Question about Cars & Trucks

Open Question

Hi i want to know in mira how 4wheel drive all the time works

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
clarktravis8
  • 74 Answers

SOURCE: part-time 4wheel drive

you have a bad or faulty sensor that communicates the 4wd position to the dash the sensor is on the top front of the transfer case. Find a large open area and drive in reverse for about 500 feet then put car in drive and pull forward this might enable the sensor to know what position the transfer case is in The transfer case is connected to the transmission and also to the front and rear axles by means of drive shafts. If this doesn't work change you sensor on the top front of your transfer case. hope this helps you please rate me and for further assistance you can always ask me. wutxtye0rjd9d9ekmodqt1eoxkvn9hr9qjz1l3dabggyud7sdgr36czsrfxqenadhnijx9nfayi+sz1sug0aaaaasuvork5cyii=

Posted on Apr 25, 2009

Ad
  • 16 Answers

SOURCE: 1984ford f150 Ido not know how to put the truck into 4wheel drive

There should be a lever shifter on the floor board with 2h- 4h-4L on the knob. Pull or push the lever to 4H then get out and go to the front axle. In the middle of the front tires there should be a locking front hub assembly, turn the selector to lock, do this on both wheels, your truck should now be in 4 wheel drive. To put it in 4L you need to havt the transmission in nuetral before you shift the lever. Once done playing make sure you unlock your front axel(hubs) and place the lever in 2H.

Posted on Oct 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When pushing button for 4wheel drive, the amber flashes continully. does not go into 4wheel drive


It will eventually. most likely the electrical connections under truck got wet and stops the operation your explaining. My 03 yukon xl does this all the time. when i shut it off next day i start and it works. sometimes the 4 lo light comes on yet it is still in 2 hi. other days they all flash. somedays the red nuetral light is on yet i'm driving. Damn electronics. My ford explorer is the same way. I never get the underbody wash either as this leads to two days of flashing.

Feb 08, 2011 | 1997 GMC Suburban

1 Answer

4 wheel drive quit at some time didn't know it...drives fine only rear wheels pulling..could it be electrical ??


I hava a 1999 Grand cherokee loredo V8 with full time 4wheel drive. when the rear tires slip I am hearing a poping noise in the front end when the 4wheel drive engages. I was told by one person that it could be the chain in the transfer case slipping but I was told by a jeep salesman that this year jeep did not have a chain. Could this be the CV joints in the front axels?

Jan 11, 2011 | 1999 Jeep Grand Cherokee

1 Answer

Cant get it out of 4wheel drive i switched it over to 4wheel drive without putting it into neutral


- sent by jglaubitz via email -

The solution to the problem of the 1998 ford explorer was shutting the vehicle off in neutral tapping on swith a couple of times to get the 4wheel drive to disingage. eventually a new swith will have to be purchased.

Jan 19, 2010 | 1998 Ford Explorer

2 Answers

I have a 2002 Trailblazer. The 4wheel drive service light is on what should I do? The 4wheel drive isn't working at all. Can I continue to drive in 2 wheel High until I get to dealer?


Your fine to drive it on 2wd till you make it to the dealer, but in the mean time check your 4wd fuse. The 4X4 encoder motor is know to blow fuses in cold days and it's a simple fix by replacing a fuse for 35 cent then having a dealer replace it for $65.00 service charge. Good luck and hope ti's a simple fuse that has gone bad, there common to go bad when 4wd is engaged during cold operation.

Dec 26, 2009 | 2003 Chevrolet TrailBlazer

1 Answer

1984ford f150 Ido not know how to put the truck into 4wheel drive


There should be a lever shifter on the floor board with 2h- 4h-4L on the knob. Pull or push the lever to 4H then get out and go to the front axle. In the middle of the front tires there should be a locking front hub assembly, turn the selector to lock, do this on both wheels, your truck should now be in 4 wheel drive. To put it in 4L you need to havt the transmission in nuetral before you shift the lever. Once done playing make sure you unlock your front axel(hubs) and place the lever in 2H.

Oct 25, 2009 | 1984 Ford F 150

1 Answer

My 1997 chevy blazer does not have a 4wheel drive switch


If there is no switch present then it is full time 4X4, it does not disengage, good for travel bad for fuel mileage.

Sep 08, 2009 | 1997 Chevrolet Blazer

1 Answer

Part-time 4wheel drive


you have a bad or faulty sensor that communicates the 4wd position to the dash the sensor is on the top front of the transfer case. Find a large open area and drive in reverse for about 500 feet then put car in drive and pull forward this might enable the sensor to know what position the transfer case is in The transfer case is connected to the transmission and also to the front and rear axles by means of drive shafts. If this doesn't work change you sensor on the top front of your transfer case. hope this helps you please rate me and for further assistance you can always ask me. wutxtye0rjd9d9ekmodqt1eoxkvn9hr9qjz1l3dabggyud7sdgr36czsrfxqenadhnijx9nfayi+sz1sug0aaaaasuvork5cyii=

Apr 10, 2009 | 2003 Jeep Liberty

1 Answer

2005 jeep liberty 4 weel drive will not engage


I just bought a jeep liberty, 2005. It's automatic with 4wheel drive option. I do not have an owners manual. Do not know how to engage the 4wheel drive. I have never had a 4wheel drive vechile before.

Jan 15, 2009 | 2003 Jeep Liberty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...