Question about Cars & Trucks

Open Question

Where is the trip switch on a caravan crown magnum 482

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have recently bought an Eldiss Affinity 482 caravan. When on road it makes creaking noises which are very loud. Has anyone else had this problem


I would need to hear this noise to ascertain what is causing it. As a guess I would think the rubber bushings in the suspension are in need of replacing. As far as this model it is not sold here in the USA that I know of.

Jun 22, 2017 | Cars & Trucks

1 Answer

Stalling


first scan for engine code.Codes P0600, P2105, P2107.
throttle body is common problem with ford
second connect fuel pressure gauge and drive
General Specifications
Item Specification Fuel tank capacity 71.9L (19 gal) Fuel Pressure Hot restart 448-482 kPa (65-70 psi) Key ON Engine OFF (KOEO) 140-415 kPa (20-60 psi) Key ON Engine Running (KOER) 170-280 kPa (25-40 psi)

Mar 23, 2014 | 2006 Ford Crown Victoria

1 Answer

Mcb triping in caravan.


Yes it is probably the charger. If the system works with just the battery in the circuit, it would eliminate the majority of the wiring. The problem could still be wiring, but between the charger and the battery. Check all the connections before you go changing anything.

May 06, 2013 | 1997 Dodge Caravan

1 Answer

I have 2004 Ford Crown Victoria for a month, fuel pump not working, due to no power supply.


There is a fuel inertia switch located in the trunk compartment to the left (drivers side), behind the carpet. I would try there before anything else. The switch will just have to be pushed back in if it has tripped. Hope this helps and good luck!

Jun 12, 2010 | 1992 Ford Crown Victoria

1 Answer

Car went for oil change was completed then car wont run starts then stalls with in 2 seconds restart and stalls again can hear fuel pump and has fuel ?????


there is a cut off switch in the trunk that trips if your car is struck. Its call a fuel cut of switch. look in you owners manual, it is in the trunk black with a red button on top, push to reset.... it should click if its been tripped .. Hope this helps

May 19, 2010 | 2003 Ford Crown Victoria

1 Answer

Crown Vic wont turn over.


I would check the plugs around and on the engine. Also check to see if the inertia switch in the trunk was tripped, that cuts off power to the fuel pump in an accident.

May 11, 2010 | 1984 Ford Crown Victoria

1 Answer

P0406 code is shown


po406 is egr senor code, this is part of egr, dodge has a lot of problems with this valve, ive replaced about 20 of them on magnums and caravans, to solve this problem, replace the egr valve and reset the codes, the valves not to expensive, its about $60.00, heres a picture of it.hope this helps,6cfb4c1.jpg

Feb 19, 2010 | 2005 Dodge Magnum

1 Answer

Brake lights not working


Check the fuses, and check the brake light switch, which is usually found up under the dashboard attached to the pedal arm. Make sure the connector in OK, the switch activates with the movement of the pedal. failing that replace the switch.

Hope this is of some assistance.
Ed

Apr 20, 2009 | 1989 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...