Question about Cars & Trucks

2 Answers

05 neon driver side wheel front leans inward - Cars & Trucks

Posted by on

  • Tom Colton
    Tom Colton Aug 10, 2017

    Read comments i added

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Every thing is off in the car i

Posted on Aug 10, 2017

  • Joseph kenney Aug 10, 2017

    Every thing is off in the car i

  • Tom Colton
    Tom Colton Aug 10, 2017

    Every thing is off in the car i ???? What do you mean by this kinda left me hangin. I counted tie rod end threads reinstalled same number. Marked bolt locations and like i said no pull shimmy or shake but did find bad lft frnt bearing was bad causing inner shoulder wear. Replaced it but now seems like it has conflicting toe

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Cars & Trucks Expert
  • 163 Answers

Have the ball joints and track rod ends checked out asap as this wheel could collapse while driving

Posted on Aug 10, 2017

  • Tom Colton
    Tom Colton Aug 10, 2017

    The wheel isnt leaning inwards at a severe pitch let me give you the work involved so far qnd parts ive replaced. Inner and outer tie rod ends ball joints,swaybar endlinks and bushings struts and mounts and recently left frt wheel bearing

  • Tom Colton
    Tom Colton Aug 10, 2017

    Now the vehicle doesnt shimmy or shake or even pull but when traveling into a corner at a high rate of speed the front wheels squeal as if the toe in is clnflicted...suggestions?

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5495 Answers

SOURCE: i have 95 ford f150 my front wheels are leaning

Some lean can be normal, but if you are noticing it after owning the truck for awhile you are right to be concerned.

If you know how to check the balljoints, check them for excessive movement. Also look at your tierod ends. If it has been some time since you had an alignment now would be a good time to do it. The parts have to be tight to hold a good alignment.
Most places will do an estimate first before the repair. This will give you a chance to change out the parts you feel comfortable about and save a little money.

Posted on Dec 01, 2009

  • 157 Answers

SOURCE: front right wheel is leaning inward

You have a major amount of positive camber. You car must be undrivable. Did you hit something? You need to get it into a suspension centre and find out what has been bent.

Posted on Mar 27, 2010

  • 1 Answer

SOURCE: my front passenger side tire is leaning inwards

your alignment and suspesion conponents are out of whack

Posted on Dec 17, 2010

  • 5495 Answers

SOURCE: the rear driver side wheel

You did not indicate which Model vehicle this is. In general, a car with front-wheel drive has rear wheels which are Independent of each other. This means there is no solid axle going from one side of the car to the other.

The Independent rear wheel is mounted to a strut. The strut assembly is adjustable and gets an Alignment just like the front-end parts do. It must be put on an Alignment machine. Another area which can tilt a rear wheel is a severely worn spindle or wheel bearing.

This would mean the rear strut may be properly in place, but the spindle and bearing inside the rear brake drum or rotor has too much play and is allowing the wheel to tilt. You would hear a loud grinding noise if the bearing is bad.

I do not want you to ignore getting your car checked, but a complete answer includes vehicles which have the rear wheel construction built to allow for the rear wheels to flex in and out depending on terrain and load. These would be the cars where if you jacked them up, the rear wheels would not come down straight. It takes a few miles before the parts level out.

You should take the weight off the one wheel and see if there is play anywhere. The struts can be shimmed and the shims may have fallen out. You may have a rusted strut tower. Once you assure yourself the car is safe to drive for Alignment, thats the next step.

Thanks for using Fixya. I hope my solution is very helpful to you.

Posted on Jan 10, 2011

  • 6468 Answers

SOURCE: adjust camber right front on chevy cobalt

camber is changed by moving the bolts the hold the strut to the knuckle find more that the strut and or knuckle get bent

Posted on Jun 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge neon tire leans in


Yes, Brad, you have a severe problem.
Please try not to drive the car at all until the assembly ( all the defective pieces) are replaced, or you will likely have that wheel fall off really soon.
If it were me, I would not even drive it to a repair shop, I would have it towed.
God bless your efforts.

May 08, 2017 | Dodge Cars & Trucks

2 Answers

Front driver side leaning inward, have changed strut,etc...


Upper and lower ball joints. Control arm bushings bad. or both.

Jul 09, 2016 | Cars & Trucks

1 Answer

On my 2000 sierra the front passenger tire leans inward on the top n there is no brakes what can it all be


did you hit a curb or pot hole on that side? this can cause the leaning wheel. also if the camber shim or adjustment is loose will cause it also. no brakes sounds like a brake fluid leak if you talking about the same side or if its both sides it could be the master cylinder.

Mar 07, 2015 | 2000 GMC Sierra

1 Answer

2004 chevy venture van front left side tire is


Check the front wheel bearing. jack the vehicle up, grab the tyre and check for movement of the wheel hub while the steering is locked. Any excess movement will cause the issue.

Oct 16, 2014 | Cars & Trucks

1 Answer

Front passenger wheel leaning on 98 expedition


This is most likely a ball joint problem. If you can, jack that tire up in the air and see if you can move the whole tire in and out from the top. Try to see if there is movement in the ball joints while you move the tire. If that is not the problem, it could be a wheel bearing, but i would check the ball joints first. Hope this helps.

Feb 23, 2013 | 1998 Ford Expedition

1 Answer

Adjust camber right front on chevy cobalt


camber is changed by moving the bolts the hold the strut to the knuckle find more that the strut and or knuckle get bent

Jun 24, 2012 | Chevrolet Cobalt Cars & Trucks

1 Answer

Tire leaning inward and steerling wheel cocked


probably a tie rod end issue, and you definitely need an alignment bad. sounds like you might have bent something as well

Jan 26, 2012 | 1990 Chrysler New Yorker

1 Answer

Why is my tire leaning?


sounds more like a strut problem that needs to be checked

Nov 17, 2011 | 2001 Dodge Durango

3 Answers

Drained break fluid and pedal goes to floor, i have a 95 dodge neon i also have Bleed all the wheels starting with the rear pass side it is normally the furthest from the master cyl then the other rear...


start from the rear driver side, and then the rear passenger side, and the front passenger side,and then the driver side make sure you keep plenty of fluid in the master cylinder during bleeding proccess

Apr 09, 2011 | 1995 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...