Question about Ford Cars & Trucks

Open Question

I have a 1993 ford tarus and what is the purpose for the integraTed control module that is at the front of the engine compartment on the top radiator support. What does it control?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

adhamsaid88
  • 58 Answers

SOURCE: 1998 Dodge Dakota engine compartment/chassis assembly dwgs.

hello , you could take a look at our products section , our look at the related links , thank you for using fixya.

Posted on Jun 26, 2008

harley9701ha
  • 424 Answers

SOURCE: cant find the radiator fan switch on my 1993 ford tempo

Check the sensor near the thermostat housing.

Posted on May 29, 2009

  • 1757 Answers

SOURCE: i need a diagram for a 1993 ford tarus fan belt

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...
http://www.2carpros.com/car_repair_information/year/1993/make/ford/model/escort/1993_ford_escort_drive_belt_routing_diagram.htm

Posted on Mar 07, 2010

ZJLimited
  • 17970 Answers

SOURCE: I HAVE A 1993 FORD RANGER 3.0 V6 ENGINE AND NEED

For 1993 Ford Truck Ranger 4WD 3.0L MFI 6cyl the Control Module-Ignition is located under hood, center, rear engine area, mounted on distributor.

f2a2c92.jpg

Fig. 1: View of the remote mounted Ignition Control Module (ICM)

Hope this help (remember comment and rated this).

Posted on Jul 27, 2010

BCAS1298
  • 3092 Answers

SOURCE: can't find the body control

Front seat area, driver side, under dash, mounted on fire wall dash bracket.

Posted on Aug 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 cadilac seville occasionally doesnt respond when ignition key is inserted, no memory position adjustments, no starter when key turned. is it key or ignition switch. everything usually works fine


Is the security light lit on the instrument when it doesn't start ? The ignition switch on your vehicle doesn't work like you would probably think it does . The ignition switch is input signal to the body control system .
Body Control System Description
The body control system consists of three modules and their associated electrical controls. These modules are as follows:
• The dash integration module (DIM), located on the right hand side of the instrument panel, near the blower motor.
• The instrument panel integration module (IPM), located in the center of the instrument panel, above the radio.
• The rear integration module (RIM), located on the right hand rear of the passenger compartment, behind the rear seat.
Each module integrates input and output controls for two or more functional areas. The inputs and outputs are wired to the closest module to minimize the lenth and amount of the wiring used. All three modules communicate on the Class 2 serial data line, allowing data to be shared among them, as well as with other Class 2 modules on the vehicle as needed.

Each of the three body control modules integrate a number of functional systems under the control of a single module. Each of the modules are connected to the Class 2 serial data line.
Dash Integration Module (DIM)
The dash intergration module (DIM) functions include the following:
• Power moding control (ignition switch states) over Class 2 serial data line
• Control of exterior lamps
• Interior lamps and incandescent dimming
• Steering wheel controls
• Horn relay control for theft activation
• Low side temperature for HVAC compressor
• Hood ajar switch input (export)
• Storage of the clock settings and, sending a message on the class 2 serial data line in response to requests from other modules.

Instrument Panel Integration Module (IPM)
The instrument panel integration module (IPM) functions include the following:
• Front HVAC air delivery and temperature controls
• Ambient light sensor input and twilight delay input for headlights control
• Foglight switch inputs
• I/P dimmer switch input
• Traction control switch input
• Interior lamps switch input
• Key in ignition switch input from the ignition switch
• Fuel door and rear compartment lid release switch input
• Ignition switch headlight control

Rear Integration Module (RIM)
The rear integration module (RIM) functions include the following:
• Fuel level sensor input
• Heated seat controls
• HVAC blower control
• Rear defogger control
• Park brake relay controls
• Various controls for the interior lamps
• Reverse control for the backup lamps and automatic day/night mirror
• Rear foglights control
• Fuel door and rear compartment lid release controls
• Retained accessory power (RAP) control for the sunroof control module
• Ajar switch and tamper switch inputs from the rear compartment lid
• Content theft alarm

At the dealer we would hook up a scan tool and look at the ignition switch inputs to the DIM to see if has correct inputs . Also we would check DTC'S diagnostic trouble codes .
DTC B1805 Ignition Switch Problem

Normal vehicle Class 2 communication does not begin until the system power mode has been identified. The dash integration module (DIM) monitors four discrete wires from the ignition switch contacts in order to determine the present power mode (ignition switch position). The DIM communicates the system power mode to all Class 2 modules on the Class 2 serial data line.
http://www.public.asu.edu/~pheanis/documents/VBI_CLASS2.pd

Jan 12, 2017 | 2000 Cadillac Seville

1 Answer

Where is my fuel pump relay switch located on my 1994 ford thunderbird?


The Integrated Relay Control Module is located at the RH (passenger side) front of the engine compartment, mounted to the upper radiator support. It controls both power to the PCM (computer) as well as the cooling fans and fuel pump.

Aug 20, 2014 | Cars & Trucks

1 Answer

I cannot find the fuel pump relay in my 1997 Ford Escort LX, Please help.


The fuel pump relay on your vehicle is an integrated part of the Constsnt Control Relay Module (CCRM). It is located in the driver's side front of the engine compartment. You must remove the air cleaner box to get to it.

Oct 25, 2011 | 1997 Ford Escort

2 Answers

Locate the ICM on a 95 bronco 5.8L (ignition control module)


On 1995 Ford Truck Bronco 5.8L EFI 8cyl the Control Module-Ignition is located under hood, center, upper engine area, front of intake manifold, mounted on front side of distributor.

zjlimited_1625.jpg

Fig. 1: A TFI-IV ignition module



Hope this helps (remember to rate and comment this free answer).

Jul 26, 2011 | 1993 Ford Bronco

1 Answer

Where is the fuel pump relay for a 1993 ford tempo 2.3L. I REPLACED THE FUEL PUMP TODAY AND WHEN I DRIVE 5-18 MIN. THE FUEL PUMP SHUTS DOWN AND THE CAR DIES. AFTER IT SETS THE PUMP WILL KICK BACK ON AND IT...


Hi :) The fuel pump relay is an integral part of the body control module it also houses the Fan relay this module is about 6"x4"x2" and has gobs of wires coming out of it, the module is mounted on a bracket under the hood that is bolted to the top of the driver's side front strut.

Mar 17, 2011 | 1993 Ford Tempo

2 Answers

1993 ford tarus 3.0 engine had weak spark after changed coil fired a couple of times know no spark? any ideas


Using a volt meter disconnect the electrical plug to coil and check with key on to be sure there is at least 12 volt to coils. if not or voltage is low the ignition switch may be bad, have an assistant jiggle the key in ignition while you are looking at the meter to note voltage fluctuations if any are noted ign. switch is bad also check all fuses under dash as wellas in engine compartment.

Oct 29, 2010 | 1993 Ford Taurus

1 Answer

I HAVE A 1993 FORD RANGER 3.0 V6 ENGINE AND NEED


For 1993 Ford Truck Ranger 4WD 3.0L MFI 6cyl the Control Module-Ignition is located under hood, center, rear engine area, mounted on distributor.

f2a2c92.jpg

Fig. 1: View of the remote mounted Ignition Control Module (ICM)

Hope this help (remember comment and rated this).

Jul 27, 2010 | 1993 Ford Ranger SuperCab

1 Answer

Theres no sprk replaced coil,distributer cap and rotor


i would say module but havent a clue where it be ,never seen one of these cars before here in spain ,module could be inside distributor or under the coil or mounted somewhere else around the engine compartment

Jun 29, 2009 | 1995 Ford Taurus

1 Answer

Relay Box for 1994 ford mustang cobra


relays are normally in the fuse panel on the left side of dash by knee.

Fuses and Circuit Breakers Location and Values
NOTE: The headlamp switch (11654) has an integral 20-amp circuit breaker.
  • The combination instrument panel fuse and circuit breaker panel contains most of the fuses and circuit breakers used in the system.
  • The fuses and circuit breakers are color-coded by amp rating.
  • The locations and values of the fuses and circuit breakers not contained in the panels are shown in the following chart.


Circuit Circuit Protection and Rating Location Headlamps and High Beam Indicator 20 Amp. CB Integral with Lighting Switch Heated Back Window 16 GA Fuse Link Engine Compartment Power Windows, Power Seat, Power Door Locks 20 Amp. CB Starter Motor Relay Load Circuit Fuse Link In Harness Engine Compartment Lamp Fuse Link In Harness Convertible Top 25 Amp. CB Lower Instrument Panel-Reinforcement


732ccd2.gif
Cavity Number Fuse Rating Color Circuit Protected A 40 Amp Orange
  • Ignition Switch
B 40 Amp Orange
  • Ignition Switch
C 40 Amp Orange
  • Ignition Switch
D 50 Amp Red
  • Headlamp Switch
  • Instrument Panel Fuses 4, 8 and 16
  • Instrument Panel Circuit Breaker 12
E 20 Amp Light Green
  • PCM
  • Fuel Pump
  • HO2S (3.8L)
  • Canister Purge Solenoid
  • EVR Solenoid
  • Ignition Control Module (3.8L)
  • IAC Solenoid
  • Fuel Injector
  • Automatic Transmission
  • Camshaft Position Sensor (3.8L)
  • MAF Sensor
F 40 Amp Orange
  • Heated Back Window
G 20 Amp Yellow
  • Fuel Pump
H 60 Amp Blue
  • Fan Control
J — — Not Used K 10 Amp Blue
  • Anti-Lock Brake Control Module
L 20 Amp Red
  • Fan Control Monitor (PCM)
M 25 Amp Yellow
  • Horn
  • Foglamps
  • Daytime Running Lights Control Module
N 25 Amp Clear
  • Fuses 5 and 9
P 20 Amp Clear
  • Radio Amplifier
Q 20 Amp Yellow
  • Generator
S 30 Amp Yellow
  • Convertible Top Motor
T 60 Amp —
  • ABS

May 14, 2009 | 1994 Ford Mustang

1 Answer

Where is the ignition module located on the 1996 ford contour?


tragik nc: In looking this car up in both the 4 and 6 cyl configurations, Ford said that the ignition control module is no longer a separate component. It is actually integrated into the PCM (power control module)
This is located in the right rear corner of the engine compartment behind the power steering reservoir.
Good Luck, mybunkey>>>>>>>>>>>>>>>>>

Apr 20, 2009 | 1996 Ford Contour

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...