Question about Chrysler Cars & Trucks
Power Door Harness Are all broken apart
You will need to remove the fuse for the power side doors and back. Disconnect the battery to reset the ECU and the doors should open and close manually just fine. There is a safety release on the gas filler port to prevent the door on that side from opening with the port is opened. Make sure the fuel filler cap door works properly, if the sliding door on that side is the one that won't open.
Posted on Aug 19, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
your door panel can come off and you can access internal door locking mechanism from inside car first inspect to see all rods are hooked into plastic sleeves then make sure lock is disengaged by pulling rod towards rear of van it should then be able to be opened easily if not your locking mechanism is frozen inside of door between a pillar and door it will have to be pushed to open from inside of door panel once you do that door will open if you cant make lock work manually once this is done replace locking mechanism or rods accordingly.
Posted on Feb 04, 2009
Take a look at end of door where latch is & post where the 2 meet when closed. Look for round metal button/contacts, about 1/2" in diameter. If you look close, they should line up to make contact with each other when door is closed. Take some fine steel wool (preferred) or fine sandpaper and scuff them up until you see metal is clean on both surfaces. Now try it, and let me know what happens.
Posted on Mar 09, 2009
Not sure if they are same on 2006 but there should be a couple of small rounded metal contacts, or similar, on door that meet with door post to complete the connection. When you find them, clean them off with a little fine steel wool or SOS pad, minus the soap, and see if that doesn't cure it.
Posted on May 18, 2009
Tips for a great answer:
Mar 09, 2015 | 2001 Chrysler Town & Country
Jul 20, 2011 | 2002 Chrysler Town & Country
Jan 24, 2010 | 2001 Chrysler Town & Country
Dec 31, 2009 | 2002 Chrysler Town & Country
Mar 18, 2009 | 2006 Chrysler Town & Country
Mar 06, 2009 | 2003 Chrysler Town & Country
Nov 12, 2008 | 2006 Chrysler Town & Country
Jul 15, 2008 | 2005 Chrysler Town & Country
Jun 23, 2008 | 1994 Chrysler Town & Country
21 people viewed this question
Usually answered in minutes!