Question about Cars & Trucks
When Horn chirp is enabled, the vehicle horn will chirp on locking and unlocking the vehicle, to enable or disable the horn chirp:
1. Turn headlight switch "OFF"
2. Cycle the ignition switch from "LOCK" to "ON" three times (within 5 seconds) leaving it "ON"
3. The vehicle security indicator will illuminate continuously for 5 seconds
4. During the time the indicator is illuminated, operate the horn(for 1 second). The turn signals will flash once to confirm successful programming.
5. Turn ignition switch to "LOCK" and test system with the remote controls.
To disable horn chirp, repeat the procedure for enabling.
The user manual actually declares customizations of the smartkey must be done by the dealers using special equipment. However, the above procedure works on a variety of years and models. And I see no where in the user manual that refers to the horn and door lock even being a customizable setting.
Posted on Aug 10, 2017
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The filter is under the engine. It is not a traditional "spin-on" oil filter. The filter is now a "cartridge-type", and is in an aluminum housing.
Posted on Jul 18, 2009
SOURCE: location of oil filter in
First of all you will need to purchase the paper filter that also comes complete with a small plastic tool. Drain the engine oil as normal until all of the engine oil has drained and put back and tighten the drain plug.Underneath the engine you will see an aluminum housing that has a nut on the very bottom of it and above that a place to fit a large socket wrench ( About 2 inches in diameter) you can purchase this socket at a discount car parts shop. this socket has a 1/2 inch attachment for a socket wrench. First remove the very bottom plug and only a little engine oil will drain as in order to get the rest of the engine oil out you will need that small plastic device that comes with the new oil filter. this plastic tool is what opens up a valve inthe oil filter body to let the rest of the engine oil out of the canister. After all the oil has been removed then use the oil filter canister tool to remove the aluminum body from the engine. With the removal of the body the replacable filter will be inside of the body as it is released from the engine. Note that there will also be 2 o-rings that are part of the filter kit. the large o-ring will be the replacement for the one that is around the thread area on the aluminum bodyn ( To seal the canister to the engine ). The second one is for the small plug that you removed first. After that you will need to refill th engine oil to the correct level. Dont forget to only use SYNTHETIC OIL.
Posted on Oct 20, 2010
SOURCE: I have 98 Camry Le
if you use the keyless entry to unlock the vehicle & don't open a door within 30 secs.the vehicle will automatically lock & the alarm will reset,if you unlock it with the key this shouldn't happen.....cheers.
Posted on Sep 01, 2011
You can sometimes have the "vin" number and o to the dealer and they will make one for you. Some lock smiths will do it, but you will need your title with you.
Posted on Nov 12, 2012
Tips for a great answer:
Nov 18, 2016 | Toyota Cars & Trucks
Sep 08, 2016 | 2010 Toyota Camry
Apr 10, 2013 | 2010 Toyota Camry LE
Jan 15, 2013 | 2010 Toyota Camry LE
Sep 08, 2011 | 2004 Toyota Camry
Sep 01, 2011 | 1998 Toyota Camry
Jan 08, 2010 | 2004 Toyota Camry
53 people viewed this question
Usually answered in minutes!