Question about Toyota Cars & Trucks

1 Answer

I recently put new headlight assembly's in my wife's 2007 Toyota RAV4; headlights work great but turn signals don't work at all. Checked the bulbs, they are good. Any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 8,206 Answers

Usually the flasher unit but can also be the switch.
check your owners manual for the location of the flasher.

Posted on Aug 10, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 46 Answers

SOURCE: Headlights Not Working, Brights and Turn Signals Work

This is cuased by the multifuntion switch that is located on the steering column. It is the swith with the headlight dimmers on it.

You just need to remove the steering column bezels and replace the multifunction switch.

Posted on Aug 29, 2008

  • 1 Answer

SOURCE: Removing Headlight assembly

There is a small hex headed fastener behind the headlight, oriented vertically. Loosen this and remove it, it is long and passes through the body of the light housing to threads below. You then pull the headlight housing forward, its still held in place by several friction fasteners so it may take a little force but it will "pop" off and then when you're through you'll have to "pop" in back in.

Posted on Jan 13, 2009

polarcycle
  • 1392 Answers

SOURCE: 2007 Forrester - headlight bulb good but not lighting

You will need to look at the plug for the headlight. If it looks good, I would look for the headlight low beam fuse.

Posted on Mar 06, 2009

  • 383 Answers

SOURCE: 2001 subaru outback headlight not working

chapmnfarm: your head lights use a "2" fuse system.
one for the left and one for the right.
The fuse box you are looking for is under the hood on the passenger's side. It is a black box roughly 8 inches long and 4-5 inches wide. When you remove the cover, you will see fuses and relays. What you are looking for is the section in the box which has a cluster of 7 fuses. 3 in one row and 4 in the other. On the outer parameter are two relays. The fuses you are interested in are located in the row of 4 fuses, with the two closest to the "L" shaped part of the box. Both of those should be 15 amp fuses.
The fuse below those should be a 20 amp which is the lighting switch and the one below it is a 15 amp which is for the interior lights and the clock.
Check your harness grounds in the engine compartment near the area you have the problem. There are ground wires which come out of the harness on both sides of the core support. The wires are black in color and have "EYES" crimped onto the ends of the wires. Both of them will probably be located about 4-6 inches below the upper tie bar on each side of the radiator. Odds are that the eyes will be large enough to pass a 6mm bolt through.
I hope what I have given you will resolve your problem. Lem me know,,good luck>>>>>>>>>>>>>>>

Posted on Apr 19, 2009

  • 1 Answer

SOURCE: changing bulb for front headlight assembly on

how to change a light bulb in the headlamp linkoln MKX

Posted on Nov 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights not working


The new headlights, probably blew the fuse check the fuse and relay if so get a bigger fuse to run the new headlights. Remember when replacing any light in your vehicle to not touch the glass part of the bulb with your bare fingers..

Jun 21, 2013 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

Headlights blink when i put my blinker on


Look for a bad ground to the headlights.The ground probably feeds all of the front lights,and when you are using the headlights,they are seeking a ground through the turn bulbs.When you apply 12v to the turn bulbs,it is reversing this affect(the turn bulbs are seeking a ground through the headlights).

Dec 30, 2012 | 1997 Toyota RAV4

1 Answer

Lights will not turn on


HEADLIGHTS NOT WORKING


It can be faulty headlight switch or issue with its wiring. Or its faulty head light fuse.


==========

To troubleshoot the issue i suggest you few help links with appropriate solution. So you can follow the test and confirm what exact problem is there in your case of headlights not working:-----

Click the link below: -----


All headlights not working?

http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------

Working of Headlight switch?
------------
Both headlight bulbs blow together?

------------
Car headlight bulbs don't last long?

---------------

2007 Dodge Caliber: Low Beam Headlight Not working

http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html

----------

2003 Toyota Camry: Headlights Work Intermittently?

http://technoanswers.blogspot.in/2012/04/2003-toyota-camry-headlights-work.html

----------

Chevy Tahoe: Low Beam Lamps are not working?

http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html

----------

2001 Chevrolet Tahoe: Headlights not coming ON?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-headlights-not.html

--------

2004 Dodge Ram: High Beam Light is DIM?

http://technoanswers.blogspot.in/2012/04/2004-dodge-ram-high-beam-light-is-dim.html

----------

2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html

------------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

---------
How to Replace a Headlight

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb


http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html


How to Replace a Park Light Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------

Headlight Assembly Removal On Honda Accord

http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html

---------------

Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html

-----------

How to Replace a Headlight Door

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

----------

How to replace HID headlight bulbs for lexus 400h?

http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------------

These will help.

Thanks.

Nov 28, 2012 | 1986 GMC K1500

2 Answers

How do I get to the front headlight to change it


Re: Replace headlight bulb

  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
BMW e46 HID Headlight Replace
get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-0.jpg

get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 22, 2012 | Cars & Trucks

1 Answer

How to remove,replace,front right headlight, 200' rav-4 ?


Headlight bulbs are easily replaced. At the back of the headlight assembly, under the hood, find the electrical connector and turn it counterclockwise a quarter turn, then pull out the connector and attached bulb. Remove the old bulb, and replace with your new bulb. Do not touch the glass part of bulb with your hands or fingertips- it will shorten bulb life. Put the new bulb back into place and turn it clockwise to secure it..

Nov 14, 2012 | 2000 Toyota RAV4

1 Answer

How to change the bulb in 1999 RAV-4


Instructions
    • Open the RAV4's hood and locate the headlight bulbs plugging into the rear of the headlight assemblies. Each assembly has two bulbs, one outer and one inner. Unplug the wiring harness from the rear of the burnt-out headlight, by pressing the locking button and pulling down on the harness.
    • 2Grab the rear of the bulb and rotate the bulb about a quarter turn counterclockwise to unlock it. Pull the bulb from the headlight assembly.
      3
    • Grab a new 9005 (high beam) or 9006 (low beam) bulb by its plastic base. Insert the bulb in the rear of the headlight assembly, lining up the tabs on the bulb with the notches in the headlight assembly, and twist it clockwise to lock the bulb in place. Do not touch the glass part of the headlight bulb, as the oils from your hands can cause the bulb to fail prematurely.
    • 4Plug the wiring harness into the receptacle on the rear of the bulb

Jun 27, 2012 | 1999 Toyota RAV4

1 Answer

How to remove front headlight assembly


Hi,

1 Open the RAV4's hood. Locate the back of the headlight assembly, just behind the headlight. You should see a ring-shaped plastic cover.

  • 2 Turn the locking plastic ring clockwise about 1/2 inch and it should pop off.
  • 3 Remove the rubber grommet covering back of the headlight. Simply pull it out of the headlight assembly.
  • 4 Depress the spring latch holding the bulb in place behind the headlight. This is a wire latch that looks somewhat like a bent paper clip. Press it down and move it to the side, away from the light bulb. It should come free and flip open, freeing the bulb.
  • 5 Disconnect the light bulb from the plug. Replace it with the new light bulb, and replace the latch and rubber grommet. Replace the plastic ring cover and turn your headlights on to ensure proper installation.

  • Thanks

    Aug 07, 2011 | 2003 Toyota RAV4

    1 Answer

    Need to change left front turn single whole ***. come out?


    1. Go to the front of the car and open the hood. Locate the two screws that mount the headlight assembly to the front of the vehicle. The screws are on top of the assembly at both ends. Use a Phillips head screwdriver to remove the screws. Pull the headlight assembly straight off of the Intrepid.
    2. Locate the turn signal electrical connector at the outer side of the headlight assembly. There is a thick wire coming out of it. Turn the electrical bulb socket counterclockwise to take it out of the headlight assembly.
    3. Pull the turn signal bulb straight out of the electrical socket.
    4. Push in a new turn signal bulb. Reinstall the electrical socket with the new bulb in it to the headlight assembly. Turn the socket clockwise until it is tight. Push the headlight assembly back in place on the car and use and screwdriver to put the mounting screws back in.

    Nov 18, 2009 | 2002 Dodge Intrepid

    1 Answer

    2006 toyota rav 4 fog light bulb replacement


    fIRST YOU SEE A RUBBER GASKET SURROUNDING THE HEADLIGHT PLUG IN THE BACK OF THE HEADLIGHT ASSEMBLY. pULL OFF THE GASKET AND LET IT HANG ON THE SURROUN DING HEADLIGHT WIRES. tHEN PULL OFF THE HEADLIGHT WIRE HARNESS BY GRABBING THE SOCKET (NOT THE WIRES). AROUND THE BULB IS A THIN SILVER HOLDING SPRING THAT LOOSENS BY SQUEEZING THE ENDS TOGETHER AND ROTATING IT. iT WILL LOOSEN AROUND THE HEADLIGHT. WHEN THIS HAPPENS THE HEADLIGHT WILL "FLOP" AROUND AND PULL IT OUT, REMEMBERING TO SEE HOW THE THREE CONNECTORS ARE LOCATED (I.E - IS ONE CONNECTOR AT 12 O CLOCK POSITION AND THE OTHER TWO ARE AT 9 AND 3 OR ARE THEY AT 3,6 AND 9, ETC.). rE-ASSEMBLY IS THE OPPOSITIE. tHE TRICK IS TO GET THE THIN SPRING WIRE BACK IN PLACE. YOU HAVE TO SQUEEZE THE SPRING AND RE-POSITION IT SO IT KEEPS THE BULB SECURLY IN PLACE

    Having just changed the bulb, I would advise taking the whole headlight assembly out first. It is near impossible to feel or imagine how to change the bulb without seeing it. First, use a phillips screwdriver to take the single screw holding the strip off just below the headlight assembly. By doing so, you will now see the other two bottom bolts holding the headlight in. Take all four bolts out then disconnect the bulb from behind. Then proceed as above.

    Jun 14, 2009 | 2006 Toyota RAV4

    3 Answers

    Cant figure how to get to bulb


    There are 2 pins and 2 bolts that hold in the head lamp. Remove the head lamp to access the signal bulb. Good Luck

    May 31, 2009 | 2007 Chevrolet Uplander LS Minivan

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    21 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8201 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...