Question about Cars & Trucks
Check the wiring for chafing or damage in the door jamb. Possible electrical short, check all the fuses.
Posted on Aug 11, 2017
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 92 F150 power window and locks
try taking apart and cleanig all contacts first. make sure you are getting power to switch. Sounds more switches are going bad. They usually last about 5 to 7 years before they start going out.
Posted on Jun 11, 2008
Are you hearing any noises from the pass door when you activate the lock switch? If not, the power door lock solenoid has failed, and prob needs to be replaced. Pull the door panel & check to see if it is getting power to the solenoid in lock & unlock. If it has power, the solenoid is def bad.
Posted on Sep 19, 2008
SOURCE: change headlight
Behind the low beam and high beam lamps, on the back of the assembly, you can see and feel a round, cup-like, hard plastic piece. This is really just a rubber cap covering a plastic cylindrical housing, and is the "back-door" for lamp access. This rubber cap, or lid, can be pulled off with your fingers...if you can grip it just right and pull off. If this is too hard to do, then take a flat tip screwdriver and gently "pry" it off. Once you see how it is attached, your going to do a 180 and say, "gee, this is a pretty easy design" !
The bulbs do not pull out!! They are removed with a 90 degree twist.
If you are going to replace the passenger side low beam remove the air cleaner assembly first. To do this remove the cross brace, then the 3 screws on the air cleaner assembly. This will give you easy access to the bulb assembly. Test the bulb before you reassemble. ADDITIONAL OPTION: On each side of the assembly, you will see a small, thin release bar that will pull up (I needed a small pliers to get one loose). Once both are in the "up" position, the entire assembly can be gently eased out. You won't get far because the other bulbs are still plugged in. However, you don't have to unplug any of the other bulbs or remove the air cleaner. Easing out the assembly simply proves more room for your hand to get a better angle at the bulbs. I simply reached around and removed the old bulbs as specified above and did the reverse to insert the new ones.
Posted on Dec 10, 2008
PULL THE DOOR OFF MAKE SURE THE 2 LITTLE DOOR HANGERS ARE CONNECTED TO THE SWITCH MECHANISM IF IT IS. THEN YOUR SWITCH IS BROKE. GO TO SCHUCKS AND ASK THEM IF THEY CAN ORDER YOU A WHOLE NEW DOOR LOCK SWITCH ASSEMBLY. REWIRE AND TAA-DA!!!
Posted on May 10, 2009
Generally fuses control an entire system, in this case it sounds as if you have a wiring problem such as a plug has come undone that wires the door equipment. Check the wiring that goes to the door, follow it to your problem.
Posted on Sep 29, 2009
Tips for a great answer:
Mar 08, 2017 | 2002 Oldsmobile Bravada
Apr 06, 2011 | 2002 Chevrolet TrailBlazer
Oct 11, 2017 | 2002 Volkswagen Golf
Apr 12, 2017 | 2006 Chevrolet Trailblazer
Feb 23, 2010 | 2004 Chevrolet TrailBlazer
Sep 10, 2009 | 2002 Chevrolet TrailBlazer
Aug 15, 2009 | 2002 Chevrolet TrailBlazer
Apr 18, 2009 | 2002 Chevrolet TrailBlazer
Nov 15, 2008 | 2002 Ford Explorer
25 people viewed this question
Usually answered in minutes!