Question about 1995 Audi A6

2 Answers

Hello, Yesterday, appeared à picture on the instrument panel for checking. The configuration of this alert is a big "O" with around tree "_" at left and the same symmetrical at right. I had a look this morning under the Audi and it seems there is la leak about a front shock absorber. Is it to presume this 2 events have link like "effect and cause"? Thanks in advance. (References of my car in French: Ordonnancement : 1526 25-3-2350 198-79 Identification du véhicule: WAUZZZ4AZSN118192 Type :4A5 OYC Explication du type A6 AVANT TDI R5 2.5 Mise en circulation 27/6/1995 (AU55 dit Oscaro ) Puissance du moteur: 103 kw (= 140 CV) EGII M65 Moteur: AEL boite de vitesse: -------ARX Peinture LZ1T/LZ1T équipement intérieur : NOK/CK 6 vitesses, 5 cylindres; 2,5 litres de cylindrée)

Posted by on

  • fanon_eric Jul 27, 2009

    I'm French and try to explain in English.
    The alert picture (in yellow) is an "0" with Six "_" around (3 (three not tree) at left and 3 at right). What does it mean?
    (In French: L'idéogramme d'alerte, apparu hier en jaune, se présente comme un cercle que flanque de façon concentrique trois tirets à gauche et trois autre symériques à droite. Quelle en est la signification? Est-ce lié à la fuite que je viens de repérer sur l'amortisseur?)



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Audi Master
  • 76,846 Answers

I am very unclear on the trouble light discription, u say it has a tree in it?? is this what you eant?

Posted on Jul 27, 2009

  • yadayada
    yadayada Jul 27, 2009

    please take a digital piture of this indicator and post it here, use the image attachment tool, it is the picture of the tree above to the righ of U Tube.

  • yadayada
    yadayada Jul 27, 2009

    go to this link for a PDF file of your user/owners manual.


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,734 Answers

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I just bought a 1998 Pontiac Bonneville and now the system monitor light is on why and what does that mean?

No other messages in the driver info center ?
This section provides an overview of the instrument cluster operation as well as a detailed diagnosis. The instrument cluster serves as the primary interface for the vehicle's driver.
The instrument cluster contains a microprocessor as part of the instrument panel assembly. The instrument cluster performs the following functions:
• Recognizes operational malfunctions
• Alerts the driver through indicators
• Stores DTCs which identify malfunction areas
In order to perform all of these functions, the instrument cluster microprocessor has its own inputs, outputs and program software. The instrument cluster has the capability to diagnose malfunctions in the following components:
• The sensors
• The input switches
• The components
• The systems the instrument cluster communicates with or controls
When the instrument cluster or another microprocessor-controlled module detects a malfunction, the instrument cluster may turn on an instrument cluster indicator in order to alert the driver that a malfunction has occurred. Some indicator lamps have dual controls. Your best bet is have it checked for DTC'S diagnostic trouble codes !

Mar 02, 2016 | Pontiac Cars & Trucks

4 Answers

Porsche boxster fault diagnosis

the connector is somewhere around the drivers seat, below the seetring weel

I would get a 2nd opinion from another mechanic.

Jul 28, 2008 | 1999 Porsche Boxster

1 Answer

2001 cougar coupe instrument panel went dead while I was driving. All fuses are fine and the lights around the top work but the gauges and digital display do not

Hello! There is a flexible flat connector that supplies the instrument panel...
They are well known to break at the point of the connection...If you can remove the instrument panel and inspect it with a bright light; Look for a solder break where the Orange wire (power feed) enters the panel...

Feb 12, 2012 | Cars & Trucks

1 Answer

I bought a used G37S 2008 no manual; What is the orange light ALERT 1.0 H

It sounds like the "Time to Rest" indicator showing how much time you have left before the time to stop and rest based upon much trip time you put into your trip computer.
Please refer to 2-23, Instruments and Controls, in the manual (link below) on how to configure the Alert options.

Mar 06, 2011 | 2008 Infiniti G37

2 Answers

Hello! 1999 plymouth voyager instrument cluster not working! Wat is the problem?

Instrument panels are computers in them selves. it could have blown. check fuses and have it put on a diagnostic scanner and checked for any codes

Jun 16, 2010 | 1999 Plymouth Voyager

2 Answers

Ocassionaly bogs down and loses power

one thing to try would be to buy a couple bottles of gasline anti-freeze (it absorbs water). add one to your tank now and one the next time you fill up.

Jan 05, 2010 | 2000 Pontiac Montana

1 Answer

Manual lost (in a foreign custom whitch was like a storm)

This symbol means that the brake pads are worn out and need replacing..It will have nothing to do with the shock absorber leak.

Jul 27, 2009 | 1995 Audi A6

1 Answer

Ford explorer 2003 Issue the turn signal indicator lights in the dash went out one a week ago the other yesterday. turn signals are working fine just no indication off the instrument panel. all other...

It seems that the bulbs went out or the ribbon cable that runs behind the instrument panel burned out check on a junkyard for a replacement instrument panel and replace it, verify that the truck you pull out the instrument cluster is the same year and the same model.

Jul 08, 2009 | 2003 Ford Explorer

1 Answer

Headlight switch

This is copied from a manual on CD I have, Hope it is of help.

Instrument Cluster Finish Panel

Removal and Installation
1. Disconnect battery ground cable (14301).

2. Remove headlamp knob from shaft by extending to headlamp ON position. Press clip in slot of knob shaft by inserting a small tool and pulling back; at the same time pull and remove knob.

3. Remove two screws retaining instrument panel finish panel (044D70) above instrument cluster (10849).

4. Pull instrument panel finish panel to unsnap one retaining clip above LH register.

5. Pull instrument panel finish panel on both sides to unsnap two retaining clips.

6. Pull instrument panel finish panel by sides of steering column to unsnap two retaining clips.

7. Pull instrument panel finish panel to unsnap three retaining clips on RH side vertical/horizontal edge and remove instrument panel finish panel.

8. To install, reverse Removal procedure.

Sep 12, 2008 | 1995 Ford Mustang

Not finding what you are looking for?
1995 Audi A6 Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers


Level 3 Expert

76846 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides