Question about Dodge Conquest
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Before you start self repairing, you really should by a manual with proper diagrams to prevent heading in wrong directions.
The PCM doesnt control injector POWER. It controls injector GROUND. The POWER comes from the ignition switch and goes thru a fuse in teh fusebox probably marked ECM1 or ECMa. If you have power at both sides of that fuse with the ignition key in the ON position, then you have a broken wire between the fuse and the TBI. If you have no power to that fuse, you may have a broken wire, blown fuse, or defective ignition switch.
Posted on Oct 04, 2009
Testimonial: "Thanks For info. Had A broke wire at fuse panel. repaired wire and blazer started right up. Thanks Again."
SOURCE: 88 dodge conquest tsi no
you can disconnect 1 of the wiring connectors to the fuel injectors one at a time, and hook up a noid light into the wiring connector, and then turn ignition on, and watch for the noid light to flicker, this will show you that there is electricity going to the fuel injector, if this all checks out, then you can also use a mechanics stethoscope , and place the probe onto each fuel injector with the wiring connected, and then crank the engine, to see if you hear a clicking noise coming from the injectors, the injector that has liitle or no sound is the bad one.
Posted on Apr 03, 2011
,Use caburator cleaner and spray down the throttle body and put the air duct back on if this start up and then dies your fuel pump is the issue, If you dont have spark and want to test for spark take the lead spark wire from the ignition coil let it hang 1/4 from body ground and have some one crank it if you dont have spark replace the sensor in the distributor.(optic sensor its hall effect). if you have spark and fuel. note the postion of the distributor and move it foward. if it wants to start and cant check for a slipped timing belt,by the way Plymoth made the conquest TSI
Posted on Feb 27, 2012
With the key on do the fuel injectors have one wire that shows (+) battery voltage of 12+ volts? If not check for a shorted engine wiring harness, also check all fuses marked "ECM" there should be two fo them. ECM 1 and ECM 2.
Posted on Nov 01, 2012
Tips for a great answer:
Jan 26, 2017 | 1987 Chevrolet Blazer
Apr 28, 2014 | 1987 Chrysler Conquest
Jul 12, 2012 | Ford Cars & Trucks
Apr 03, 2011 | 1985 Dodge Conquest
Dec 26, 2010 | 1993 Toyota Corolla
Apr 26, 2010 | Audi A6 Cars & Trucks
Feb 08, 2010 | 1987 Ford F 150
Nov 23, 2009 | 1987 Chevrolet S-10 Pickup
Mar 31, 2009 | 1987 Chrysler Conquest
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: