Question about Cars & Trucks

Open Question

My mgf turns over but dose not fire i am thinking some thing with my key door dose not lock

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 435 Answers

SOURCE: have a honda accord. 98.

Yes, the driverĀ“s door has the master switch for everything. No need to dismount the door panel. Look inside the door grab rail ( which is part of the window switch subpanel)and there is a tiny black plastic cover that hides a single phillips screw. Lift the cosmetic screw cover with a tiny flat screwdriver, there is a slot to insert the screwdriver, to lift it. PARTIALLY, just enough to see the screw.Unscrew it, and the whole subpanel comes out, pulling upwards. The screw plastic cover is very frail, and has a slave strip that attaches it to the bottom, when unscrewing, be very careful not to break it. The subpanel itself has 2 or 3 connectors to handle window / window lock and remote mirror duties. Check that all connectors are plugged in firmly. If they all were attached to begin with, check that the contacts have not rusted.

Posted on Aug 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot open drivers door of my 1996 honda crv automatic using key or from inside. having to climb over from passenger side to drive and get out again.


Sue we arn't talking keyless entrey here .
Then if the key works in the other locks it must be good not worn out .
Witch leaves the lock cylinder on the drivers door or the mechinizam that moves the rods inside of the door to lock and unlock it .
Dose the key feel like it fits ok and the lock turn normally .If so that leaves the mechinizam inside the door .
Its not the end of the world likely something popped off or a little plastic clip broke that holds the rod in place .
The door needs to be taken apart from the inside witch means it needs to be open to repair .Its like a caught 22 can't fix it unless its open but can't open it .
There are ways slim jim or the old coat hanger way if you can roll the window down think about it do a little reserach it can be opened with out distroying the door

Apr 24, 2015 | Honda CR-V Cars & Trucks

1 Answer

2001 hundai accent cannot unlock car doors with key. It worked on doors lastmonth. Have used lock deicer, wd-40 to no avail. Key works in ignition & trunk.


dose the key turn in the lock you could have a worn door lock where the plastic link bar on the back of the barrel gets a bit worn and just dosnt pull the link bar up enough , you realy need to remove the door pannel and really look at whats happening to the lock from inside the door checking the movement when you turn the key to unlock position you may even take up any play on the link bar to the latch lock by putting a slight bend in the bar to take up the slack

Apr 09, 2013 | 2007 Hyundai Accent GLS

1 Answer

Honda civic stuck in deadlock can't open any doors as the key won't work in any of the door lock's or boot


Try having a new key cut using the key code, at a dealer, not tracing the old key.

Feb 25, 2013 | 2003 Honda Civic

1 Answer

2000 cadillac deville driver side won't open with the key


1) Key turns but dose not unlock door. This means that the rod that goes to the back of the lock has came off. This also means that is the reason door is not unlocking with the remote as it pops the lock rod inside the door which pushes the lock open.
2) Key does not turn lock at all but works passengers side door. This means that the locks has been changed in the door, but that doesn't sound like the problem as you say the remote doesn't open the drivers side door so more than likely the rod has came off the back of the lock

Nov 07, 2012 | Cars & Trucks

1 Answer

Drive side power door lock is not working


If the door lock works ok with a key, I would say the lock actuator is failing. Its a small electric solenoid that moves the lock rod.

Jun 26, 2012 | 2008 Hyundai Veracruz

1 Answer

How do you take off the fuel sender on a MGF


On American cars, the fuel sender and pump are held in the tank by a lock ring that is turned or tapped with a punch till it turns to a point where the lock ring can be removed. The plate below it then lifts out of tank and the pump and sender unit are attached to the plate. A large o-ring fits between the tank and the plate. I don't even know what a MGF is.

Jun 13, 2012 | 1995 Rover MGF

2 Answers

Have the remote for lock & unlock But the thing locks w/o touching remote. When driving, when parked, etc. it just locks by itself.


hi there
there may be a few things here
1. there may be a sensor on the drivers dor that thinks that it has been locked so it locks all the doors. this happens after a few years my sisters carnival dose the same
the locking motor witch has the sensor in it may need to be replaced
2. in australia 2004 hyundai came out with a featur called "halo"
it was designd to stop perole hijacking cars the doors would lock them selfs after the car was started and incase or accedent the doors would unlock
this may be a feature or a fult due to age
either way its not expencive
hope this helps
ricko

Jul 04, 2009 | Hyundai Motor 2003 XG350

1 Answer

The remte control key is not responding with the car


Hi abdumi0f,

Firstly, open your glove box and make sure Valet Mode is not enabled, if it is not, follow these steps.

Step 1: Open drivers door and leave open.
Step 2: Lock and unlock the driver’s door using the power door lock switch on the door.
Step 3: Insert key into the ignition.
Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.
Step 5: Open and close the driver’s door 3 times. (Door should be left open after this step).
Step 6: ECU should respond by locking and unlocking the doors.
Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors.
Step 8: Press any button on remote #2 (etc.) twice. Each time the ECU will respond by locking & unlocking the doors.
Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!

Hope this helps,

Lazaruselite

Feb 24, 2009 | 2007 Mercedes-Benz E320 BLUETEC Sedan

2 Answers

Door and trunk locks wo'nt work/turn with key


sounds like you may have the wrong key

Jan 28, 2009 | 1996 Ford Taurus

2 Answers

Key on 2005 hemi


I have the same problem. I took the printed circuit board out of my key and tried it. It worked great, so I bought a new key case and put the circuit board in it.

No, I don't think that there is any way to turn off the alarm if you open the door manually with the key.

Sep 17, 2008 | 2005 Chrysler 300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...