Question about Saturn Cars & Trucks

Open Question

What is the small hose on a 02 saturn sl2 throttlebody and where does it go

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 31 Answers

SOURCE: Rough Shifting in Automatic Saturn 02

change the fluid in your tranny, start looking for a different car. my advice: get a toyota

Posted on May 06, 2009

  • 382 Answers

SOURCE: ran out of gas in a saturn sl2 02

fill it up and hope you did not clog your fuel pump

Posted on Dec 15, 2009

  • 4536 Answers

SOURCE: '02 Saturn SL2 twin cam. Turns over but won't

is the batt fully charged-may need to titen cable connects--may be failen batt or alternator--isit gitten fuel--get car scanned from mobile tech

Posted on Aug 11, 2010

  • 76 Answers

SOURCE: do i have to drop

If there is no access port in the trunk floor then you must drop the tank. Dealing with gass is very dangerous . Please have the proper extinguisher and you should have an intringically safe trouble light.

Posted on Dec 26, 2010

  • 154 Answers

SOURCE: I need the fuel filler neck and connecting hose

yes call any general motors dealer they can get the parts

Posted on Feb 27, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2002 Saturn SL2 series how do I replace the connector on the back of the motor where the small hose runs from the antifreeze resivoir to the back of the motor and what is that called ?

are you talking about the metal tube that carries antifreeze? If so, there are 4 nuts to remove and unclamp the hose from each end, small hose for resivoir and replace the opposite way

Oct 12, 2014 | 2002 Saturn Sl

1 Answer


saturn shifter bushing repair kit. sold at parts stores and eBay for about 20 bucks

Apr 26, 2011 | 1993 Saturn SL2

1 Answer

I have a 1994 Saturn SL2 and I am leaking antifreeze from one of my hoses and can't find which hose it is since Antifreeze is all over the engine battery etc. Can anyone provide a hose diagram for this...

there are only two hoses. buy replacements for both, less than 20 bucks, and some new hose clamps.
though there is only one way they can go on, take a "before" picture with the camera in your cell phone, then take the hoses off and put on the new ones. tighten the hoses and your hose leak problem is fixed. if there is an coolant left in the system, drain it out the petcock on the bottom of the radiator.

Dec 28, 2010 | 1993 Saturn SL2

4 Answers

Does the intake manifold from a 2001 Saturn SL2 fit a 2002 model

If you are trying to replace the intake manifold due to a crack in the plastic check out a great option in repairing it.

Feb 07, 2010 | 2002 Saturn S-Series

1 Answer

1992 Saturn SL2 stalls after running about 5 minutes

my only guess is a vacuum hose leak. possibly a loose air filter housing, or the mass air flow sensor. look for any hoses unplugged. if nothing is noticed, try cleaning out your fuel system. if that doesnt solve it, then it would be something an experienced mechanic would have to come and examine it personally.

Jan 01, 2010 | 1992 Saturn SL2

1 Answer

93 saturn sl2 when given the gas it want pick up speed

Do a back presure check by taking the 02 sensor out and placing a vacuum gage there to see how much back pressure it has. It maybe that the catylatic convertor is clocked...which could mean engine problems.

Oct 28, 2009 | 1993 Saturn SL2

1 Answer

Cant find temp sensor on 1992 saturn sl2 need to change

On the SL2 (DOHC), there are two coolant temperature sensors located on the left-hand side of the cylinder head, near the upper coolant hose. On the SL2, the upper sensor with ONE WIRE controls the temperature gauge in the dash. The lower sensor with TWO wires provides input to the computer. They are not interchangeable. Here is a tip you will need a 14mm deep socket or box wrench. The new sensor may require a 13mm socket or wrench, depending on the manufacturer. Good luck and hope this helps. Keep me posted.

Jul 12, 2009 | 1992 Saturn SL2

1 Answer

How to replace coolant heat sensor on 1998 saturn

the coolant temp sensor is located on the right side of the cyl head its small under by the upper rad hose 13mm socket removes it after u take the small connector of,make sure the car is cold coolant will come out when u remove it,,,,check the connector too for corrosion,by only saturn sensor the cheap autozone and aftermarket ones dont read right and give you the same problem as the old bad one

Jun 18, 2009 | 1999 Saturn SL

1 Answer

Rough Shifting in Automatic Saturn 02

change the fluid in your tranny, start looking for a different car. my advice: get a toyota

May 01, 2009 | 2002 Saturn Sl

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides