Question about GMC Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Try diconnecting the battery for a minute or so, then reconnect it. the computer should reset itself, and hopefully the light will go out.
Posted on Aug 22, 2008
SOURCE: 2000 GMC Safari anti-lock brakes
There was actually a recall for this. Go to your local GMdealer and have them check your VIN for a recall. If not under recall get out of there its easy to repair yourself don't let'em fool you.Remove the front pads caliper and rotors. Locate the abs sensor mounted to the wheelbearing assembly by a small socket head cap screw (Allen wrench). Removethe bolt and softly gently/wiggle the abs sensor around until it pops upout of the hole. some will break, which is why it wouldbe nice if the recall applies to your vehicle that way if they break gm replaces. Once you get both sides removed, clean themounting surface of all rust or build up with w-d 40 and small steel toothbrush then wipe off excess with clean rag and mild soap and warm water, dry completely make sure no spray residue exist on parts, Next apply a thin layer of lubricant grease to preventfuture rusting and reassemble.The rust build up under the sensor is causing the angle to change resultingin inaccurate wheel speed readings in the abs module your abs module will interprets this asa wheel is either slipping or skidding and applies your abs. This should make you happy with no more irritations. Please rate me. If you need further assistance you can always ask me. Good luck with this.
Posted on Apr 25, 2009
Have the ABS Distribution Unit/Computer checked at the dealer.
NOTE: ABS Unit located under the vehicle, under the drivers seat. Listen to it with the vehicle running with no brake on... if you hear ABS motor running continuously, unplug ABS fuse in fuse block under hood to turn ABS motor off and be able to use vehicle in the meantime whether you decide to get the ABS fixed or not.. This will not affect brake operation, but will disable ABS feature. ABS and Brake idiot lights will remain on. No way to turn them off short of having the correct repair done. ABS Distribution Unit/Computer is very expensive part and requires expensive labour for replacement.
Posted on Jul 25, 2010
Tips for a great answer:
Aug 26, 2014 | 2000 GMC Safari
Oct 15, 2012 | Cars & Trucks
May 23, 2017 | 1997 GMC Safari
May 31, 2010 | 2003 GMC Safari
May 30, 2010 | 1994 GMC Jimmy
Jan 25, 2010 | 1995 GMC Safari
Jun 27, 2009 | 2005 Chevrolet Equinox
Apr 25, 2009 | 2000 GMC Safari
Jan 16, 2009 | 2000 GMC Safari
32 people viewed this question
Usually answered in minutes!