Question about Cars & Trucks

Open Question

K40 unit not working

The on switch does not lite up.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is Mercedes SL500 03 Driver side fuse box number written?.


25660313-gzlitkkmpivxc3y0guv5d0lz-1-0.jpg
Fuse Terminal Cable ID (fused) Fused function Rating in amperes (A) F1 30 - Wiper park position heater relay (K40/2kA) F2 30 - High pressure and return flow pump relay (K40/2kF) F3 30 - Steering column forward/back adjustment relay 1 (K40/2kD)
Steering column forward/back adjustment relay 2 (K40/2kE) F4 30 - Steering column height adjustment relay 1 (K40/2kI)
Steering column height adjustment relay 2 (K40/2kJ) F5 15R - Wiper On and Off relay (K40/2kH) F8 30 RD 0.75 Central gateway control unit (N93) F9 30 PKWH 2.5 Left door control unit (N69/1) F10 15 BKVT 0.75
BKVT 0.75
BKVT 0.75 Left front headlamp unit (E1)
Right front headlamp unit (E2)
Xenon headlamp control unit (E1n1, E2n2) 15 RDGN 0.75 Restraint systems control unit (N2/7) F11 15R BKYE 1.0 Circuit 15R/30 cutoff relay (K75) F12 15R - Spare F13 30 RDGN 1.5 ABC control unit (N51/2) F14 15R BKGN 0.75 Windshield washer fluid pump (M5/1) F15 30 RDGN 1.0 Data link connector (X11/4) F16 15R PKYE 1.0 Valid for code (855) TELE AID:
D2B telephone and TELE AID transmitter/receiver (A35/17) 15R PKYE 1.0 Valid for code (853) MB standard telephone:
D2B telephone transmitter/receiver (A35/13) F17 15R RDYE 0.5 Vehicle-sensitive seat belt lock sensor (A60) F18 15R - Spare F19 15 BKYE 1.00 Valid for engines 112.973, 113.963/992:
Fused via circuit 15 connector sleeve (Z3/29):
Cylinder 1 ignition coil (T1/1)
Cylinder 2 ignition coil (T1/2)
Cylinder 3 ignition coil (T1/3)
Cylinder 4 ignition coil (T1/4)
Cylinder 5 ignition coil (T1/5)
Cylinder 6 ignition coil (T1/6)
Cylinder 7 ignition coil (T1/7)
Cylinder 8 ignition coil (T1/8) F20 15 BKGN 0.75 Data link connector (X11/4) F21 15R BKYE 0.5 Instrument cluster (A1) F22 30 RDYE 0.5 Instrument cluster (A1) F23 30 RDWH 1.0
RDWH 1.0 AAC [KLA] control and operating unit (N22)
Coolant circulation pump (M13) F24 30 RDWH 0.5 Stop lamp switch (S9/1) F25 30 RDYE 0.75 Alarm signal horn (H3) F26 30 RDBU 0.5 Lower control panel control unit (N72) F27 30 RDVT 2.5 Left front seat adjustment control unit with memory (N32/1)

Apr 22, 2015 | 2003 Mercedes-Benz SL-Class

1 Answer

My back indicator is not working on the right any suggestions of fixing it


A think the switch in the stering stil mooving that wy the lite is open or chech the ignition switch , mabe you have to much key on you set it to heavy for the ignition end when you close your ignition the light still open

Dec 03, 2014 | 2007 Opel Corsa Utility

1 Answer

Fuel pump relay switch for a 96 Mercedes-Benz E 320


I believe it is integrated in the K40 relay module in the front right engine compartment next to the ME control unit. I also believe the 97 W210 relay was moved outside of it. That fuel pump should be outside of the tank so it will be easy to test for power and ground at the pump if you are having a fuel related issue. I have replaced many more fuel pumps on these vehicles than relays. I usually replace the relay as a precautionary measure, but not because it failed. I hope this helps you.

Jul 26, 2014 | 1996 Mercedes-Benz E-Class

1 Answer

2003 jetta. EPC lite is on. brake lites do not work. cruise does not work.


Check all your ground points. The brake lights and cruise may be grounded to the same spot. Re-check the cruise fuse and brake/tail light fuses.

Oct 13, 2012 | 2003 Volkswagen Volkswagen Jetta

1 Answer

MY BRAKE LITES WERE OUT FROM THE PETAL BUT STILL WORKED FROM THE TRAILER CONTROLER SO I CHANGED 0UT THE BRAKE SWITCH. FOLLOWED THE INSTRUCTIONS FOR THE SWITCH PROVIDED INT THE BOX FROM NAPA PARTS. SAID...


The switch has a small plunger that has been pushed in too far. These are self adjusting units. You must pull out on the plunger with the brake pedal pressed, you will here it make noise as you pull out. This is normal then just release the brake and the pedal will set the length of the plunger for you. NOTE do not pull up on brake pedal, this will throw your adjustment off!

Aug 13, 2009 | Dodge Pickup Cars & Trucks

3 Answers

Brakes lights on 2001 Volvo


u might have a wiring problem like a short in a harness,.hope this works

Nov 20, 2008 | 2001 Volvo V70

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...