into the Toyota radio mounting kit and secure it by following the manufacturer's instructions. Plug the wiring harness adaptor and antenna wire into the back of the new stereo.
Slide the entire stereo assembly into the dash and reconnect the battery cable. Turn the radio on and verify the speakers and controls are working on the new stereo. Secure the stereo in the dash with the six 10mm bolts and replace the trim ring around the radio.
Dec 07, 2010 | 2003 Toyota Highlander
Oct 31, 2009 | 2005 Toyota Highlander
Jun 14, 2009 | 2005 Toyota Highlander
Oct 12, 2017 | 2004 Toyota Highlander
45 people viewed this question
Usually answered in minutes!