Question about Suzuki Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Suzuki swift Headlight problem
Have you checked to see if this is a wiring problem or maybe a relay problem?
Recently my lights would work on side lights and not anything else and this was down to dodgy wiring and needed a new relay unit.
Posted on Jul 28, 2008
I had this happen to me. It does come out just like the owners manual says but what it doesn't tell you is how hard it is for the assembly to come out. I thought I was going to brake it before it popped out, but I was so mad I didn't care anymore. I had dirt and grime binding in the assembly. Once I had it out I cleaned it up and it went back into place with out any problems.
Posted on Feb 25, 2009
SOURCE: how do i adjust my
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
Posted on Nov 19, 2009
I assume then that this is a v6. Bank one should be the drivers side (I think) . Sensor 1 would be the one before the catalytc convertor and sensor 2 would be the one after it.
Posted on Mar 11, 2010
Tips for a great answer:
Oct 29, 2017 | Suzuki Cars & Trucks
Feb 02, 2015 | 2008 Suzuki XL7
Jun 17, 2014 | 2008 Suzuki XL7
Oct 29, 2012 | 2007 Suzuki XL-7
Jul 19, 2011 | 2007 Suzuki XL-7
Feb 17, 2010 | 2001 Suzuki Xl 7
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: