Question about Cars & Trucks

Open Question

I have an old15 Merc outboard motor with the gear shift on the tiller. All of a suddenly it won't change gears. It revs up but the prop isn't turning. It just suddenly stopped responding to the tiller

Won't change gears.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 120 Answers

SOURCE: Automatic won`t change above second gear

tranny shop time tranny pump problem

Posted on Feb 19, 2009

  • 10 Answers

SOURCE: Automatic won`t change above second gear

sounds like the selector box at fault but change the auto oil and filter with some treatment and this should solve youre problem

Posted on Feb 19, 2009

princeofscot
  • 288 Answers

SOURCE: transmission will shift, but car won't move.

there is a linkage inside the transmission that came off or lose so you might have to take it to a mechanic to get in there and repair so do not start car no more and you might have to have the car towed to a mechanic to look at it.

Posted on May 27, 2011

  • 3640 Answers

SOURCE: Brake lights won't come on

check for a bad brake light fuse! if not the fuse, the brake light switch operates brake lights and if bad you will not be able to shift it out of park, as well as the brake lights not coming on.! because you have to put foot on brake to do so. if bad switch, it wont let it out of park. it could be just out of adjustment also!! good-day !

Posted on Aug 28, 2011

coskuarsiray
  • 208 Answers

SOURCE: Why my 2007 crown Vic won't shift in gear

this can be due to out of adjutment of shifter cable which releases the shifter when brake is pressed.

Posted on Nov 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Travelling at 100 klh @ 2000 revs kicked down in Polo-revs up to 4500 but would not move up gear(s)


run the fault codes to check for TCM or other problem sensor in the transmission. It may be a protection item as it is unwise to kick down at that speed as kickdowns are used to change to lower gears when going up hill or pulling a load and need a lower gear . They are not meant to pass at speed .It is the same effect bas with a manual in overdrive at 100klms and suddenly shifting into 1st gear

Dec 23, 2014 | Cars & Trucks

1 Answer

1996 toyota camry no gears all of a sudden no prior issues leaking oil wont rev over 3000rpm


Time to rebuild the transaxle

That job is five times the cost of what
the car is worth,get rid of it

Mar 04, 2014 | Cars & Trucks

1 Answer

My rpm rev's past 3 car stalls then shifts...sometimes won't shift


Due for a transaxle rebuild,common on that veh

The fact you continued to drive it when it won't
shift correctly & has been slipping, your done

Aug 30, 2012 | 1998 Plymouth Grand Voyager

1 Answer

Won't shift properly


Your probably pulling OBD Code P0758, just like mine is. Ive changed the trans in a customers car now 3 times with the same result. Hard shift into rev and 2 but no third gear. I believe its the TCM or wiring harness. Check to have the TCM Completely flashed and re-written by the dealer, this may help, if Not replace the TCM is my only other options, because I do not believe that 3 transmissions have been bad.

Jul 15, 2012 | 2008 Ford Fusion

1 Answer

WHen under load the motor revs up and it seems that the Clutch is slipping, it has 100000miles and I suspecting the clutch or the high / low range might be messed up, its a 4 plus 3 manuel transmission.


If it feels like the clutch is slipping, chances are it is. If there was a problem in any component that has internal gears, you would have grinding noises. Gears cannot slip. As the clutch wears more you may hear grinding when you try to change gears but that is because the clutch won't fully disengage so the gears are spinning too fast to shift properly. Before that happens, have the clutch replaced.

Aug 02, 2011 | Chevrolet Corvette Cars & Trucks

2 Answers

How to start Mercedes C180 1999? Is it button start or key start?


i have a c180 merc petrol when starting the starter dosnt engage prop for afew turns then it engages and engine starts i have change the ring gear plus change the starter and still geting the same prob

Jun 28, 2009 | 1999 Mercedes-Benz C-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...