Question about Hyundai Cars & Trucks

Open Question

Older Hyundai elec. The forward/reverse seems to be grounded out.; Nuetral is ok. Either fwd or rev feels like it wants to move, but seems to short out. ????

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: When my car is in Drive it just revs and doesnt move...

Get your transmission position sensor checked. With it being an automatic it doesnt have a clutch

Posted on Feb 02, 2009

  • 4 Answers

SOURCE: 92 camry wont move forward

no, you need a transmission, A used one cost about 3 to 4 hundred dollars at the junk yards

Posted on Apr 06, 2009

  • 2 Answers

SOURCE: 1999 mercury cougar bearly moves when put in gear

Does the fluid smell burt or is it discolored

Posted on Apr 29, 2009

ghost4548
  • 776 Answers

SOURCE: hyundai excel 1996 automatic will engage reverse

It appears you have a Forward Clutch FAILURE. Replace the trans after you get it diagnosed and verified by a professional technician. By the way, do you have a Check Engine light? If so, what is the diagnostic code? The dealership can scan the system and find any codes which may have been stored in the TCM (Transmission Control Module). If there were any 'Incorrect Gear Ratio" codes, it's most probably the trans itself.

Posted on May 28, 2009

hardinfarms
  • 144 Answers

SOURCE: car does not drive forward but works in reverse

Sad to say but your automatic transmission has bit the dust.

Posted on Jul 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reverse it took a few seconds to engage into gear to move when it moved I put it in drive and went forward then a small thumb occur and the motor stopped what


Does it kill the motor when you try to put it in gear now(fwd or rev)? Sounds like the torque converter clutch. Transmission part. Usually at about 150,000 miles. Hope that helps.

Feb 26, 2016 | 2006 Jeep Grand Cherokee

2 Answers

Audi a3 auto reverse gear doesn't move


run fault codes and look for faulty TCM and reverse servo .

Nov 29, 2013 | Audi Cars & Trucks

1 Answer

Wont move in drive.but if you put it in nuetral and rev the motor to1200 rpm and dop it in drive it works fine until you stop again


oil level low ,start engine ,handbrake on then select reverse and then check oil level ,think you are about at a least a litre short

Dec 23, 2010 | Subaru Legacy Cars & Trucks

1 Answer

Recently replaced the transmission with one from a salvage yard. I have to rev the motor in nuetral before transmission will engage after I do that it works as it should, except when I come to a complete...


low transmission fluid level about a litre and a half should cure it at a rough guess ,start engine ,handbrake on then select reverse and then check oil level it definatly sounds low to me

Nov 03, 2010 | Chevrolet Lumina Cars & Trucks

1 Answer

2001 Hyundai Tiburon will not go in reverse, but drives fine otherwise.


Hi There,

As demonstrated in the test drive of the vehicle, the Tiburons gearstick has a little groove just passed the crown. Starting in nuetral - lift groove up and put it into the reverse position (where gear 6 is normally) by doing this lift you take the gear box to a second level. to move out of reverse simply take the gearstick and return it to nuetral then into first gear, you are now able to drive forward.

Hope this helps,

Cheers Buckaroo,
Chris.

Jul 10, 2010 | 2001 Hyundai Tiburon

2 Answers

Hyundai excel 1996 automatic will engage reverse and park but no forward gears. Gearbox was overhauled 3 years ago, new seals etc. Oil level in the main transmission is ok and no apparent leaks. Problem...


It appears you have a Forward Clutch FAILURE. Replace the trans after you get it diagnosed and verified by a professional technician. By the way, do you have a Check Engine light? If so, what is the diagnostic code? The dealership can scan the system and find any codes which may have been stored in the TCM (Transmission Control Module). If there were any 'Incorrect Gear Ratio" codes, it's most probably the trans itself.

May 16, 2009 | 1994 Hyundai Excel

1 Answer

99 jimmy 4wd sl trans issue have fwd & rev but....


It sounds like your describing your torque converter and that its staying unlocked. you might want to check your brake light switch/s if they are malfunctioning it could cause your problem. Also possible that your fuel filter and/or CAT might be clogged.

Apr 25, 2009 | 1999 GMC Jimmy

1 Answer

When my car is in Drive it just revs and doesnt move...


Get your transmission position sensor checked. With it being an automatic it doesnt have a clutch

Feb 02, 2009 | Hyundai Motor 2002 Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...