Question about Cars & Trucks

Open Question

I have a 55 workmaster and it wil state sometimes and sometimes it won't I was told it may need a fuel control module I got ont but cannot locate wher it is could you tell me where it is located

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: Need to replace Electronic Control Module (ECM)

The ECM is located under the dash, on the passenger side.
It is a silver box with 4 plug-in wiring harnesses, rioughly 8" x 5"x 2"
It may help if you remove the glove box door, in order to see it.
Hope this helps.

Posted on Nov 13, 2008

Ad
  • 1 Answer

SOURCE: ignition control module location for 1997 ford thunderbird?

1997 Ford Thunderbird Transmission problem
When driving normally transmission surges like it is not in gear. Had sensors replaced, nitural safety switch, and still acts up.

Posted on Dec 18, 2008

  • 234 Answers

SOURCE: location for the head light control module

The LCM or lighting control module is located under the dash to the right of the steering wheel, first you need to remove the hush panel under the knee brace, then there are 2 screws the hold it to a bracket. Unplug the 4 connectors towards the back and then slide it out and replace.

Posted on Oct 22, 2009

pippall
  • 1486 Answers

SOURCE: 2001 VW beetle ignition control module location?

The coil pack

Posted on Nov 29, 2009

Testimonial: "Thank you"

SOURCE: 1996 Camaro: body control module location...

Behind the right side of the glove box

Posted on May 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Malfunction indicator lamp lit on 2013 chevy equinox. immediately engine stalled. was told it is the fuel pump.Where is fuel relay switch located to rule out a fuse problem b4 I change fuel pump


Your vehicle does not have relay switch ! Fuel pump controlled by a fuel pump driver control module . ( computer ) Who ever told you that it needed a fuel is probably wrong !

Malfunction indicator lamp lit ??????? What code ?

Mar 20, 2017 | Cars & Trucks

1 Answer

I need help locating a module ignition modulator in a 2003 Chevy Tahoe


Who told you that one ? Module ignition modulator 2003 Chevy Tahoe ! No such thing! Your best bet would be to take your vehicle to a qualified repair shop .
The electronic ignition (EI) system is responsible for producing and controlling a high energy secondary spark. This spark is used to ignite the compressed air/fuel mixture at precisely the correct time. This provides optimal performance, fuel economy, and control of exhaust emissions. This ignition system consists of a separate ignition coil connected to each spark plug by a short secondary wire. The driver modules within each coil assembly are commanded ON/OFF by the powertrain control module (PCM). The PCM primarily uses engine speed and position information from the crankshaft and camshaft position (CMP) sensors to control the sequence, dwell, and timing of the spark.

Aug 09, 2016 | Cars & Trucks

1 Answer

A 1998 gmc Sierra driving down road at 60 and it just died replaced ignition module and in line fuel filter and now It won't even try's to start


Have you checked the fuel pressure? I think that the fuel pressure is between 55 or 60 pounds. They won't run under 52 pounds.

Mar 30, 2013 | Cars & Trucks

1 Answer

Have 87 jeep comanche, have been told it has a cam shaft sensor, to keep it in time , if so where is it located? the engine is a 4.0


The cam sensor is located in the distributor.check the cylinder compression, check for ignition spark, check for fuel injector pulse and fuel pressure.

Aug 06, 2012 | 1987 Jeep Comanche

1 Answer

Need to know why a 97 mercury cougar won't start until cooling fan and fuel pump stop running


I would think it's a problem with (CCRM) constant control relay module . This module has relay's inside that control the fuel pump , cooling fans , A/C compressor clutch , PCM - engine computer power relay . And thier are electronics involved , solid state circuity . Google CCRM
found this helpful answer from mercury mechanic on JustAnswer com

May 07, 2017 | 1997 Mercury Cougar XR7

1 Answer

Sometimes my windshield wipers work and sometimes they won't on my 1994 chevy lumina van. I tried bypassing the switch but It won't do anything. What is the problem?


This is a common GM problem. The issue lies in the control module which is the black cover on the driver's side of the firewall under the hood. The replacement kit for these run between $35 and $55 depending on where you purchase them. the remanufactured units are just as good. They come with 3 new Torx head screws, the circuit/relay board, di electric grease for the connector and a new cover. Takes about 3 minutes to change. A1 Cardone 81158PB Remanufactured Wiper Motor Pulse Board Module

May 15, 2011 | Chevrolet Lumina APV Cars & Trucks

1 Answer

I am told my 1992 Mercury Sable now needs another part: Integrated Control Relay Module. How much does this part cost? What more can I say? The car has been giving me a lot of trouble. First it need...


before i changed that i would change the fuel filter it sounds like this is your problem and there tryin to upsale you this fuel filter like 20 bucks takes about a hour to do very easy hope this helps when filter gets clogged particles float around in filter and randomly block flow hole hope this helps

Sep 12, 2010 | 1992 Mercury Sable

2 Answers

Key cycle check codes 12, 43, and 55 can anyone tell me what these are?


HI. The 12 code is a basic code that will be issued, when the battery is changed, or disconnected for a short time. This Will clear, after the car has been driven over a period of three days with a consistent flow of electricity through the engine CPU.

The 43 code is the result of a Peak primary coil current not achieved with max dwell time, or a cylinder misfire. This will, generally, be the result of a failed coil, or distributor cap(if equipped). Check the ignition control module for faults, if the vehicle is not equipped with a distributor assembly. Inspect the wires and plugs for ware, as well. This code doesn't specify the actual location , and which cylinder is misfiring, so check all coils, and plug/wires.

This 55 code is not an issue. This is just a place holder number, stating that the code read out has ended. This code dose not represent a fault. 55 = end of codes.

Dec 18, 2009 | 1996 Dodge Intrepid

1 Answer

Changing the fuel filter


Solve The body control module on this vehicle controls the gauges, radio, door locks, windows and wipers.... (More) The body control module on this vehicle controls the gauges, radio, door locks, windows and wipers. When this module goes out all sorts of crazy things happen to the car. The module is located inside the car behind the fuse panel. I have had this module go out on three caravans and it is very expensive to replace. Chrysler is aware of this problem. A mechanic told me that they were going to issue a recall but it did not impose a serious enough safety threat. _SetupBidi('source'); The fuel filter is on top of the fuel tank is visible and brings with her 3 hose couplings

Aug 15, 2009 | 1997 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...