Question about Dodge Cars & Trucks
I just replaced my battery and alternator, I did how ever ark My car and this problem is still occurring. any suggestions on what is could be?
Posted by Anonymous on
What do you mean by 'ark my car'? If you intentionally created an electrical arc with battery or alternator wiring, as was a 'common practice' with old dc generator type systems to set polarity, you may have damaged your alternator, or worse, your PCM. Do you have a check engine light, and have you read the codes? You may want to consider having a qualified mechanic check out your electrical system.
Posted on Aug 09, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is 2 bolts on top 1 top outer and 1 top front behind grill, u need to remove the top center black cover and 1 bottom side outer need to remove the inner finder liner to get to the 3rd bolt.
hope that helps, it is stupid
Posted on Mar 23, 2009
SOURCE: Battery changing
Ok, trust me on this one, take the drivers side tire off and remove the forward inner fender panel. If you try it without removing the tire, it is just a royal pain.
Posted on Jun 10, 2009
It is in the drivers side fender well in front of the tire, it is mounted to the front frame rail. You have to remove the plastic fender lining to get to it.
Posted on Dec 14, 2009
Not sure if this will work for you but worth a shot. I own a 2005 dodge neon. I know the ecu's are different but maybe dodge was smart and made all the cars this way. Insert you key into ignition. Turn key forward until you are at the last position right before the car starts to crank over. Repeat this for a total of three times then on your digital odometer display, you will see a set of numbers displayed. this will be your code for the malfanction(s) that set your check engine light. Like I said, it might not work on your car but give it a shot. If not, rent an obdII scanner and get your codes. Then you know where to start looking to fix your problem.
Posted on Dec 17, 2009
SOURCE: Brake Fluid for 2008 Avenger
it's DOT 4 or DOT 5 check with your manual and sometimes it's even in the fluid fill cap.
Posted on Feb 22, 2010
Testimonial: "Quick response, guided me in the right direction. Thanks!"
Tips for a great answer:
Mar 08, 2017 | 2008 Dodge Avenger
Dec 23, 2014 | 2008 Dodge Avenger
Aug 06, 2014 | 2008 Dodge Avenger
Aug 24, 2013 | 1999 Dodge Avenger
Feb 16, 2013 | 2008 Dodge Avenger
Feb 14, 2012 | 2008 Dodge Avenger
Car not starting or turning over indicates towards multiple possibilities.
It can be issue with battery or weak battery. But if battery checks out ok, then
it can be starter issue or faulty alternator or problem with low fuel pressure
or no spark at spark plugs due to dirty spark plugs or faulty
ignition coil or injectors getting cracked or dirty and needs to be cleaned.
To confirm the problem, the basic troubleshooting is required.
Click this link below and follow the troubleshooting:------
This will help.
Feb 13, 2012 | 2008 Dodge Avenger
Mar 27, 2011 | 2008 Dodge Avenger
Dec 13, 2009 | 2008 Dodge Avenger
21 people viewed this question
Usually answered in minutes!